Main Picture
Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Coarse, 10 in x 24 in x 5 in, 1 ea/Case
Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Coarse, 10 in x 24 in x 5 in, 1 ea/Case
3M ID 7000046152 SAP ID 7000046152 Legacy SKU 61500167947 Product Number MU-WL Base SKU B40071671 Keywords multi finishing wheel, surface conditioner, scotch brite wheel, 3m scotch brite wheel, abrasive Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011305486 Unit of Use (1) - Article Number 00048011305486 Shipper (6) - Article Number 50048011305481 Marketplace Formal Name Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Coarse, 10 in x 24 in x 5 in, 1 ea/Case Material Description MU-WL 2S CRS 10 x 24 x 5in 1 ea WL Marketplace Description Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed. Marketplace Description Extended Our Scotch-Brite™ Multi-Finishing Wheel is ideal for producing #3 or #4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The Multi-Finishing Wheel runs cool and resists loading due to its open-web construction, reducing the risk of part discoloration and warping while extending the life of the wheel. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive. Our Scotch-Brite™ Multi-Finishing Wheel uses silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - CENTER HOLE ATTACHMENT: Utilize flanging or adaptors to adjust the center hole to a smaller size that fit your needs
- CHOOSE YOUR GRADE: Available in 2S Fine, 2S Medium, 2S Coarse, 3S Fine, 3S Medium, 3S Coarse, 4S Medium, and 4S Coarse
- CONFORMABLE NONWOVEN WEB: Scotch-Brite™ nonwoven synthetic fiber and abrasive mineral forms a web that is open, tough, conformable, and long-lasting
- FINISHING MADE EASY: Well suited for final finishing applications and producing uniform, appealing, and bright finishes on various metals
- MADE FOR METAL: Provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals
- RELIABLE RESULTS: Highly conformable construction enables the finishing of large areas to a uniform and appealing finish
- THE RIGHT MINERAL FOR THE JOB: This wheel utilizes silicon carbide, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as finishing and cleaning
Abrasive Material Silicon Carbide Application - Edge Deburring
- Surface Finishing
- Surface Preparation
- Refining
- Deburring
Attachment Type Center Hole Center Hole Diameter (Imperial) 5 in Center Hole Diameter (Metric) 127 mm Density 2 Face Width (Imperial) 24 in Face Width (Metric) 609.6 mm Grade Coarse Grit Non Pertinent Maximum Speed 3600 rpm Overall Diameter (Imperial) 10 in Overall Diameter (Metric) 254 mm Product Color Black Product Form Convolute Wheel Sub Applications Flat Finishing Substrate - Soft Metal
- Stainless Steel
- Aluminum
Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 20 SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 2936.47403 IN3 Base (B) - Customary Gross Weight 22.82175 LB Base (B) - Customary Net Weight 20.8152 LB Base (B) - Metric Net Weight 9.44 KG Base (B) - Metric Cubic Dimension 48120.0 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 2936.47403 IN3 Shipper (6) - Customary Gross Weight 22.82175 LB Shipper (6) - Customary Net Weight 20.8152 LB Shipper (6) - Customary Height Dimension 10.59055 IN Shipper (6) - Customary Length Dimension 26.1811 IN Shipper (6) - Customary Width Dimension 10.59055 IN Shipper (6) - Metric Weight 10.35 KG Shipper (6) - Metric Net Weight 9.44 KG Shipper (6) - Metric Cubic Dimension 48120.0 CCM Shipper (6) - Metric Height Dimension 26.9 CM Shipper (6) - Metric Length Dimension 66.5 CM Shipper (6) - Metric Width Dimension 26.9 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 93976.93293 IN3 Pallet (8) - Customary Gross Weight 597.555 LB Pallet (8) - Customary Net Weight 499.5648 LB Pallet (8) - Customary Height Dimension 47.24409 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 271.0 KG Pallet (8) - Metric Net Weight 226.56 KG Pallet (8) - Metric Cubic Dimension 1540000.0 CCM Pallet (8) - Metric Height Dimension 120.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 24 Pallet (8) - Unit PAL