Main Picture
Standard Abrasives™ Quick Change Surface Conditioning RC Disc, 840034, A/O Coarse, TSM, Brown, 3/4 in, QS75KM, 50/Car, 10 Car/Case
Standard Abrasives™ Quick Change Surface Conditioning RC Disc, 840034, A/O Coarse, TSM, Brown, 3/4 in, QS75KM, 50/Car, 10 Car/Case
3M ID 7000047096 SAP ID 7000047096 Legacy SKU 66000045071 Part Number 840034 Base SKU B40064760 Keywords Standard Abrasive, Metalworking, Non-woven disc, non woven disc, SC Disc Brand Standard Abrasives™ Global Product Hierarchy Quick Change Discs Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 30051115369071 Unit of Use (1) - Article Number 00051115369070 Inner (3) - Article Number 30051115369071 Shipper (6) - Article Number 50051115369075 Marketplace Formal Name Standard Abrasives™ Quick Change Surface Conditioning RC Disc, 840034, A/O Coarse, TSM, Brown, 3/4 in, QS75KM, 50/Car, 10 Car/Case Material Description SA 840034 ACRS 3/4inTSM QS75KM 50/500 DC Marketplace Description The Standard Abrasives™ Quick Change Surface Conditioning RC Disc saves time prepping workpieces for final finishes and coatings by cleaning and finishing in a single step. RC material breaks down with medium pressure to expose new fibers and mineral for effective cleaning, and is load-resistant to reduce clogging from paint and corrosion. Use it on flatwork, composites, and softer metals. Marketplace Description Extended RC Construction for Composites and Softer Metals Loading applications such as removing paint and corrosion require a product that breaks down easily to maintain a fresh cut. That's why our Standard Abrasives™ Quick Change Surface Conditioning RC Disc contains less resin than other surface conditioning products – it breaks down under medium pressure to produce a consistent cut-rate. Compared with our GP surface conditioning products, RC material offers a faster cut and increased durability for edgework. It is a great choice for general use, delivering a solid mix of durability, flexibility, and cut rate. Use this versatile disc for deburring, blending, cleaning and finishing on ferrous metals, as well as composites and softer metals. Featuring a more compact structure of non-woven fibers than Buff & Blend products, RC material (formerly BriteRite™) is constructed with a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the disc and allows for prolonged use on ferrous metals where final finishing is important. Recommended Applications Choose our Quick Change Surface Conditioning FE Disc for use on ferrous metals, softer metals such as aluminum, and composites for: • Deburring: removing large and micro burrs, edge radiusing, removing die cast flashings • Blending: removing mill marks, tool marks and mismatches, reducing uneven edges between adjoining surfaces, reorienting surface scratch patterns, creating a smooth transition from one surface profile to another • Cleaning: removing coatings, gaskets and surface discolorations from welds or other surfaces • Finishing: conditioning grind lines, reducing surface roughness, polishing welds prior to inspection, applying cosmetic grain finish The Outstanding Performance of Surface Conditioning Material Surface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, outstanding cut performance and extremely long service life. Aluminum Oxide for Ferrous Metals and Composites The fibers that make up this disc are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. RC discs feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of very fine, medium, coarse and extra coarse. Quick Change Discs Boost Productivity Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications. Easy fastening and swapping of discs enhances tool efficiency and worker productivity. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded male hub that easily threads onto TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS system has a metal hub that fastens to its holder pad with a simple twist. Standard Abrasives™ Quick Change FE Discs are available with TP, TR and TS attachments in disc diameters up to 4˝. Discs with 4-1/2˝ to 7˝ diameters have a TS 5/8-11 threaded hub that easily mounts to a TS 5/8-11 holder pad. We recommend using our discs together with a Standard Abrasives™ Quick Change Holder Pad to ensure optimal disc performance and to ensure that pressure is applied evenly all the way to the edge of the disc. Quality Standard Abrasives™ Solutions for Industrial Applications The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines. Bullets - Aluminum oxide on RC material provides good initial and extended cut rate
- Available in dark brown, extra coarse-grade; and blue, very fine grade; brown, coarse-grade; maroon, medium-grade
- Best material for general use and moderate pressure usage
- Designed for blending, coating removal, finishing, and light deburring on flat surfaces
- Easy fastening and swapping of quick change discs enhances tool efficiency and worker productivity
- Load-resistant material is well-suited for use on composites and soft metals such as aluminum
- Open web responds to surface irregularities and minimizes gouging of the part
Abrasive Material Aluminum Oxide Application - Surface Preparation
- Grinding
- Finishing
- Deburring
Attachment Type TSM Backing Weight Non Pertinent Center Hole Thread Size Non Pertinent Grade Coarse Grit Non Pertinent Micron Grade Non Pertinent Overall Diameter (Imperial) 0.75 in Overall Diameter (Metric) 19.05 mm Product Color Brown Product Form Disc Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 15 SAP External Material Group 31191500 Base (B) - Billing Unit KAR Base (B) - Customary Cubic Dimension 27.00012 IN3 Base (B) - Customary Gross Weight 0.20204 LB Base (B) - Customary Net Weight 0.14994 LB Base (B) - Customary Height Dimension 3 IN Base (B) - Customary Length Dimension 3 IN Base (B) - Customary Width Dimension 3 IN Base (B) - Metric Net Weight 0.068 KG Base (B) - Metric Cubic Dimension 442.451 CCM Base (B) - Metric Height Dimension 7.62 CM Base (B) - Metric Length Dimension 7.62 CM Base (B) - Metric Width Dimension 7.62 CM Base (B) - Item Quantity 1 Base (B) - Unit KAR Consumer (2) - Item Quantity 0 Inner (3) - Billing Unit KAR Inner (3) - Customary Cubic Dimension 27.00012 IN3 Inner (3) - Customary Gross Weight 0.20204 LB Inner (3) - Customary Net Weight 0.14994 LB Inner (3) - Customary Height Dimension 3 IN Inner (3) - Customary Length Dimension 3 IN Inner (3) - Customary Width Dimension 3 IN Inner (3) - Metric Weight 0.091626 KG Inner (3) - Metric Net Weight 0.068 KG Inner (3) - Metric Cubic Dimension 442.451 CCM Inner (3) - Metric Height Dimension 7.62 CM Inner (3) - Metric Length Dimension 7.62 CM Inner (3) - Metric Width Dimension 7.62 CM Inner (3) - Item Quantity 1 Inner (3) - Unit KAR Shipper (6) - Billing Unit KAR Shipper (6) - Customary Cubic Dimension 383.45396 IN3 Shipper (6) - Customary Gross Weight 2.37148 LB Shipper (6) - Customary Net Weight 1.4994 LB Shipper (6) - Customary Height Dimension 3.8189 IN Shipper (6) - Customary Length Dimension 15.55118 IN Shipper (6) - Customary Width Dimension 6.45669 IN Shipper (6) - Metric Weight 1.0755 KG Shipper (6) - Metric Net Weight 0.68 KG Shipper (6) - Metric Cubic Dimension 6283.66 CCM Shipper (6) - Metric Height Dimension 9.7 CM Shipper (6) - Metric Length Dimension 39.5 CM Shipper (6) - Metric Width Dimension 16.4 CM Shipper (6) - Item Quantity 10 Shipper (6) - Unit CS Pallet (8) - Billing Unit KAR Pallet (8) - Customary Cubic Dimension 94770.24471 IN3 Pallet (8) - Customary Gross Weight 531.405 LB Pallet (8) - Customary Net Weight 313.3746 LB Pallet (8) - Customary Height Dimension 46.85039 IN Pallet (8) - Customary Length Dimension 48.0315 IN Pallet (8) - Customary Width Dimension 42.12598 IN Pallet (8) - Metric Weight 241.0 KG Pallet (8) - Metric Net Weight 142.12 KG Pallet (8) - Metric Cubic Dimension 1553000.0 CCM Pallet (8) - Metric Height Dimension 119.0 CM Pallet (8) - Metric Length Dimension 122.0 CM Pallet (8) - Metric Width Dimension 107.0 CM Pallet (8) - Item Quantity 2090 Pallet (8) - Unit PAL