Main Picture
3M™ Performance Masking Tape 2380, Tan, 18 mm x 55 m, 7.2 mil, 48 Rolls/Case
3M™ Performance Masking Tape 2380, Tan, 18 mm x 55 m, 7.2 mil, 48 Rolls/Case
3M ID 7000088413 SAP ID 7000088413 Legacy SKU GT500015810 Part Number 2380 Product Number 2380 Local Catalog Identifier 2380 Base SKU B40067086 Keywords 3M, performance masking tape, industrial masking tape, high temperature resistance, paint masking, clean removal, adhesive bonds, automotive paint jobs, aerospace paint jobs, marine paint jobs, specialty vehicle paint jobs, custom paint applications, crepe paper tape, strong adhesion, tough backing, heat resistance, irregular surfaces, precise paint lines, sliver resistant, one-piece removal, paint processes, overspray protection, surface protection, temporary repairs, bundling, labeling, sealing, splicing, automotive aftermarket, general manufacturing, construction supplies, warehousing items, military applications, shipping industry, commercial vehicles, industrial applications, masking tape colors, 3m masking tape, painter's tape, tan masking tape, high performance masking Brand 3M™ Global Product Hierarchy Masking Tapes Commodity 2740 - Specialty Masking Systems Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 05010027794740 Unit of Use (1) - Article Number 05010027794740 Shipper (6) - Article Number 50021200445847 Marketplace Formal Name 3M™ Performance Masking Tape 2380, Tan, 18 mm x 55 m, 7.2 mil, 48 Rolls/Case Material Description 2380 18mmX55M 48/CV Marketplace Description 3M™ Performance Masking Tape 2380 was designed for industrial use where the best possible paint line is desired and drying conditions range from air dry to oven bake. Its smooth, strong, mini-crepe paper masking tape holds fast, removes easily and will give you great performance for most paint masking applications. Marketplace Description Extended Among Our Greatest Crepe Tapes This highly versatile tape has all the features that are desirable for a high performance masking tape, such as strong adhesion, tough backing, excellent heat resistance and easy removal. It remains in place around corners, contours, and irregular surfaces to provide sharp paint lines in paint applications. 3M™ Performance Masking Tape 2380 has been laboratory tested on painted steel panels and found to remove cleanly for up to 30 minutes at bake temperatures up to 325ºF/ 162ºC. The adhesive bonds instantly to paper, metal, wood, and painted surfaces with reliable holding power that resists lifting and curling, essential for producing precise paint lines. 3M™ Performance Masking Tape 2380 also features one-piece removal and is sliver resistant under normal operating conditions. Recommended Applications Industrial paint masking for specialty vehicle, automotive, rail, marine and aerospace paint jobs Paint masking for high temperature paint processes Paint masking for custom, two-tone and multiple color applications What is Masking Tape? Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application. A masking tape should specify what surfaces it will stick to and the interval over which it will remove cleanly. A very thin or poorly manufactured tape may demonstrate splintering or shredding, either coming off the roll or when being removed after use. Some masking tapes have the tensile strength for light commercial and industrial applications, including bundling, labeling, sealing, temporary repairs, lane marking, splicing, and surface protection. From wide to narrow, single rolls to bulk, there are many options to choose from when ordering masking tape. The classic crepe paper masking tape is a light tan color, but masking tapes from 3M come in a variety of colors and formulations to meet general and specific applications. From wide to narrow, single rolls to bulk, there are many options to choose from when ordering masking tape. A roll of masking tape is a basic toolbox or supply room item in construction, warehousing, military, marine, shipping, automotive aftermarket, and general manufacturing. Bullets - Adhesive bonds instantly to many surfaces, holding in place without lifting or curling
- Clean, one-piece removal at bake temperatures up to 325° F/162° C for 30 minutes
- Heavy crepe paper backing resists bleed-through
- Industrial masking tape that provides strong holding power and exceptional high-temperature resistance
- Resists slivering when exposed to high heat
Adhesive Type Natural Rubber/Synthetic Rubber Application Painting & Depainting Backing (Carrier) Material Crepe Paper Indoor/Outdoor Indoor Maximum Operating Temperature (Celsius) 163 °C Maximum Operating Temperature (Fahrenheit) 325 °F Overall Length (Imperial) 60.14 yd Overall Length (Metric) 55 m Overall Width (Imperial) 0.71 in Overall Width (Metric) 18 mm Product Color Tan Tensile Strength (Imperial) [Missing translation: 448] Tensile Strength (Metric) 49 N/100mm ECCN EAR99 Harmonized Tariff Schedule Nbr 4811412100 Return Policy Description 0-30d:0%;31-180:15%;>180:no return Sales unit ROL SAP Shelf Life In Days 547 Target Warehouse Location Lead Time 2 days SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 26.39922 IN3 Base (B) - Customary Gross Weight 0.38413 LB Base (B) - Customary Net Weight 0.36824 LB Base (B) - Metric Net Weight 0.167 KG Base (B) - Metric Cubic Dimension 432.604 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Billing Unit ROL Inner (3) - Customary Cubic Dimension 222.76195 IN3 Inner (3) - Customary Gross Weight 4.46513 LB Inner (3) - Customary Net Weight 4.41882 LB Inner (3) - Customary Height Dimension 8.50394 IN Inner (3) - Customary Length Dimension 5.11811 IN Inner (3) - Customary Width Dimension 5.11811 IN Inner (3) - Metric Weight 2.025 KG Inner (3) - Metric Net Weight 2.004 KG Inner (3) - Metric Cubic Dimension 3650.4 CCM Inner (3) - Metric Height Dimension 21.6 CM Inner (3) - Metric Length Dimension 13.0 CM Inner (3) - Metric Width Dimension 13.0 CM Inner (3) - Item Quantity 12 Inner (3) - Unit PAK Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 1267.16251 IN3 Shipper (6) - Customary Gross Weight 18.43821 LB Shipper (6) - Customary Net Weight 17.67528 LB Shipper (6) - Customary Height Dimension 9.33071 IN Shipper (6) - Customary Length Dimension 11.65354 IN Shipper (6) - Customary Width Dimension 11.65354 IN Shipper (6) - Metric Weight 8.362 KG Shipper (6) - Metric Net Weight 8.016 KG Shipper (6) - Metric Cubic Dimension 20764.992 CCM Shipper (6) - Metric Height Dimension 23.7 CM Shipper (6) - Metric Length Dimension 29.6 CM Shipper (6) - Metric Width Dimension 29.6 CM Shipper (6) - Item Quantity 48 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 68047.8428 IN3 Pallet (8) - Customary Gross Weight 943.74 LB Pallet (8) - Customary Net Weight 848.41344 LB Pallet (8) - Customary Height Dimension 41.33858 IN Pallet (8) - Customary Length Dimension 35.43307 IN Pallet (8) - Customary Width Dimension 46.45669 IN Pallet (8) - Metric Weight 428.0 KG Pallet (8) - Metric Net Weight 384.768 KG Pallet (8) - Metric Cubic Dimension 1115100.0 CCM Pallet (8) - Metric Height Dimension 105.0 CM Pallet (8) - Metric Length Dimension 90.0 CM Pallet (8) - Metric Width Dimension 118.0 CM Pallet (8) - Item Quantity 2304 Pallet (8) - Unit PAL