Main Picture
Scotch-Brite™ Clean and Strip Disc D2, 4 in x 1 in x 1/4 in S XCS, 10 ea/Case
Scotch-Brite™ Clean and Strip Disc D2, 4 in x 1 in x 1/4 in S XCS, 10 ea/Case
3M ID 7000120711 SAP ID 7000120711 Legacy SKU 61500070687 Base SKU B40065040 Keywords non woven disc, surface disc, grinding disc Brand Scotch-Brite™ Global Product Hierarchy Non-woven Discs Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011147802 Unit of Use (1) - Article Number 00048011147802 Shipper (6) - Article Number 50048011147807 Marketplace Formal Name Scotch-Brite™ Clean and Strip Disc D2, 4 in x 1 in x 1/4 in S XCS, 10 ea/Case Material Description C2-ZS CSD2-S S XCS 4X1X1/4 10/CS Marketplace Description Scotch-Brite™ Clean and Strip Disc D2 aggressively cleans welds and removes paint, rust, and coatings without profiling or gouging the metal beneath. Extra coarse silicon carbide non-woven disc cuts fast, conforms to contours and leaves a fine finish. Marketplace Description Extended Take Off the Paint, Rust and Corrosion, Not the Metal: Our aggressive, non-woven Scotch-Brite™ Clean and Strip Disc D2 is an extremely durable open web of fiber, resin and silicon carbide. Two discs mounted on a common 1/4-inch shaft to fit portable tools provide greater rigidity for maintenance and cleaning tasks. The greater edge surface is conformable, allowing it to clean welds, remove rust and strip paint in hard to get at creases and dents without removing metal. Abrasive grains are bonded to and uniformly dispersed throughout a web of flexible nylon fiber. The “open weave” construction provides a continuous, fresh supply of cutting grain as fibers wear away during use, providing a consistent finish. Gaps in the web allow swarf to escape, so debris does not clog the mineral. The flexible “spring-like” design conforms to contours and corners and so reduces the risk of undercutting or gouging the work piece. The open web construction and aggressive abrasive properties provide a smooth running wheel that resists loading when removing soft coatings. Silicon Carbide for Sharp Cut: We chose silicon carbide abrasive, which is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Scotch-Brite™ Abrasives Deliver the Quality You Need: Our Scotch-Brite™ industrial abrasives are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Originally developed by 3M scientists in the 1930s to make decorative ribbon, in the 50s 3M found a way to "marry" the fibrous open web with abrasive grain. The spring-like nature of the resulting nonwoven abrasive is more responsive to contours and removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece. Especially effective for surface conditioning, the result is product ready to finish. Subsequent steps may be unnecessary. Rework is reduced, productivity goes up. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part. Bullets - Durable non-woven web resists loading and heat so runs longer, delivers consistent results
- Extra coarse grade silicon carbide cuts fast and leaves a finer finish than wire brushes
- Removes paint, rust and coatings quickly without profiling or gouging the metal
- Safer than wire brushes which can break and be propelled
- Spring-like action produces a smooth, burr-free surface
- Two discs supply greater rigidity and more usable edge surface than single disc
Abrasive Material Silicon Carbide Application Surface Preparation Attachment Type Hook & Loop Backing Material Non-woven Center Hole Diameter (Imperial) 0.25 in Center Hole Diameter (Metric) 6.35 mm Center Hole Thread Size Non Pertinent Density 0.0 Disc Type Non Pertinent Grade Extra Coarse Grit Non Pertinent Maximum Speed 6000 rpm Overall Diameter (Imperial) 4 in Overall Diameter (Metric) 101.6 mm Product Color Black Product Form Disc Sub Applications - Paint Removal
- Sealant Removal
- Paint Stripping
- Coating Removal
- Rust Removal
Substrate All Metal ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 2 days SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 4.00002 IN3 Base (B) - Customary Gross Weight 0.15233 LB Base (B) - Customary Net Weight 0.15232 LB Base (B) - Customary Height Dimension 4 IN Base (B) - Customary Length Dimension 0.25 IN Base (B) - Customary Width Dimension 4 IN Base (B) - Metric Net Weight 0.06908 KG Base (B) - Metric Cubic Dimension 65.548256 CCM Base (B) - Metric Height Dimension 10.16 CM Base (B) - Metric Length Dimension 0.635 CM Base (B) - Metric Width Dimension 10.16 CM Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit EA Base (B) - Pallet Layer Quantity 8.00 Base (B) - Shipping Container Per Layer Quantity 25 Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 355.23281 IN3 Shipper (6) - Customary Gross Weight 2.90046 LB Shipper (6) - Customary Net Weight 1.52321 LB Shipper (6) - Customary Height Dimension 5.19685 IN Shipper (6) - Customary Length Dimension 8.26772 IN Shipper (6) - Customary Width Dimension 8.26772 IN Shipper (6) - Metric Weight 1.3154 KG Shipper (6) - Metric Net Weight 0.6908 KG Shipper (6) - Metric Cubic Dimension 5821.2 CCM Shipper (6) - Metric Height Dimension 13.2 CM Shipper (6) - Metric Length Dimension 21.0 CM Shipper (6) - Metric Width Dimension 21.0 CM Shipper (6) - Previous Packaging Level Quantity 10.00 Shipper (6) - Previous Packaging Level Unit DISC Shipper (6) - Item Quantity 10 Shipper (6) - Total Unit Quantity 10.00 Shipper (6) - Item Unit DISC Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 92329.28541 IN3 Pallet (8) - Customary Gross Weight 608.58 LB Pallet (8) - Customary Net Weight 304.6428 LB Pallet (8) - Customary Height Dimension 46.45669 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 276.0 KG Pallet (8) - Metric Net Weight 138.16 KG Pallet (8) - Metric Cubic Dimension 1513000.0 CCM Pallet (8) - Metric Height Dimension 118.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Previous Packaging Level Quantity 200.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 2000 Pallet (8) - Total Unit Quantity 2000.00 Pallet (8) - Item Unit DISC Pallet (8) - Unit PAL Pallet (8) - Pallet Layer Quantity 8.00 Pallet (8) - Shipping Container Per Layer Quantity 25