Main Picture
Standard Abrasives™ Quick Change P.A.R.T. GP Disc, 800068, A/O Medium, TSM, Maroon, 5/8 in (16 mm), Die QS62HM, 50/Carton, 500 ea/Case
Standard Abrasives™ Quick Change P.A.R.T. GP Disc, 800068, A/O Medium, TSM, Maroon, 5/8 in (16 mm), Die QS62HM, 50/Carton, 500 ea/Case
3M ID 7000122087 SAP ID 7000122087 Local Catalog Identifier STA-800068 Keywords 3M, Standard Abrasives, Quick Change P.A.R.T. GP Disc, paint anodize removal tool, electrical grounding contact points, remove surface contaminants, remove paint or primer, self-aligning centre hole, Quick Change TS attachment, resin-reinforced nylon fibers, aluminum oxide mineral, abrasive disc, fine finish, P.A.R.T. Disc Mandrel, industrial applications, non-ferrous metals, prevent rust and corrosion, clamp down accessory, clean workpiece hole, flexible GP surface conditioning, small diameter disc, coarser grade disc, finer grade disc, wipe out compounds, remove anodized layers, metal surface cleaning, high performance abrasives, metalworking industry, quality abrasives. Brand Standard Abrasives™ Global Product Hierarchy Quick Change Discs Base (B) - Article Number 00051115368530 Unit of Use (1) - Article Number 00051115368530 Inner (3) - Article Number 30051115368531 Shipper (6) - Article Number 50051115368535 Marketplace Formal Name Standard Abrasives™ Quick Change P.A.R.T. GP Disc, 800068, A/O Medium, TSM, Maroon, 5/8 in (16 mm), Die QS62HM, 50/Carton, 500 ea/Case Material Description SA 800068 AMED 5/8inTSM QS62HM 50/500 DC Marketplace Description The Standard Abrasives™ Quick Change P.A.R.T. GP Disc is a 5/8˝ diameter paint anodize removal tool, sized specifically for cleaning anodized layers from electrical grounding contact points or other small holes in metal surfaces. Marketplace Description Extended Remove Anodized Layers on Holes: Applying anodized layers to non-ferrous metals is often an important step in many industrial applications; it helps protect the metal surface from rust and corrosion. While desirable, anodized layers can also impede strong connections between metal parts, especially where nuts and bolts are concerned. The thin layer of paint between the workpiece and bolt may inhibit the accessory’s ability to clamp down or fasten as tightly as it could. We engineered the Standard Abrasives™ P.A.R.T. GP Disc to help users tackle these issues. The center hole on our Standard Abrasives™ P.A.R.T. GP Disc self-aligns, so users may clean the surface around the hole without damaging or removing the anodized layer from surrounding workpiece areas. Moreover, the flexible GP surface conditioning material on the disc conforms to contours, radii and I.D. areas, so users can easily maneuver the abrasive around holes. Tough, resin-reinforced nylon fibers withstand repeated wear but also break down to reveal fresh mineral, so the abrasive keeps cutting sharp and delivers a consistent cut. Interspersed with aluminum oxide mineral, it cuts aggressively while leaving a fine finish. Small Size, Quick Change Attachment: We designed our Standard Abrasives™ P.A.R.T. GP Disc with small diameters, so it would be able to clean around even the tiniest of holes. Users can choose from a range of sizes and select the disc that’s best suited to their project needs. The P.A.R.T. GP disc features a Quick Change TS attachment, so users can easily fasten these discs to tools using a holder pad. It’s advisable for users to select a coarser grade disc when the anodized layer or corroded surface is really thick and a finer grade when the layer is thin. Wipe Out Compounds: When removing anodized layers from metals parts, it’s common for operators to use compounds or chemicals to try and extract the special coating. This process may end up being messy, time consuming or, when removing anodized layers from holes, difficult to achieve altogether. We designed our Standard Abrasives™ P.A.R.T. GP Disc to help operators lift anodized layers from holes without doing damage to the rest of the workpiece and without having to work with messy compounds. With this paint removal disc, you can clean holes and still maintain the coating that will prevent your workpiece from corroding. Quality Standard Abrasives™ Solutions for Industrial Applications: The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines. Bullets - Aluminum Oxide mineral cuts sharp while leaving a fine finish
- Available in a range of grades, so users can select the right disc for the desired results
- Center hole diameter self-aligns so disc will only clean workpiece hole and maintain anodized layer that surrounds it
- Features Quick Change TS attachment for easy swap out of discs
- P.A.R.T. Disc Mandrel required, sold separately
- Resin-reinforced nylon fibers stand up to repeated wear, prolonging abrasive service life
- Specialized disc effectively removes surface contaminants, paint or primer at electrical grounding contact points
Abrasive Material Aluminum Oxide Attachment Type TSM Backing Weight Non Pertinent Center Hole Thread Size Non Pertinent Grade Medium Grit Non Pertinent Maximum Speed 12000 rpm Micron Grade Non Pertinent Overall Diameter (Imperial) 0.625 in Overall Diameter (Metric) 15.875 mm Product Color Maroon Product Form Disc Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 2 days SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 0.75438 IN3 Base (B) - Customary Gross Weight 0.01074 LB Base (B) - Customary Net Weight 0.009 LB Base (B) - Metric Net Weight 0.004082 KG Base (B) - Metric Cubic Dimension 12.362 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Unit of Use (1) - Billing Unit EA Unit of Use (1) - Customary Cubic Dimension 0.75438 IN3 Unit of Use (1) - Customary Gross Weight 0.01074 LB Unit of Use (1) - Customary Net Weight 0.009 LB Unit of Use (1) - Metric Weight 0.004872 KG Unit of Use (1) - Metric Net Weight 0.004082 KG Unit of Use (1) - Metric Cubic Dimension 12.362 CCM Unit of Use (1) - Item Quantity 1 Unit of Use (1) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Billing Unit EA Inner (3) - Customary Cubic Dimension 26.78806 IN3 Inner (3) - Customary Gross Weight 0.50208 LB Inner (3) - Customary Net Weight 0.45004 LB Inner (3) - Customary Height Dimension 2.99213 IN Inner (3) - Customary Length Dimension 2.99213 IN Inner (3) - Customary Width Dimension 2.99213 IN Inner (3) - Metric Weight 0.2277 KG Inner (3) - Metric Net Weight 0.2041 KG Inner (3) - Metric Cubic Dimension 438.976 CCM Inner (3) - Metric Height Dimension 7.6 CM Inner (3) - Metric Length Dimension 7.6 CM Inner (3) - Metric Width Dimension 7.6 CM Inner (3) - Item Quantity 50 Inner (3) - Unit KAR Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 377.18679 IN3 Shipper (6) - Customary Gross Weight 5.37138 LB Shipper (6) - Customary Net Weight 4.50041 LB Shipper (6) - Customary Height Dimension 3.77953 IN Shipper (6) - Customary Length Dimension 15.55118 IN Shipper (6) - Customary Width Dimension 6.41732 IN Shipper (6) - Metric Weight 2.436 KG Shipper (6) - Metric Net Weight 2.041 KG Shipper (6) - Metric Cubic Dimension 6180.96 CCM Shipper (6) - Metric Height Dimension 9.6 CM Shipper (6) - Metric Length Dimension 39.5 CM Shipper (6) - Metric Width Dimension 16.3 CM Shipper (6) - Item Quantity 500 Shipper (6) - Unit CS Pallet (8) - Item Quantity 0