Main Picture
3M™ Cold Shrink Quick Insulator QI 10/37-270, 10/case
3M™ Cold Shrink Quick Insulator QI 10/37-270, 10/case
3M ID 7000133177 SAP ID 7000133177 Legacy SKU 80611442981 Part Number QI-10/37-270 Local Catalog Identifier QI-10/37-270 Base SKU B00019994 Keywords Cold Shrink, EPDM rubber insulating sleeve, Cold Shrink rubber insulating sleeve, Cold Shrink Quick Insulators QI Series, Cold Shrink Insulators QI Series, Quick Insulators QI Series, 3M Cold Shrink Insulator, Rubber Insulation, QI Series, Built-in mastic in electrical insulator, electrical insulation range taking Brand 3M™ Global Product Hierarchy Cold Shrink Tubing Commodity 2320 - Cable Acc,CS and L&M Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051128576984 Consumer (2) - Article Number 00051128576984 Shipper (6) - Article Number 50051128576989 Marketplace Formal Name 3M™ Cold Shrink Quick Insulator QI 10/37-270, 10/case Material Description QI-10/37-270 COLD SHRINK INSULATOR Marketplace Description 3M™ Cold Shrink Quick Insulator QI Series consists of open-ended and factory-expanded tubular rubber sleeves that feature sealing mastic on each end loaded on a removable plastic core. To install the connection, position it over the inline connector, pull the loose tab on the plastic core while unwinding the core in a counterclockwise direction, allowing the ends of the tube to shrink and form a secure seal. The core and tube sizing, combined with sealing mastic at each end, allow for a broader application range while preserving the seal and insulation properties of the EPDM rubber tube. Designed for primary insulation of solid dielectric insulated wires and cable splices rated up to 1000 volts, the insulators allow for direct burial or submersible applications. They are easy to install by hand, requiring no additional tools or heating sources. Accommodating a variety of cable sizes, 3M™ Cold Shrink Quick Insulator QI Series provides reliable thermal stability, high chemical resistance, and a water-resistant seal that meets the standard for ANSI C-119.1. These insulators are ideal for dig-in and sheath repairs, inline conductor transition connectors, and secondary splices for both copper and aluminum conductors, withstanding an operating temperature range between -40 °F to 194 °F (-40 °C to 90 °C). When you need dependable insulating properties with long-lasting resiliency and pressure performance, 3M™ Cold Shrink Quick Insulator QI Series is your go-to solution. Marketplace Description Extended 3M has over 40 years of lab-tested and industry-proven results demonstrating the reliability of cold shrink technology. 3M™ Cold Shrink Quick Insulator QI Series and the other products in the cold shrink family are engineered with specially formulated materials that deliver a durable environmental seal and insulation. Five diameter sizes accommodate cables up to 1000 volts, ranging from 8 AWG to 3000 kcmil, for both copper and aluminum conductors with crimped connectors. For applications with high UV exposure or where visual inspection isn't feasible, it is recommended to overwrap the tubing with Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70. Bullets - BUILT STRONG: Made of EPDM rubber, enduring operating temperatures ranging from -40 °F to 194 °F (-40 °C to 90 °C)
- DESIGNED TO PERFORM: Offers reliable primary insulation for solid dielectric wires and secondary splices rated up to 1000 volts
- EASY TO INSTALL: Requires no tools or heating sources and can be installed by hand
- HIGH-RESISTANCE: Provides excellent wet electrical properties and resists water, acids, and alkalis
- LONG-LASTING: Maintains thermal stability, resiliency, and pressure for dependable performance
- MULTIPURPOSE: For dig-in and sheath repairs, inline conductor transition connectors, and secondary splices for both copper and aluminum conductors
- WATER-RESISTANT SEAL: Meets the water-resistant requirements of ANSI C-119.1
- WORK YOUR WAY: Accommodates a variety of cable sizes that can be used in direct burial or submersible applications
Application - Insulation, mechanical protection, repair
- Cable Connection
Cable Shielding Non-shielded Cable Type Power Cable Conductor Material - Copper
- Aluminum
Conductor Sizes (Imperial) - 250 kcmil
- 750 kcmil
- 1 AWG
- 2 AWG
- 3/0 AWG
- 2/0 AWG
- 500 kcmil
- 4/0 AWG
- 1/0 AWG
- 350 kcmil
- 300 kcmil
- 650 kcmil
- 600 kcmil
- 400 kcmil
- 700 kcmil
Indoor/Outdoor Both Inner Diameter After Shrink (Imperial) 0.4 in Inner Diameter After Shrink (Metric) 10.2 mm Inner Diameter Before Shrink (Imperial) 1.45 in Inner Diameter Before Shrink (Metric) 36.8 mm Material EPDM Rubber Maximum Conductor Size (Imperial) 4/0 AWG Maximum Conductor Size (Metric) 95 mm² Maximum Operating Temperature (Celsius) 90 °C Maximum Operating Temperature (Fahrenheit) 194 °F Minimum Conductor Size (Imperial) 2 AWG (Aluminum) Minimum Conductor Size (Metric) 35 mm² (Aluminum) Minimum Operating Temperature (Celsius) -40 °C Minimum Operating Temperature (Fahrenheit) -40 °F Model Cold-shrink Number of Conductors 1 Product Color Black Product Type Splice Splice Type Cold Shrink Voltage 1 kV Sales unit EA SAP Shelf Life In Days 60 Target Warehouse Location Lead Time 2 days SAP External Material Group 31270000 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 360.0014 IN3 Base (B) - Customary Gross Weight 0.5755 LB Base (B) - Customary Net Weight 0.57548 LB Base (B) - Customary Height Dimension 2 IN Base (B) - Customary Length Dimension 20 IN Base (B) - Customary Width Dimension 9 IN Base (B) - Metric Net Weight 0.26099 KG Base (B) - Metric Cubic Dimension 5899.343 CCM Base (B) - Metric Height Dimension 5.08 CM Base (B) - Metric Length Dimension 50.8 CM Base (B) - Metric Width Dimension 22.86 CM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Billing Unit EA Consumer (2) - Customary Cubic Dimension 360.0014 IN3 Consumer (2) - Customary Gross Weight 0.5755 LB Consumer (2) - Customary Net Weight 0.57548 LB Consumer (2) - Customary Height Dimension 2 IN Consumer (2) - Customary Length Dimension 20 IN Consumer (2) - Customary Width Dimension 9 IN Consumer (2) - Metric Weight 0.260997 KG Consumer (2) - Metric Net Weight 0.26099 KG Consumer (2) - Metric Cubic Dimension 5899.343 CCM Consumer (2) - Metric Height Dimension 5.08 CM Consumer (2) - Metric Length Dimension 50.8 CM Consumer (2) - Metric Width Dimension 22.86 CM Consumer (2) - Item Quantity 1 Consumer (2) - Unit EA Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 1309.57466 IN3 Shipper (6) - Customary Gross Weight 6.42096 LB Shipper (6) - Customary Net Weight 5.75505 LB Shipper (6) - Customary Height Dimension 6.69291 IN Shipper (6) - Customary Length Dimension 16.45669 IN Shipper (6) - Customary Width Dimension 11.88976 IN Shipper (6) - Metric Weight 2.912 KG Shipper (6) - Metric Net Weight 2.61 KG Shipper (6) - Metric Cubic Dimension 21460.0 CCM Shipper (6) - Metric Height Dimension 17.0 CM Shipper (6) - Metric Length Dimension 41.8 CM Shipper (6) - Metric Width Dimension 30.2 CM Shipper (6) - Item Quantity 10 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 92390.30939 IN3 Pallet (8) - Customary Gross Weight 377.055 LB Pallet (8) - Customary Net Weight 310.76168 LB Pallet (8) - Customary Height Dimension 45.66929 IN Pallet (8) - Customary Length Dimension 48.0315 IN Pallet (8) - Customary Width Dimension 42.12598 IN Pallet (8) - Metric Weight 171.0 KG Pallet (8) - Metric Net Weight 140.935 KG Pallet (8) - Metric Cubic Dimension 1514000.0 CCM Pallet (8) - Metric Height Dimension 116.0 CM Pallet (8) - Metric Length Dimension 122.0 CM Pallet (8) - Metric Width Dimension 107.0 CM Pallet (8) - Item Quantity 540 Pallet (8) - Unit PAL