Main Picture
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1060H, White, 18 in x 50 ft, 60 mil, 1 Roll/Case
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1060H, White, 18 in x 50 ft, 60 mil, 1 Roll/Case
3M ID 7000124285 SAP ID 7000124285 Legacy SKU 70006427085 Product Number E1060H Local Catalog Identifier E1060H Base SKU B40067277 Keywords - 3M, Cushion-Mount Plus Plate Mounting Tape, flexographic print plates, foam mounting tape, high quality print, air release feature, medium density foam, white foam tape, flexographic photopolymer plate, print sleeve, steel cylinder, edge lifting resistance, challenging print conditions, thick plates, small print sleeves, air bubbles, cross-hatch pattern adhesive, clean removal, flexographic printing, wide-web presses, flexible packaging industry, tight print registration, compressible foam, long print runs, high speed print runs, acrylic adhesives, bubble-free mounting, printing quality, productivity, reduced air entrapment, micro-channels, smoother surfaces, commercial solutions, manufacturing applications, appliance bonding, assembly bonding, building maintenance, building repair, defense applications, paper and print industry.
- Flexo Tape
Brand Cushion-Mount™ Global Product Hierarchy Flexographic Plate Mounting Tapes Commodity 2660 - Flexographic & Splicing Tapes Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051115250064 Unit of Use (1) - Article Number 00051115250064 Shipper (6) - Article Number 00051115250064 Marketplace Formal Name 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1060H, White, 18 in x 50 ft, 60 mil, 1 Roll/Case Material Description E1060H MNTG WT 18INX50FT 1/CV Marketplace Description 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1060H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This white foam mounting tape provides high quality standard combination print. Marketplace Description Extended Bubble Free Flexographic Plate Mounting 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1060H is a white foam tape that provides high quality combination print. This is the standard tape for combination print. It has the air release feature that allows for bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal. Recommended Applications • Mounting photopolymer plates to flexographic printing cylinders and sleeves • Used in combination, process and solid printing processes • 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry. 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs. This cushion tape is manufactured for 60 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. On Easy with Reduced Air Entrapment 3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. Keep the Presses Running and your Customers Coming Back For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. Bullets - 0.060 inch (1.52 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates
- Cushioned flexographic plate mounting sticky back foam tape
- Flexographic printing, flexographic printers
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Has a standard medium density foam that is ideal for printing combinations of solids and process with halftone dots
- Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
- Plate demounts from the double coated cushioned tape without adhesive residue
- Print plates mounted on E1060H will have no air bubbles under the plate due to the air release feature designed into the tape
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Tape also removes cleanly from the sleeve or steel print cylinder
- White color indicates the standard, medium density foam
Adhesive Type Differential Acrylate Application Flexographic Plate Mounting Application Thickness (Imperial) 60 mil Application Thickness (Metric) 1.524 mm Backing Material Polyethylene Foam Overall Length (Imperial) 50 ft Overall Length (Metric) 15.24 m Overall Thickness (Imperial) 62 mil Overall Width (Imperial) 18 in Overall Width (Metric) 457.2 mm Primary Liner Polycoated Polyester Primary Liner Thickness (Imperial) 4.5 mil Primary Liner Thickness (Metric) 0.11 mm Product Color White Product Form Roll Total Tape Thickness without Liner (Imperial) 62 mil Total Tape Thickness without Liner (Metric) 1.52 mm ECCN EAR99 Harmonized Tariff Schedule Nbr 3919905060 Return Policy Description 0-30d:0%;31-180:15%;>180:no return Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 2 days SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 1419.78196 IN3 Base (B) - Customary Gross Weight 11.09997 LB Base (B) - Customary Net Weight 7.938 LB Base (B) - Metric Net Weight 3.6 KG Base (B) - Metric Cubic Dimension 23265.967 CCM Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit ROL Base (B) - Pallet Layer Quantity 5.00 Base (B) - Shipping Container Per Layer Quantity 12 Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 1419.78196 IN3 Shipper (6) - Customary Gross Weight 11.09997 LB Shipper (6) - Customary Net Weight 7.938 LB Shipper (6) - Customary Height Dimension 8.75 IN Shipper (6) - Customary Length Dimension 19.3748 IN Shipper (6) - Customary Width Dimension 8.3748 IN Shipper (6) - Metric Weight 5.034 KG Shipper (6) - Metric Net Weight 3.6 KG Shipper (6) - Metric Cubic Dimension 23265.967 CCM Shipper (6) - Metric Height Dimension 22.225 CM Shipper (6) - Metric Length Dimension 49.212 CM Shipper (6) - Metric Width Dimension 21.272 CM Shipper (6) - Previous Packaging Level Quantity 1.00 Shipper (6) - Previous Packaging Level Unit RLS Shipper (6) - Item Quantity 1 Shipper (6) - Total Unit Quantity 1.00 Shipper (6) - Item Unit RLS Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 98126.56374 IN3 Pallet (8) - Customary Gross Weight 701.19 LB Pallet (8) - Customary Net Weight 476.28 LB Pallet (8) - Customary Height Dimension 48.74016 IN Pallet (8) - Customary Length Dimension 47.99213 IN Pallet (8) - Customary Width Dimension 41.9685 IN Pallet (8) - Metric Weight 318.0 KG Pallet (8) - Metric Net Weight 216.0 KG Pallet (8) - Metric Cubic Dimension 1608000.0 CCM Pallet (8) - Metric Height Dimension 123.8 CM Pallet (8) - Metric Length Dimension 121.9 CM Pallet (8) - Metric Width Dimension 106.6 CM Pallet (8) - Previous Packaging Level Quantity 60.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 60 Pallet (8) - Total Unit Quantity 60.00 Pallet (8) - Item Unit RLS Pallet (8) - Unit PAL Pallet (8) - Pallet Layer Quantity 5.00 Pallet (8) - Shipping Container Per Layer Quantity 12