Main Picture
3M™ PPS™ Mix Ratio Inserts, 16091, Large (28 fl oz), 10 per pack, 10 packs per case
3M™ PPS™ Mix Ratio Inserts, 16091, Large (28 fl oz), 10 per pack, 10 packs per case
3M ID 7000028411 SAP ID 7000028411 Legacy SKU 60980045102 Part Number 16091 Local Catalog Identifier 16091 Base SKU B40069965 Keywords - 3m pps, 3m pps adapter, pps, 3m pps cups, 3m pps system, pps system 3m, 3m cup liners, 3m cups, 3m performance spray gun, car paint spraying,
- PPS
Brand PPS™ Global Product Hierarchy Spray Cup Accessories Commodity 3340 - PAS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051131160910 Unit of Use (1) - Article Number 00051131160910 Shipper (6) - Article Number 50051131160915 Marketplace Formal Name 3M™ PPS™ Mix Ratio Inserts, 16091, Large (28 fl oz), 10 per pack, 10 packs per case Material Description 16091,PPS MIX RATIO INSERT, GENERIC-LRG Marketplace Description 3M™ PPS™ Mix Ratio Inserts help mix paint according to manufacturer guidelines for the 3M™ PPS™ (Legacy) paint preparation system. Mix ratio inserts are available for various cup sizes and manufacturers. 3M™ PPS™ is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials. Marketplace Description Extended Accurate Paint Measurement Made Faster and Easier 3M™ PPS™ Mix Ratio Inserts make it easy to mix the appropriate amount of paint for use with the 3M™ PPS™ (Legacy) paint preparation system. Mix ratios printed on the film insert take all the guesswork out of how much to use. With the insert in the cup, the measuring process is much like using a metal mix stick. You look down into the cup as ingredients are poured, making it simple to see exactly what you need. We offer a wide variety of ratio inserts customized to specific cup sizes and manufacturers. Advantages of the 3M™ PPS™System Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, youre ready to start spraying. Your Spray Gun Functions at any Angle, Even Upside Down PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees. Clean Up is a Breeze and Uses Less Solvent After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. A Versatile System that Works with Most Spray Guns Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. Reduces the Chance of Contamination Between Jobs Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. The Bottom Line: Why 3M is the Paint & Coatings Spray System of Choice 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup. Bullets - 3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
- Mix ratio inserts assist in the measuring process with 3M™ PPS™ (Legacy) paint preparation system
- PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%
- System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use
- System enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down)
- The all-in-one solution reduces the chance of outside contamination and reduces paint consumption
Application - Paint Application
- Spraying paint
Capacity (Imperial) 28 fl oz Capacity (Metric) 0.828 l Cup Size Large Sub Applications Painting Volume (Imperial) 28 fl oz Volume (Metric) 850.0 mL ECCN EAR99 Harmonized Tariff Schedule Nbr 3920620050 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit CS SAP Shelf Life In Days 0 Target Warehouse Location Lead Time 2 days SAP External Material Group 25000000 Base (B) - Billing Unit SH Base (B) - Customary Cubic Dimension 0.77867 IN3 Base (B) - Customary Gross Weight 0.01123 LB Base (B) - Customary Net Weight 0.0099 LB Base (B) - Metric Net Weight 0.00449 KG Base (B) - Metric Cubic Dimension 12.76 CCM Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit SH Base (B) - Pallet Layer Quantity 35.00 Base (B) - Shipping Container Per Layer Quantity 28 Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit SH Shipper (6) - Customary Cubic Dimension 77.8666 IN3 Shipper (6) - Customary Gross Weight 1.12301 LB Shipper (6) - Customary Net Weight 0.99005 LB Shipper (6) - Customary Height Dimension 1.1811 IN Shipper (6) - Customary Length Dimension 10.66929 IN Shipper (6) - Customary Width Dimension 6.1811 IN Shipper (6) - Metric Weight 0.5093 KG Shipper (6) - Metric Net Weight 0.449 KG Shipper (6) - Metric Cubic Dimension 1276.0 CCM Shipper (6) - Metric Height Dimension 3.0 CM Shipper (6) - Metric Length Dimension 27.1 CM Shipper (6) - Metric Width Dimension 15.7 CM Shipper (6) - Previous Packaging Level Quantity 100.00 Shipper (6) - Previous Packaging Level Unit SHTS Shipper (6) - Item Quantity 100 Shipper (6) - Total Unit Quantity 100.00 Shipper (6) - Item Unit SHTS Shipper (6) - Unit CS Pallet (8) - Billing Unit SH Pallet (8) - Customary Cubic Dimension 93122.59718 IN3 Pallet (8) - Customary Gross Weight 1131.165 LB Pallet (8) - Customary Net Weight 970.2441 LB Pallet (8) - Customary Height Dimension 46.85039 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 513.0 KG Pallet (8) - Metric Net Weight 440.02 KG Pallet (8) - Metric Cubic Dimension 1526000.0 CCM Pallet (8) - Metric Height Dimension 119.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Previous Packaging Level Quantity 980.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 98000 Pallet (8) - Total Unit Quantity 98000.00 Pallet (8) - Item Unit SHTS Pallet (8) - Unit PAL Pallet (8) - Pallet Layer Quantity 35.00 Pallet (8) - Shipping Container Per Layer Quantity 28