Main Picture
Scotch-Brite™ EX2 Deburring Wheel X2-WL, 8A Medium, 12 in (304.8 mm) x MISC x 5 in (127 mm), Configurable
Scotch-Brite™ EX2 Deburring Wheel X2-WL, 8A Medium, 12 in (304.8 mm) x MISC x 5 in (127 mm), Configurable
3M ID 7100130673 SAP ID 7100130673 Keywords ex2, deburring wheel, surface conditioner, 3m deburring wheel, abrasive Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Marketplace Formal Name Scotch-Brite™ EX2 Deburring Wheel X2-WL, 8A Medium, 12 in (304.8 mm) x MISC x 5 in (127 mm), Configurable Material Description X2-WL 8A MED 12 x MISC x 5 CONFIG WL Marketplace Description Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs. Marketplace Description Extended Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives. Our Scotch-Brite™ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into nonwoven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Minimizes heat build up to lessen impact on heat-sensitive materials
- Resists smearing for cleaner surfaces and less preparation
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
Abrasive Material Aluminum Oxide Attachment Type Center Hole Center Hole Diameter (Imperial) 5 in Center Hole Diameter (Metric) 127 mm Density 8 Grade Medium Grit Non Pertinent Overall Diameter (Imperial) 12 in Overall Diameter (Metric) 304.8 mm Product Form Convolute Wheel Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 28 SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit EA Base (B) - Pallet Layer Quantity 1.00 Base (B) - Shipping Container Per Layer Quantity 999 Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Previous Packaging Level Quantity 1.00 Shipper (6) - Item Quantity 0 Shipper (6) - Total Unit Quantity 1.00 Pallet (8) - Previous Packaging Level Quantity 0.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 0 Pallet (8) - Total Unit Quantity 999.00 Pallet (8) - Pallet Layer Quantity 1.00 Pallet (8) - Shipping Container Per Layer Quantity 999