Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, 07485, SC-DR, A/O Coarse, TR, 3 in, with Scrim, 4 ea/Case
Main PictureDownload

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, 07485, SC-DR, A/O Coarse, TR, 3 in, with Scrim, 4 ea/Case

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, 07485, SC-DR, A/O Coarse, TR, 3 in, with Scrim, 4 ea/Case

  • 3M ID7000046114
    SAP ID7000046114
    Legacy SKU61500141918
    Part Number07485
    Product NumberSC-DR
    Local Catalog Identifier7485
    Base SKUB40064719
    Keywords
    • 3M, Scotch-Brite, Roloc, surface conditioning disc, quick change attachment, non-woven fiber, aluminum oxide, silicon carbide, blending, deburring, finishing, grinding, polishing, radiusing, refining, surface preparation, metalworking, woodworking, abrasives, industrial abrasives, metal fabrication, equipment maintenance, facility maintenance, automotive, collision repair, marine, oil and gas, rail transportation, personal recreation vehicles, commercial vehicles, construction, manufacturing, easy attachment, high cut-rate, low heat retention, durable abrasive, load resistant, consistent finishing, undercutting, gouging, irregular surfaces, contoured surfaces.
    • 3m die grinder roloc disc inch sanding grinding discs bits attachments standard abrasives quick change bristle scotch brite wheel abrasive wheels shank drill air angle roll lock bit power clean strip surface conditioning attachment disc pads disks SiC AO SC nonwoven multipurpose general purpose
    BrandScotch-Brite™
    Global Product HierarchyQuick Change Discs
    Commodity1150 - Surface Conditioning Prod
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00051131074859
    Consumer (2) - Article Number00051131074859
    Shipper (6) - Article Number50051131074854
  • Marketplace Formal NameScotch-Brite™ Roloc™ SC Surface Conditioning Disc, 07485, SC-DR, A/O Coarse, TR, 3 in, with Scrim, 4 ea/Case
    Material Description07485 SC-DR A CRS 3in TR SCRM 25/4 DC
    Marketplace DescriptionScotch-Brite™ Roloc™ SC Surface Conditioning Discs combine durable, nonwoven disc with the efficiency of the 3M™ Roloc™ quick-change attachment system for an effective disc that cleans, finishes, blends, and deburrs. The nonwoven fiber construction conforms well to help preserve irregular or contoured surfaces and the Roloc™ backing supports the disc for aggressive cutting.
    Marketplace Description ExtendedThe open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. Our 3M™ Roloc™ attachment system offers quick and easy disc change-out, making the Roloc™ SC Surface Conditioning Disc ideal for a range of tasks including blending, deburring, and finishing. We use aluminum oxide abrasive in Scotch-Brite™ Roloc™ SC Surface Conditioning Discs. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. We developed Scotch-Brite™ surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc. 3M™ Roloc™ TR quick change discs are smaller discs that have a plastic threaded button or screw designed to easily and quickly screw onto a Roloc™ TR disc pad (sold separately) so that you can conveniently change discs with a simple twist-off, twist-on motion. The Roloc TR system provides a secure attachment even for heavy-duty applications, and the variety of available 3M™ Roloc™ discs allows swapping from one application to the next in seconds.
    Bullets
    • AVAILABLE IN A RANGE OF GRADES: Choose from Super Fine (SFN), Very Fine (VFN), Medium (MED), and Coarse (CRS) to fit your application needs
    • CHOOSE YOUR MINERAL: Discs are available either powered by super-sharp silicon carbide (SiC) that excels in low-pressure and fine finishing applications or made from harder and more durable aluminum oxide (A/O)
    • CONFORMABLE NONWOVEN WEB: Springy nonwoven fibers resist loading, conform to irregular or contoured surfaces, and minimize undercutting and gouging
    • GREAT FOR LOW-TO-MEDIUM PRESSURE: Built for consistency in blending, cleaning, deburring, finishing, grinding, polishing, radiusing, refining, and surface preparation, depending on the chosen grade
    • QUICK AND EASY ATTACHMENT: Convenient 3M™ Roloc™ Attachment System allows for fast disc changes
    • WORKS ON A RANGE OF METALS: This multipurpose option is great for use on aluminum, mild steel, nickel alloy, stainless steel, and titanium
  • Abrasive MaterialAluminum Oxide
    Application
    • Cleaning
    • Blending
    • Refining
    • Deburring
  • Attachment TypeTR
    Backing MaterialNon-woven
    Backing WeightNon Pertinent
  • Center Hole Thread SizeNon Pertinent
  • GradeCoarse
    GritNon Pertinent
  • Maximum Speed18000 rpm
  • Micron GradeNon Pertinent
  • Overall Diameter (Imperial)3 in
    Overall Diameter (Metric)76.2 mm
  • Product ColorBrown
    Product FormDisc
  • Sub Applications
    • Light Deburring
    • Sanding
    • General Purpose Sanding
    • Intermediate Sanding
    • Blending
    • Finishing
    • Light Grinding
    • Refining
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    Substrate
    • Nickel Alloy
    • Stainless Steel
    • Aluminum
    • Titanium
    • Mild Steel
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr6805301000
    Return Policy DescriptionNo Return
    Sales unitKAR
    SAP Shelf Life In Days1825
    Target Warehouse Location Lead Time2 days
    SAP External Material Group31191500
  • Base (B) - Billing UnitKAR
    Base (B) - Customary Cubic Dimension181.44071 IN3
    Base (B) - Customary Gross Weight0.85014 LB
    Base (B) - Customary Net Weight0.58433 LB
    Base (B) - Customary Height Dimension6 IN
    Base (B) - Customary Length Dimension5.5 IN
    Base (B) - Customary Width Dimension5.5 IN
    Base (B) - Metric Net Weight0.265 KG
    Base (B) - Metric Cubic Dimension2973.268935 CCM
    Base (B) - Metric Height Dimension15.24 CM
    Base (B) - Metric Length Dimension13.97 CM
    Base (B) - Metric Width Dimension13.97 CM
    Base (B) - Previous Packaging Level Quantity0.00
    Base (B) - Item Quantity1
    Base (B) - Total Unit Quantity0.00
    Base (B) - UnitKAR
    Base (B) - Pallet Layer Quantity6.00
    Base (B) - Shipping Container Per Layer Quantity12
  • Consumer (2) - Billing UnitKAR
    Consumer (2) - Customary Cubic Dimension181.44071 IN3
    Consumer (2) - Customary Gross Weight0.85014 LB
    Consumer (2) - Customary Net Weight0.58433 LB
    Consumer (2) - Customary Height Dimension6 IN
    Consumer (2) - Customary Length Dimension5.5 IN
    Consumer (2) - Customary Width Dimension5.5 IN
    Consumer (2) - Metric Weight0.385553 KG
    Consumer (2) - Metric Net Weight0.265 KG
    Consumer (2) - Metric Cubic Dimension2973.268935 CCM
    Consumer (2) - Metric Height Dimension15.24 CM
    Consumer (2) - Metric Length Dimension13.97 CM
    Consumer (2) - Metric Width Dimension13.97 CM
    Consumer (2) - Previous Packaging Level Quantity1.00
    Consumer (2) - Item Quantity1
    Consumer (2) - Total Unit Quantity1.00
    Consumer (2) - Item UnitCTNS
    Consumer (2) - UnitKAR
  • Inner (3) - Item Quantity0
  • Shipper (6) - Billing UnitKAR
    Shipper (6) - Customary Cubic Dimension946.15732 IN3
    Shipper (6) - Customary Gross Weight3.94475 LB
    Shipper (6) - Customary Net Weight2.3373 LB
    Shipper (6) - Customary Height Dimension6.69291 IN
    Shipper (6) - Customary Length Dimension11.88976 IN
    Shipper (6) - Customary Width Dimension11.88976 IN
    Shipper (6) - Metric Weight1.789 KG
    Shipper (6) - Metric Net Weight1.06 KG
    Shipper (6) - Metric Cubic Dimension15504.68 CCM
    Shipper (6) - Metric Height Dimension17.0 CM
    Shipper (6) - Metric Length Dimension30.2 CM
    Shipper (6) - Metric Width Dimension30.2 CM
    Shipper (6) - Previous Packaging Level Quantity4.00
    Shipper (6) - Previous Packaging Level UnitCTNS
    Shipper (6) - Item Quantity4
    Shipper (6) - Total Unit Quantity4.00
    Shipper (6) - Item UnitCTNS
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitKAR
    Pallet (8) - Customary Cubic Dimension91596.99762 IN3
    Pallet (8) - Customary Gross Weight315.315 LB
    Pallet (8) - Customary Net Weight168.2856 LB
    Pallet (8) - Customary Height Dimension45.27559 IN
    Pallet (8) - Customary Length Dimension48.0315 IN
    Pallet (8) - Customary Width Dimension42.12598 IN
    Pallet (8) - Metric Weight143.0 KG
    Pallet (8) - Metric Net Weight76.32 KG
    Pallet (8) - Metric Cubic Dimension1501000.0 CCM
    Pallet (8) - Metric Height Dimension115.0 CM
    Pallet (8) - Metric Length Dimension122.0 CM
    Pallet (8) - Metric Width Dimension107.0 CM
    Pallet (8) - Previous Packaging Level Quantity72.00
    Pallet (8) - Previous Packaging Level UnitBOX
    Pallet (8) - Item Quantity288
    Pallet (8) - Total Unit Quantity288.00
    Pallet (8) - Item UnitCTNS
    Pallet (8) - UnitPAL
    Pallet (8) - Pallet Layer Quantity6.00
    Pallet (8) - Shipping Container Per Layer Quantity12