Main Picture
Scotch-Brite™ Clean and Strip Unitized Wheel, CS-UW, 7S Extra Coarse, 3 in x 1/2 in x 1/4 in, 20 ea/Case
Scotch-Brite™ Clean and Strip Unitized Wheel, CS-UW, 7S Extra Coarse, 3 in x 1/2 in x 1/4 in, 20 ea/Case
3M ID 7000045856 SAP ID 7000045856 Legacy SKU 61500005915 Base SKU B40071664 Keywords 3M, Scotch-Brite, Clean and Strip Unitized Wheel, coating removal, weld cleaning, rust removal, paint removal, abrasive wheel, durable unitized construction, low conformability, aggressive cutting, low conformability wheel, extra coarse abrasive, heat resistant, debris escape, synthetic fibers, silicon carbide mineral, open web construction, portable tools, die grinders, metalworking, surface contaminants removal, weld discoloration removal, high-production environments, abrasive service life, manufacturing, transportation, personal recreation vehicles, two wheel vehicles. Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011010090 Unit of Use (1) - Article Number 00048011010090 Shipper (6) - Article Number 50048011010095 Marketplace Formal Name Scotch-Brite™ Clean and Strip Unitized Wheel, CS-UW, 7S Extra Coarse, 3 in x 1/2 in x 1/4 in, 20 ea/Case Material Description CS-UW 7S XCRS 3 x 1/2 x 1/4in 20 WL Marketplace Description The Scotch-Brite™ Clean and Strip Unitized Wheel is a unitized wheel made for aggressive coating removal, cleaning welds, and removing rust, paint and coatings. The layered, durable unitized wheel construction and hard 7 density, with low conformability, make it a great match for edges, when durability is a must. Marketplace Description Extended Remove Unwanted Coatings: Among its features, Scotch-Brite™ Clean and Strip Unitized Wheel has a few abrasive elements that make it uniquely suited for applications like coating removal. First, it has a durable unitized construction that won’t yield or deflect to surface irregularities, ensuring an ongoing, aggressive cut. Second, it is made with open web, which helps minimize clogging and loading when removing these coatings. Peeling back the paint, here’s how Scotch-Brite™ Clean and Strip Unitized Wheel is engineered. To help with your toughest cleaning applications, we intersperse extra coarse (XCS) silicon carbide mineral on synthetic fibers using resin. The coarse grade helps the abrasive cut more aggressively than minerals of a finer grade. While silicon carbide breaks down faster than aluminum oxide, it produces a brighter finish. It cuts sharply to effectively remove scale, rust, surface contaminants, paints, coatings, weld discoloration and splatter. The unitized construction of Scotch-Brite™ Clean and Strip Unitized Wheel further lends itself to aggressive cutting action. To create a unitized wheel, we compress layers of open web material together during wheel production. Having multiple layers melded together enhances the abrasive’s overall ability to aggressively tackle the substrate. Resist Loading: Finally, the open web helps with the loading that is commonly found in high-production environments and during soft coating removal. Gaps between the nylon fibers permit debris to escape, minimizing loading and premature clogging - which, in turn, prolongs abrasive service life. As the fibers break down, they reveal fresh, sharp mineral, so you get a consistent cut - part after part. This dense and durable wheel works well with a variety of portable tools, including die grinders, to reach tight or confined areas. When it comes to peeling back the paint, trust our Scotch-Brite™ Clean and Strip Unitized Wheel to help you unearth the layers underneath. Bullets - ACCESS HARD-TO-REACH AREAS: Designed for effective performance in challenging spaces
- CONSISTENT COATING REMOVAL: Resists heat buildup and loading on soft coatings, allowing prolonged operation
- MORE EFFECTIVE AND SAFER: Provides smoother running and superior performance for coating and corrosion removal compared to wire wheels and cups
- STRONG CUTTING ACTION: Extra coarse abrasive and low conformability ensure effective material removal without damaging the base material
- VERSATILE OPERATION: Tough, layered, unitized construction can operate in both clockwise and counterclockwise directions
Abrasive Material Silicon Carbide Application - Surface Preparation
- Grinding
Center Hole Diameter (Imperial) 0.25 in Center Hole Diameter (Metric) 6.35 mm Density 7 Face Width (Imperial) 0.5 in Face Width (Metric) 12.7 mm Grade Extra Coarse Grit Non Pertinent Maximum Speed 20100 rpm Overall Diameter (Imperial) 3 in Overall Diameter (Metric) 76.2 mm Product Color Black Product Form Unitized Wheel Sub Applications - Paint Removal
- Chrome Stripping
- Slab Cleaning
- Paint Stripping
- Coating Removal
- Rust Removal
Substrate All Metal ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 2 days SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 2.25001 IN3 Base (B) - Customary Gross Weight 0.12352 LB Base (B) - Customary Net Weight 0.10474 LB Base (B) - Customary Height Dimension 0.25 IN Base (B) - Customary Length Dimension 3 IN Base (B) - Customary Width Dimension 3 IN Base (B) - Metric Net Weight 0.0475 KG Base (B) - Metric Cubic Dimension 36.870894 CCM Base (B) - Metric Height Dimension 0.635 CM Base (B) - Metric Length Dimension 7.62 CM Base (B) - Metric Width Dimension 7.62 CM Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit EA Base (B) - Pallet Layer Quantity 10.00 Base (B) - Shipping Container Per Layer Quantity 42 Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 209.31226 IN3 Shipper (6) - Customary Gross Weight 2.47048 LB Shipper (6) - Customary Net Weight 2.09475 LB Shipper (6) - Customary Height Dimension 4.40945 IN Shipper (6) - Customary Length Dimension 6.88976 IN Shipper (6) - Customary Width Dimension 6.88976 IN Shipper (6) - Metric Weight 1.1204 KG Shipper (6) - Metric Net Weight 0.95 KG Shipper (6) - Metric Cubic Dimension 3430.0 CCM Shipper (6) - Metric Height Dimension 11.2 CM Shipper (6) - Metric Length Dimension 17.5 CM Shipper (6) - Metric Width Dimension 17.5 CM Shipper (6) - Previous Packaging Level Quantity 20.00 Shipper (6) - Previous Packaging Level Unit WHLS Shipper (6) - Item Quantity 20 Shipper (6) - Total Unit Quantity 20.00 Shipper (6) - Item Unit WHLS Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 101177.76286 IN3 Pallet (8) - Customary Gross Weight 1069.425 LB Pallet (8) - Customary Net Weight 879.795 LB Pallet (8) - Customary Height Dimension 50 IN Pallet (8) - Customary Length Dimension 48.0315 IN Pallet (8) - Customary Width Dimension 42.12598 IN Pallet (8) - Metric Weight 485.0 KG Pallet (8) - Metric Net Weight 399.0 KG Pallet (8) - Metric Cubic Dimension 1658000.0 CCM Pallet (8) - Metric Height Dimension 127.0 CM Pallet (8) - Metric Length Dimension 122.0 CM Pallet (8) - Metric Width Dimension 107.0 CM Pallet (8) - Previous Packaging Level Quantity 420.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 8400 Pallet (8) - Total Unit Quantity 8400.00 Pallet (8) - Item Unit WHLS Pallet (8) - Unit PAL Pallet (8) - Pallet Layer Quantity 10.00 Pallet (8) - Shipping Container Per Layer Quantity 42