Main Picture
3M™ Channel Bonding and Sidelite Adhesive 08641, 47.3 mL Cartridge 6/Case
3M™ Channel Bonding and Sidelite Adhesive 08641, 47.3 mL Cartridge 6/Case
3M ID 7000119888 SAP ID 7000119888 Legacy SKU 60455052443 Part Number 08641 Local Catalog Identifier 08641 Base SKU B40066536 Keywords Cavity Wax, OEM Match, Body Coating, Urethane Seam Sealer, Plastic Repair, Structural Adhesive, Panel Bonding, Windscreen Bonding, Rocker Gard, no cleanup, Brand 3M™ Global Product Hierarchy Two Part Structural Adhesives Commodity 2820 - FACS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051135086414 Consumer (2) - Article Number 00051135086414 Shipper (6) - Article Number 50051135086419 Marketplace Formal Name 3M™ Channel Bonding and Sidelite Adhesive 08641, 47.3 mL Cartridge 6/Case Material Description 08641,CHANNEL BOND & SIDELITE ADH,47.3ML Marketplace Description 3M™ Channel Bonding and Sidelite Adhesive securely bonds glass in both stationary and movable applications on automobiles. This high-performance, two-component black epoxy adhesive is both flexible and durable when bonding impervious surfaces such as glass to metal or plastic. This adhesive is black in color. Marketplace Description Extended 3M™ Channel Bonding and Sidelite Adhesive creates a secure bond between glass and other impervious materials such as metal or plastic. Our two-part, black epoxy adhesive is rated for bonding both movable and stationary glass into place. This rapidly curing adhesive has a work time of 5 minutes, a clamp time of 1 hour and a cure time of 24 hours under typical environmental conditions. The quick-curing properties of this adhesive is a benefit compared to the hours or even days it often takes for one-part sealers and adhesives. The black color of the adhesive maintains the desired O.E.M. appearance. Apply this adhesive with a 3M™ Performance Manual Applicator (part number 08190) and 3M™ Static Mixing Nozzle (part number 38191). This comprehensive mixing and application system provides precise placement of adhesive with no waste and more time savings. PRECAUTIONARY INFORMATION: Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC’s) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area. Typical Performance Properties: The following times have been determined with ambient air temperature and substrate temperature @ 70°F (21°C) and are considered typical values. • WORK TIME: 5 minutes • MIX NOZZLE DWELL TIME: 3.5 minutes • HANDLING/CLAMP TIME: 1 hour • CURE TIME: 24 hours Directions for Use: Preparation: Clean the side glass channel of dirt, oil, grease and moisture dry thoroughly. When bonding to a metal channel, first remove all rust. For optimum adhesion and corrosion resistance, prime all metal surfaces prior to applying seam sealer(s). If an acid-etch (self-etching) primer is used, a 2K epoxy or urethane primer must be applied before the application of the adhesive. Unmixed material may be cleaned from most surfaces with an appropriate VOC compliant product. • Clean the window glass of all dirt, oil grease and moisture using glass cleaner. Dry thoroughly. • If repairing a movable glass position the glass properly in the glass run channel and tape in place in the up position. If stationary glass prepare the pinch weld area as necessary, (be sure to pre-fit all parts prior to applying the adhesive). • Insert the cartridge into the applicator gun, remove the cap from the cartridge and dispense a small amount of adhesive until both parts A and B dispense equally. • Attach the mixing nozzle and dispense a small amount of adhesive through the mixing nozzle. • Apply the adhesive to one of the parts and assemble the parts within 3 minutes. • If bonding a movable glass leave the glass in the up position for 24 hours before using. If bonding a stationary glass fixture in place for 1 hour before using. CLEAN‑UP: Unmixed material may be cleaned from most surfaces with an appropriate VOC compliant product. Bullets - Black color maintains O.E.M. appearance
- Epoxy for bonding glass to metal or plastic on vehicles
- Rapidly curing epoxy gets a car ready for the road sooner
- Recommended for either stationary or movable glass applications
Adhesive Type Epoxy Application Bonding Consistency Paste Container Size (Imperial) 1.6 fl oz Container Size (Metric) 47.3 ml Container Type Cartridge Volume (Imperial) 1.6 fl oz Volume (Metric) 47.3 mL Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 545 Target Warehouse Location Lead Time 2 days SAP External Material Group 12000000 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 51.8402 IN3 Base (B) - Customary Gross Weight 0.18003 LB Base (B) - Customary Net Weight 0.11999 LB Base (B) - Customary Height Dimension 8.5 IN Base (B) - Customary Length Dimension 1 IN Base (B) - Customary Width Dimension 6.09843 IN Base (B) - Metric Net Weight 0.054417 KG Base (B) - Metric Cubic Dimension 849.50541 CCM Base (B) - Metric Height Dimension 21.59 CM Base (B) - Metric Length Dimension 2.54 CM Base (B) - Metric Width Dimension 15.49 CM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Billing Unit EA Consumer (2) - Customary Cubic Dimension 51.8402 IN3 Consumer (2) - Customary Gross Weight 0.18003 LB Consumer (2) - Customary Net Weight 0.11999 LB Consumer (2) - Customary Height Dimension 8.5 IN Consumer (2) - Customary Length Dimension 1 IN Consumer (2) - Customary Width Dimension 6.09843 IN Consumer (2) - Metric Weight 0.081647 KG Consumer (2) - Metric Net Weight 0.054417 KG Consumer (2) - Metric Cubic Dimension 849.50541 CCM Consumer (2) - Metric Height Dimension 21.59 CM Consumer (2) - Metric Length Dimension 2.54 CM Consumer (2) - Metric Width Dimension 15.49 CM Consumer (2) - Item Quantity 1 Consumer (2) - Unit EA Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 309.27552 IN3 Shipper (6) - Customary Gross Weight 1.32013 LB Shipper (6) - Customary Net Weight 0.71994 LB Shipper (6) - Customary Height Dimension 5.23622 IN Shipper (6) - Customary Length Dimension 8.62205 IN Shipper (6) - Customary Width Dimension 6.85039 IN Shipper (6) - Metric Weight 0.5987 KG Shipper (6) - Metric Net Weight 0.326502 KG Shipper (6) - Metric Cubic Dimension 5068.098 CCM Shipper (6) - Metric Height Dimension 13.3 CM Shipper (6) - Metric Length Dimension 21.9 CM Shipper (6) - Metric Width Dimension 17.4 CM Shipper (6) - Item Quantity 6 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 93122.59718 IN3 Pallet (8) - Customary Gross Weight 346.185 LB Pallet (8) - Customary Net Weight 172.7838 LB Pallet (8) - Customary Height Dimension 46.85039 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 157.0 KG Pallet (8) - Metric Net Weight 78.36 KG Pallet (8) - Metric Cubic Dimension 1526000.0 CCM Pallet (8) - Metric Height Dimension 119.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 1440 Pallet (8) - Unit PAL