Main Picture
Scotch-Brite™ Surface Conditioning Scrim Backed Belt, SC-BS, A/O Medium, 3/4 in x 20-1/2 in, 20 ea/Case
Scotch-Brite™ Surface Conditioning Scrim Backed Belt, SC-BS, A/O Medium, 3/4 in x 20-1/2 in, 20 ea/Case
3M ID 7000120754 SAP ID 7000120754 Legacy SKU 61500083839 Product Number SC-BS Base SKU B40071840 Keywords 3M, Scotch-Brite, Surface Conditioning Belt, durable belt, blending, cleaning, contour finishing, deburring, fine finishing, flat finishing, stainless steel finishing, straightline-brushed finishes, metals, nonwoven belts, reduced loading, heat build-up, extended operating time, consistent surface conditioning, conformability, complex-shaped parts, robotic processing, reinforced backing, nonwoven open web, flexibility, surface imperfections, grind lines, mill marks, versatile abrasive, coarse grind lines, small burrs, cutting tools, conventional abrasives, abrasive belts, sanding tools, wood, metal, robotic finishing, high consistency, long-lasting abrasives, industrial abrasives, spec-required finish, manual processing, industrial belt sander, wide belt sanders, large wood panels, edge belt sanders, portable belt sanders, cabinet doors, file tools, metalworking, small areas, inside corners, aluminum oxide, silicon carbide, abrasive mineral, Brand Scotch-Brite™ Global Product Hierarchy Non-woven Belts Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011158976 Unit of Use (1) - Article Number 00048011158976 Shipper (6) - Article Number 50048011158971 Marketplace Formal Name Scotch-Brite™ Surface Conditioning Scrim Backed Belt, SC-BS, A/O Medium, 3/4 in x 20-1/2 in, 20 ea/Case Material Description SC-BS A MED 3/4 x 20-1/2in 20 BLT Marketplace Description Scotch-Brite™ SC Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals. Marketplace Description Extended A Versatile Abrasive: Scotch-Brite™ SC Surface Conditioning Belt work well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. Ideal for Robotic Finishing: With a wide range of conformability options and high consistency, long-lasting Scotch-Brite™ industrial abrasives are a great option for robotic metal finishing. Scotch-Brite™ SC Surface Conditioning Belts can generate a spec-required, aesthetic finish when used in both manual and robotic processing. Choose the Right Belt for You: At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wide belt sanders are used for sanding and finishing large wood panels. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors, and narrow belts are used with file tools in metalworking to access small areas or inside corners. Hard-Working Minerals: Aluminum Oxide and Silicon Carbide: We manufacture Scotch-Brite™ SC Surface Conditioning Belts with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. An Alternative for Wheels and Discs: Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel. Bullets - ENHANCED CONFORMABILITY: Allows abrasive to stay in contact with complex-shaped parts in robotic processing
- EXTENDED OPERATING TIME: Reduced loading and heat build-up allow for longer use and consistent surface conditioning results
- IMPERFECTION REMOVAL: Eliminates surface imperfections, grind lines, mill marks, and other blemishes
- SUPERIOR FLEXIBILITY: Reinforced backing and nonwoven open web material offer excellent adaptability for detail work over contours and edges
- VERSATILE APPLICATIONS: Nonwoven surface conditioning belts are used for cleaning, blending, deburring, and finishing
Abrasive Material Aluminum Oxide Application - Cleaning
- Surface Preparation
- Grinding
- Finishing
- Deburring
Attachment Type Non Pertinent Backing Material Scrim Bond Type Resin Flexibility Semi-flexible Grade Medium Low Stretch No Maximum Speed 6500 ft/min Overall Length (Imperial) 20.5 in Overall Length (Metric) 520.7 mm Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Maroon Product Form Belt Sub Applications - Weld Removal & Finishing
- Edge Beveling
- Flat Areas
- Blending
- Straightline - Brushed Finish
- Stainless Steel Finishing
- Fine Finishing
- Setting the Grain
- Contour Finishing
- Blending Corners
- Flat Finishing
Substrate All Metal Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 2 days SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 53.92689 IN3 Base (B) - Customary Gross Weight 0.0709 LB Base (B) - Customary Net Weight 0.0325 LB Base (B) - Metric Net Weight 0.01474 KG Base (B) - Metric Cubic Dimension 883.7 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 1078.53787 IN3 Shipper (6) - Customary Gross Weight 1.41804 LB Shipper (6) - Customary Net Weight 0.65003 LB Shipper (6) - Customary Height Dimension 6.9685 IN Shipper (6) - Customary Length Dimension 12.48031 IN Shipper (6) - Customary Width Dimension 12.40157 IN Shipper (6) - Metric Weight 0.6431 KG Shipper (6) - Metric Net Weight 0.2948 KG Shipper (6) - Metric Cubic Dimension 17674.0 CCM Shipper (6) - Metric Height Dimension 17.7 CM Shipper (6) - Metric Length Dimension 31.7 CM Shipper (6) - Metric Width Dimension 31.5 CM Shipper (6) - Item Quantity 20 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 93122.59718 IN3 Pallet (8) - Customary Gross Weight 110.25 LB Pallet (8) - Customary Net Weight 35.1014 LB Pallet (8) - Customary Height Dimension 46.85039 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 50.0 KG Pallet (8) - Metric Net Weight 15.919 KG Pallet (8) - Metric Cubic Dimension 1526000.0 CCM Pallet (8) - Metric Height Dimension 119.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 1080 Pallet (8) - Unit PAL