Main Picture
3M™ PPS™ Lids 16337, Midi (13.5 fl oz, 400 mL), 125 micron filters, 5000 Lids/Pallet
3M™ PPS™ Lids 16337, Midi (13.5 fl oz, 400 mL), 125 micron filters, 5000 Lids/Pallet
3M ID 7010028751 SAP ID 7010028751 Legacy SKU 60455066450 Part Number 16337 Local Catalog Identifier 16337 Base SKU B5000000260 Keywords 3m pps, 3m pps adapter, pps, 3m pps cups, 3m pps system, pps system 3m, 3m cup liners, 3m cups, 3m performance spray gun, car paint spraying, Brand PPS™ Global Product Hierarchy Lids & Liners Commodity 3340 - PAS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051131163379 Unit of Use (1) - Article Number 00051131163379 Shipper (6) - Article Number 50051131163374 Pallet (8) - Article Number 50051131163374 Marketplace Formal Name 3M™ PPS™ Lids 16337, Midi (13.5 fl oz, 400 mL), 125 micron filters, 5000 Lids/Pallet Material Description 16337, MIDI LIDS 125U, BULK/5000 Marketplace Description 3M™ PPS™ Lids come in cases containing 25 lids, each with a welded-in filter to strain coating material while spraying, for use with the 3M™ PPS™ paint preparation system. Two Lid sizes are available for a range of jobs large (fit with standard and large cups and liners) and small (fit with Midi cups and liners). Marketplace Description Extended Bulk Lids for Added Efficiency with 3M™ PPS™Excellent for stocking PPS™ Lids efficiently and cost-effectively, 3M™ PPS™ Lids are available in cases containing 25 disposable lids with pre-welded micron filters for straining paint materials. Lids feature either 125 micron filters (light blue)), often recommended for water-borne paint materials; or 200 micron filters (clear) for traditional solvent-based paint materials. Always reference the paint manufacturer to ensure the recommended filter to strain the paint material. Lids and sealing plugs are designed specifically for the 3M™ PPS™ paint preparation system. Lids are sized for the range of 3M™ PPS™ Cups, allowing technicians to up to 28 fluid oz (850 mL). Lid sizes include: • 3M™ PPS™ Midi Lids – for use with 13.5 fluid oz (400mL) 3M™ PPS™ Cups, ideal for spot and 2-panel repairs • 3M™ PPS™ Standard and Large Lids – for use with 22 fluid oz (650mL) and 28 fluid oz (850mL) PPS™ Cups, excellent for 3-panel and 4-panel repairs Advantages of the 3M™ PPS™ System Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, youre ready to start spraying. Your Spray Gun Functions at any Angle, Even Upside Down PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees. Clean Up is a Breeze and Uses Less Solvent After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. A Versatile System that Works with Most Spray Guns Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters also have the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. Reduces the Chance of Contamination Between Jobs Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. The Bottom Line: Why 3M™ PPS™ is the Paint and Coatings Spray System of Choice 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup. Bullets - 25 individual PPS™ Lids only
- Choose 200 micron or 125 micron filters for solvent or waterborne paint systems
- Designed for use with the original 3M™ PPS™ paint preparation system
- Fits Large/Standard and Midi PPS™ cup sizes for a wide range of jobs
- PPS™ is an all-in-one disposable solution for mixing and measuring, filtering, spraying
- PPS™ reduces cleaning solvent consumption by up to 70%
- Reduces chance of outside contamination, maintains consistent material transfer and reduces paint consumption
- Reduces prep and clean-up time by as much as 50%
- System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use
- System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
Application - Paint Application
- Coating spraying
- Manual Spray Coating
- Painting
Filter Micron Rating 125 micron Product Type Lid ECCN EAR99 Harmonized Tariff Schedule Nbr 8424909080 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit EA SAP Shelf Life In Days 0 Target Warehouse Location Lead Time 23 SAP External Material Group 25000000 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 14.53591 IN3 Base (B) - Customary Gross Weight 0.05701 LB Base (B) - Customary Net Weight 0.04631 LB Base (B) - Metric Net Weight 0.021 KG Base (B) - Metric Cubic Dimension 238.2 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 72679.56307 IN3 Shipper (6) - Customary Gross Weight 285.04917 LB Shipper (6) - Customary Net Weight 231.525 LB Shipper (6) - Customary Height Dimension 34.48819 IN Shipper (6) - Customary Length Dimension 49.01575 IN Shipper (6) - Customary Width Dimension 42.99213 IN Shipper (6) - Metric Weight 129.274 KG Shipper (6) - Metric Net Weight 105.0 KG Shipper (6) - Metric Cubic Dimension 1191000.0 CCM Shipper (6) - Metric Height Dimension 87.6 CM Shipper (6) - Metric Length Dimension 124.5 CM Shipper (6) - Metric Width Dimension 109.2 CM Shipper (6) - Item Quantity 5000 Shipper (6) - Unit PAL Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 72679.56307 IN3 Pallet (8) - Customary Gross Weight 285.04917 LB Pallet (8) - Customary Net Weight 231.525 LB Pallet (8) - Customary Height Dimension 34.48819 IN Pallet (8) - Customary Length Dimension 49.01575 IN Pallet (8) - Customary Width Dimension 42.99213 IN Pallet (8) - Metric Weight 129.274 KG Pallet (8) - Metric Net Weight 105.0 KG Pallet (8) - Metric Cubic Dimension 1191000.0 CCM Pallet (8) - Metric Height Dimension 87.6 CM Pallet (8) - Metric Length Dimension 124.5 CM Pallet (8) - Metric Width Dimension 109.2 CM Pallet (8) - Item Quantity 5000 Pallet (8) - Unit PAL