Main Picture
Dynatron™ Dyna-Hair Long Strand, Filler 472, 1 qt, 12 per case
Dynatron™ Dyna-Hair Long Strand, Filler 472, 1 qt, 12 per case
3M ID 7000125050 SAP ID 7000125050 Legacy SKU 70008003348 Part Number 00472 Local Catalog Identifier 472 Base SKU B40067501 Keywords - Cavity Wax, OEM Match, Body Coating, Urethane Seam Sealer, Plastic Repair, Structural Adhesive, Panel Bonding, Windscreen Bonding, Rocker Gard, no cleanup,
- dynatron dyna-hair long strand
Brand Dynatron™ Global Product Hierarchy Body Fillers Commodity 2820 - FACS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00076308004729 Consumer (2) - Article Number 00076308004729 Shipper (6) - Article Number 10076308004726 Marketplace Formal Name Dynatron™ Dyna-Hair Long Strand, Filler 472, 1 qt, 12 per case Material Description 00472,LONG STRAND FBGLS,1 QT,12/CS Marketplace Description Dynatron™ Dyna-Hair® Long Strand body filler repairs splits, cracks and holes in all kinds of surfaces, including wood, fiberglass, aluminum and bare or galvanized steel. Reinforced with long fiberglass strands, this waterproof filler offers additional versatility to any automotive repair. Marketplace Description Extended Balance of Performance Dynatron™ Dyna Hair® reinforced body filler provides a balance of performance and economy when repairing splits, cracks or rust holes in automotive bodies. Reinforced with long strand fiberglass, this filler creates waterproof repairs that are twice the strength of ordinary body fillers. Our two component polyester compound applies easily and creates a smooth, professional quality repair. This filler is produced with the highest quality resins, talc and microspheres. Dynalite has become an industry standard because it combines ease of use, faster working properties and top notch results. Automotive body technicians rely on our filler for its good adhesion, consistent quality and compatibility with most paints. It combines spreading, easy mixing, good featheredging, and non separating properties into one filler. Using Dynatron™ Dynalite™ Light Weight Body Filler is as easy as this simple 6 step process: 1. Clean the repair area using soap and water followed by a wax & grease remover/surface cleaner. Sand the surface as needed with grade P40 to P80 3M™ abrasive. Note: If grinding is required use a grade 50 3M™ grinding disc, blow off the sanding dust with clean dry air. If repairing galvanized steel, e coat, primed/ painted surfaces or aluminum, sand with grade P80 3M™ abrasive to remove the paint/primer. Blow off with clean dry compressed air and re clean the surface using a clean paper or cloth towel and a wax & grease remover/surface cleaner. 2. Apply the required amount of body filler to a clean mixing surface. (Do not use discarded cardboard as a mixing surface as contamination may occur.) The correct hardener to filler ratio = 3 inch diameter circle 1/2 inch thick of filler to a 3 inch strip of cream hardener. 3. Mix the body filler and cream hardener thoroughly, to a uniform color. Gel time/setting time is approximately 3-5 minutes @ 75°F (24°C) using 2% hardener as prescribed. Spread the filler on the mixing board, being sure to break any air bubbles that were introduced during mixing. 4. Apply a thin layer using firm pressure to ensure maximum adhesion being sure to “wet out” the surface completely. Apply additional filler in layers, building up the damaged area higher than the surrounding surface. Maximum filler thickness should not exceed 1/4 inch. Allow curing time of 20 minutes. 5. Sand the filler to the proper contour with 3M™ abrasives, using the following recommended grade sequence: P40, P80, P180. Note: If more filler is needed blow off with clean dry compressed air and follow steps 2 through 6. 6. Wait approximately 45 minutes before applying primer and paint, always follow your paint company’s recommended procedures. Bullets - Compatible with most automotive paints
- Creates a smooth, professional-quality repair
- Fills splits, cracks or holes in fiberglass or metal
- Improved strength and flexibility to prevent cracking
- Waterproof, for protected use in unpainted areas
Application - Dent Fill
- Fiberglass Repair
Consistency Paste Container Size (Imperial) 1 Gallon Container Size (Metric) 946.353 ml Container Type Can Performance Level Good Product Color Green Product Type Glass Reinforced Filler Volume (Imperial) 32 fl oz Volume (Metric) 0.95 L Return Policy Description No Return Sales unit KAN SAP Shelf Life In Days 365 Target Warehouse Location Lead Time 2 days SAP External Material Group 25000000 Base (B) - Billing Unit KAN Base (B) - Customary Cubic Dimension 86.93501 IN3 Base (B) - Customary Gross Weight 2.76948 LB Base (B) - Customary Net Weight 2.37699 LB Base (B) - Customary Height Dimension 4.81299 IN Base (B) - Customary Length Dimension 4.25 IN Base (B) - Customary Width Dimension 4.25 IN Base (B) - Metric Net Weight 1.078 KG Base (B) - Metric Cubic Dimension 1424.604 CCM Base (B) - Metric Height Dimension 12.225 CM Base (B) - Metric Length Dimension 10.795 CM Base (B) - Metric Width Dimension 10.795 CM Base (B) - Item Quantity 1 Base (B) - Unit KAN Consumer (2) - Billing Unit KAN Consumer (2) - Customary Cubic Dimension 86.93501 IN3 Consumer (2) - Customary Gross Weight 2.76948 LB Consumer (2) - Customary Net Weight 2.37699 LB Consumer (2) - Customary Height Dimension 4.81299 IN Consumer (2) - Customary Length Dimension 4.25 IN Consumer (2) - Customary Width Dimension 4.25 IN Consumer (2) - Metric Weight 1.256 KG Consumer (2) - Metric Net Weight 1.078 KG Consumer (2) - Metric Cubic Dimension 1424.604 CCM Consumer (2) - Metric Height Dimension 12.225 CM Consumer (2) - Metric Length Dimension 10.795 CM Consumer (2) - Metric Width Dimension 10.795 CM Consumer (2) - Item Quantity 1 Consumer (2) - Unit KAN Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit KAN Shipper (6) - Customary Cubic Dimension 1286.9167 IN3 Shipper (6) - Customary Gross Weight 34.24586 LB Shipper (6) - Customary Net Weight 28.52388 LB Shipper (6) - Customary Height Dimension 5.59055 IN Shipper (6) - Customary Length Dimension 17.40157 IN Shipper (6) - Customary Width Dimension 13.22835 IN Shipper (6) - Metric Weight 15.531 KG Shipper (6) - Metric Net Weight 12.936 KG Shipper (6) - Metric Cubic Dimension 21088.704 CCM Shipper (6) - Metric Height Dimension 14.2 CM Shipper (6) - Metric Length Dimension 44.2 CM Shipper (6) - Metric Width Dimension 33.6 CM Shipper (6) - Item Quantity 12 Shipper (6) - Unit CS Pallet (8) - Billing Unit KAN Pallet (8) - Customary Cubic Dimension 98614.7556 IN3 Pallet (8) - Customary Gross Weight 1949.22 LB Pallet (8) - Customary Net Weight 1597.33728 LB Pallet (8) - Customary Height Dimension 49.6063 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 884.0 KG Pallet (8) - Metric Net Weight 724.416 KG Pallet (8) - Metric Cubic Dimension 1616000.0 CCM Pallet (8) - Metric Height Dimension 126.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 672 Pallet (8) - Unit PAL