Main Picture
Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, 07516, SC-DR, SiC Super Fine, TR, 2 in, 25/Carton, 100 ea/Case
Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, 07516, SC-DR, SiC Super Fine, TR, 2 in, 25/Carton, 100 ea/Case
3M ID 7000028509 SAP ID 7000028509 Legacy SKU 61500141991 Part Number 07516 Product Number SC-DR Base SKU B40064719 Keywords - 3M, Scotch-Brite, Roloc, surface conditioning disc, quick change attachment, non-woven fiber, aluminum oxide, silicon carbide, blending, deburring, finishing, grinding, polishing, radiusing, refining, surface preparation, metalworking, woodworking, abrasives, industrial abrasives, metal fabrication, equipment maintenance, facility maintenance, automotive, collision repair, marine, oil and gas, rail transportation, personal recreation vehicles, commercial vehicles, construction, manufacturing, easy attachment, high cut-rate, low heat retention, durable abrasive, load resistant, consistent finishing, undercutting, gouging, irregular surfaces, contoured surfaces.
- 3m die grinder roloc disc inch sanding grinding discs bits attachments standard abrasives quick change bristle scotch brite wheel abrasive wheels shank drill air angle roll lock bit power clean strip surface conditioning attachment disc pads disks SiC AO SC nonwoven multipurpose general purpose
Brand Scotch-Brite™ Global Product Hierarchy Quick Change Discs Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Consumer (2) - Article Number 00051131075160 Shipper (6) - Article Number 50051131075165 Marketplace Formal Name Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, 07516, SC-DR, SiC Super Fine, TR, 2 in, 25/Carton, 100 ea/Case Material Description 07516 SC-DR S SFN 2in TR 25/100 DC Marketplace Description Scotch-Brite™ Roloc™ SC Surface Conditioning Discs combine durable, nonwoven disc with the efficiency of the 3M™ Roloc™ quick-change attachment system for an effective disc that cleans, finishes, blends, and deburrs. The nonwoven fiber construction conforms well to help preserve irregular or contoured surfaces and the Roloc™ backing supports the disc for aggressive cutting. Marketplace Description Extended The open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. Our 3M™ Roloc™ attachment system offers quick and easy disc change-out, making the Roloc™ SC Surface Conditioning Disc ideal for a range of tasks including blending, deburring, and finishing. We use aluminum oxide abrasive in Scotch-Brite™ Roloc™ SC Surface Conditioning Discs. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. We developed Scotch-Brite™ surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc. 3M™ Roloc™ TR quick change discs are smaller discs that have a plastic threaded button or screw designed to easily and quickly screw onto a Roloc™ TR disc pad (sold separately) so that you can conveniently change discs with a simple twist-off, twist-on motion. The Roloc TR system provides a secure attachment even for heavy-duty applications, and the variety of available 3M™ Roloc™ discs allows swapping from one application to the next in seconds. Bullets - AVAILABLE IN A RANGE OF GRADES: Choose from Super Fine (SFN), Very Fine (VFN), Medium (MED), and Coarse (CRS) to fit your application needs
- CHOOSE YOUR MINERAL: Discs are available either powered by super-sharp silicon carbide (SiC) that excels in low-pressure and fine finishing applications or made from harder and more durable aluminum oxide (A/O)
- CONFORMABLE NONWOVEN WEB: Springy nonwoven fibers resist loading, conform to irregular or contoured surfaces, and minimize undercutting and gouging
- GREAT FOR LOW-TO-MEDIUM PRESSURE: Built for consistency in blending, cleaning, deburring, finishing, grinding, polishing, radiusing, refining, and surface preparation, depending on the chosen grade
- QUICK AND EASY ATTACHMENT: Convenient 3M™ Roloc™ Attachment System allows for fast disc changes
- WORKS ON A RANGE OF METALS: This multipurpose option is great for use on aluminum, mild steel, nickel alloy, stainless steel, and titanium
Abrasive Material Silicon Carbide Application - Cleaning
- Polishing
Attachment Type TR Backing Material Non-woven Backing Weight Non Pertinent Center Hole Thread Size Non Pertinent Grade Super Fine Grit Non Pertinent Maximum Speed 25000 rpm Micron Grade Non Pertinent Overall Diameter (Imperial) 2 in Overall Diameter (Metric) 50.8 mm Product Color Gray Product Form Disc Sub Applications - Light Polishing
- Light Coating Removal
- Contour Finishing
Substrate - Nickel Alloy
- Stainless Steel
- Aluminum
- Titanium
- Mild Steel
ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit KAR SAP Shelf Life In Days 1825 Target Warehouse Location Lead Time 2 days SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 6.28272 IN3 Base (B) - Customary Gross Weight 0.02051 LB Base (B) - Customary Net Weight 0.0103 LB Base (B) - Metric Net Weight 0.00467 KG Base (B) - Metric Cubic Dimension 102.955 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Billing Unit EA Consumer (2) - Customary Cubic Dimension 106.45023 IN3 Consumer (2) - Customary Gross Weight 0.37656 LB Consumer (2) - Customary Net Weight 0.25743 LB Consumer (2) - Customary Height Dimension 3.50394 IN Consumer (2) - Customary Length Dimension 5.51181 IN Consumer (2) - Customary Width Dimension 5.51181 IN Consumer (2) - Metric Weight 0.170777 KG Consumer (2) - Metric Net Weight 0.11675 KG Consumer (2) - Metric Cubic Dimension 1744.4 CCM Consumer (2) - Metric Height Dimension 8.9 CM Consumer (2) - Metric Length Dimension 14.0 CM Consumer (2) - Metric Width Dimension 14.0 CM Consumer (2) - Item Quantity 25 Consumer (2) - Unit KAR Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 628.27137 IN3 Shipper (6) - Customary Gross Weight 2.05065 LB Shipper (6) - Customary Net Weight 1.02974 LB Shipper (6) - Customary Height Dimension 4.43661 IN Shipper (6) - Customary Length Dimension 11.9 IN Shipper (6) - Customary Width Dimension 11.9 IN Shipper (6) - Metric Weight 0.93 KG Shipper (6) - Metric Net Weight 0.467 KG Shipper (6) - Metric Cubic Dimension 10295.483 CCM Shipper (6) - Metric Height Dimension 11.269 CM Shipper (6) - Metric Length Dimension 30.226 CM Shipper (6) - Metric Width Dimension 30.226 CM Shipper (6) - Item Quantity 100 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 111246.71996 IN3 Pallet (8) - Customary Gross Weight 330.05543 LB Pallet (8) - Customary Net Weight 148.28184 LB Pallet (8) - Customary Height Dimension 55.23622 IN Pallet (8) - Customary Length Dimension 47.99213 IN Pallet (8) - Customary Width Dimension 41.9685 IN Pallet (8) - Metric Weight 149.685 KG Pallet (8) - Metric Net Weight 67.248 KG Pallet (8) - Metric Cubic Dimension 1823000.0 CCM Pallet (8) - Metric Height Dimension 140.3 CM Pallet (8) - Metric Length Dimension 121.9 CM Pallet (8) - Metric Width Dimension 106.6 CM Pallet (8) - Item Quantity 14400 Pallet (8) - Unit PAL