Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 2 in, 50/Carton, 200 ea/Case
Main PictureDownload

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 2 in, 50/Carton, 200 ea/Case

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 2 in, 50/Carton, 200 ea/Case

  • 3M ID7000120667
    SAP ID7000120667
    Legacy SKU61500052503
    Product NumberSC-DS
    Base SKUB40064719
    Keywords3M, Scotch-Brite, Roloc, surface conditioning disc, quick change attachment, non-woven fiber, aluminum oxide, silicon carbide, blending, deburring, finishing, grinding, polishing, radiusing, refining, surface preparation, metalworking, woodworking, abrasives, industrial abrasives, metal fabrication, equipment maintenance, facility maintenance, automotive, collision repair, marine, oil and gas, rail transportation, personal recreation vehicles, commercial vehicles, construction, manufacturing, easy attachment, high cut-rate, low heat retention, durable abrasive, load resistant, consistent finishing, undercutting, gouging, irregular surfaces, contoured surfaces.
    BrandScotch-Brite™
    Global Product HierarchyQuick Change Discs
    Commodity1150 - Surface Conditioning Prod
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00048011132549
    Unit of Use (1) - Article Number00048011132549
    Inner (3) - Article Number30048011132540
    Shipper (6) - Article Number50048011132544
  • Marketplace Formal NameScotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 2 in, 50/Carton, 200 ea/Case
    Material DescriptionSC-DS A MED 2in TS 50/200 DC
    Marketplace DescriptionScotch-Brite™ Roloc™ SC Surface Conditioning Discs combine durable, nonwoven disc with the efficiency of the 3M™ Roloc™ quick-change attachment system for an effective disc that cleans, finishes, blends, and deburrs. The nonwoven fiber construction conforms well to help preserve irregular or contoured surfaces and the Roloc™ backing supports the disc for aggressive cutting.
    Marketplace Description ExtendedThe open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. Our 3M™ Roloc™ attachment system offers quick and easy disc change-out, making the Roloc™ SC Surface Conditioning Disc ideal for a range of tasks including blending, deburring, and finishing. We use aluminum oxide abrasive in Scotch-Brite™ Roloc™ SC Surface Conditioning Discs. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. We developed Scotch-Brite™ surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc. 3M™ Roloc™ TR quick change discs are smaller discs that have a plastic threaded button or screw designed to easily and quickly screw onto a Roloc™ TR disc pad (sold separately) so that you can conveniently change discs with a simple twist-off, twist-on motion. The Roloc TR system provides a secure attachment even for heavy-duty applications, and the variety of available 3M™ Roloc™ discs allows swapping from one application to the next in seconds.
    Bullets
    • AVAILABLE IN A RANGE OF GRADES: Choose from Super Fine (SFN), Very Fine (VFN), Medium (MED), and Coarse (CRS) to fit your application needs
    • CHOOSE YOUR MINERAL: Discs are available either powered by super-sharp silicon carbide (SiC) that excels in low-pressure and fine finishing applications or made from harder and more durable aluminum oxide (A/O)
    • CONFORMABLE NONWOVEN WEB: Springy nonwoven fibers resist loading, conform to irregular or contoured surfaces, and minimize undercutting and gouging
    • GREAT FOR LOW-TO-MEDIUM PRESSURE: Built for consistency in blending, cleaning, deburring, finishing, grinding, polishing, radiusing, refining, and surface preparation, depending on the chosen grade
    • QUICK AND EASY ATTACHMENT: Convenient 3M™ Roloc™ Attachment System allows for fast disc changes
    • WORKS ON A RANGE OF METALS: This multipurpose option is great for use on aluminum, mild steel, nickel alloy, stainless steel, and titanium
  • Abrasive MaterialAluminum Oxide
    Application
    • Cleaning
    • Blending
    • Finishing
    • Radiusing
    • Refining
    • Deburring
  • Attachment TypeTS
    Backing MaterialNon-woven
    Backing WeightNon Pertinent
  • Center Hole Thread SizeNon Pertinent
  • GradeMedium
    GritNon Pertinent
  • Maximum Speed25000 rpm
  • Micron GradeNon Pertinent
  • Overall Diameter (Imperial)2 in
    Overall Diameter (Metric)50.8 mm
  • Product ColorMaroon
    Product FormDisc
  • Sub Applications
    • Light Deburring
    • General Purpose Sanding
    • Intermediate Sanding
    • Blending
    • Finishing
    • Refining
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    Substrate
    • Nickel Alloy
    • Stainless Steel
    • Aluminum
    • Titanium
    • Mild Steel
  • Return Policy Description0-6: 0%; 6-12: 15%; >12: no return
    Sales unitEA
    SAP Shelf Life In Days1825
    Target Warehouse Location Lead Time2 days
    SAP External Material Group31191500
  • Base (B) - Billing UnitEA
    Base (B) - Customary Cubic Dimension1.40001 IN3
    Base (B) - Customary Gross Weight0.01 LB
    Base (B) - Customary Net Weight0.00992 LB
    Base (B) - Customary Height Dimension0.35 IN
    Base (B) - Customary Length Dimension2 IN
    Base (B) - Customary Width Dimension2 IN
    Base (B) - Metric Net Weight0.0045 KG
    Base (B) - Metric Cubic Dimension22.94189 CCM
    Base (B) - Metric Height Dimension0.889 CM
    Base (B) - Metric Length Dimension5.08 CM
    Base (B) - Metric Width Dimension5.08 CM
    Base (B) - Item Quantity1
    Base (B) - UnitEA
  • Consumer (2) - Item Quantity0
  • Inner (3) - Billing UnitEA
    Inner (3) - Customary Cubic Dimension125.00049 IN3
    Inner (3) - Customary Gross Weight0.64011 LB
    Inner (3) - Customary Net Weight0.49613 LB
    Inner (3) - Customary Height Dimension5 IN
    Inner (3) - Customary Length Dimension5 IN
    Inner (3) - Customary Width Dimension5 IN
    Inner (3) - Metric Weight0.2903 KG
    Inner (3) - Metric Net Weight0.225 KG
    Inner (3) - Metric Cubic Dimension2048.383 CCM
    Inner (3) - Metric Height Dimension12.7 CM
    Inner (3) - Metric Length Dimension12.7 CM
    Inner (3) - Metric Width Dimension12.7 CM
    Inner (3) - Item Quantity50
    Inner (3) - UnitKAR
  • Shipper (6) - Billing UnitEA
    Shipper (6) - Customary Cubic Dimension641.10136 IN3
    Shipper (6) - Customary Gross Weight3.02085 LB
    Shipper (6) - Customary Net Weight1.9845 LB
    Shipper (6) - Customary Height Dimension5.59055 IN
    Shipper (6) - Customary Length Dimension10.70866 IN
    Shipper (6) - Customary Width Dimension10.70866 IN
    Shipper (6) - Metric Weight1.37 KG
    Shipper (6) - Metric Net Weight0.9 KG
    Shipper (6) - Metric Cubic Dimension10505.728 CCM
    Shipper (6) - Metric Height Dimension14.2 CM
    Shipper (6) - Metric Length Dimension27.2 CM
    Shipper (6) - Metric Width Dimension27.2 CM
    Shipper (6) - Item Quantity200
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitEA
    Pallet (8) - Customary Cubic Dimension89217.06231 IN3
    Pallet (8) - Customary Gross Weight284.445 LB
    Pallet (8) - Customary Net Weight166.698 LB
    Pallet (8) - Customary Height Dimension44.09449 IN
    Pallet (8) - Customary Length Dimension48.0315 IN
    Pallet (8) - Customary Width Dimension42.12598 IN
    Pallet (8) - Metric Weight129.0 KG
    Pallet (8) - Metric Net Weight75.6 KG
    Pallet (8) - Metric Cubic Dimension1462000.0 CCM
    Pallet (8) - Metric Height Dimension112.0 CM
    Pallet (8) - Metric Length Dimension122.0 CM
    Pallet (8) - Metric Width Dimension107.0 CM
    Pallet (8) - Item Quantity16800
    Pallet (8) - UnitPAL