Main Picture
Scotch-Brite™ EX2 Deburring Wheel, 7 in x 1 in x 1 in 8S FIN, 3 ea/Case, SPR 017461A
Scotch-Brite™ EX2 Deburring Wheel, 7 in x 1 in x 1 in 8S FIN, 3 ea/Case, SPR 017461A
3M ID 7010290830 SAP ID 7010290830 Legacy SKU 61500181468 Base SKU B40071655 Keywords ex2, deburring wheel, surface conditioner, 3m deburring wheel, abrasive Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011314013 Unit of Use (1) - Article Number 00048011314013 Shipper (6) - Article Number 50048011314018 Marketplace Formal Name Scotch-Brite™ EX2 Deburring Wheel, 7 in x 1 in x 1 in 8S FIN, 3 ea/Case, SPR 017461A Material Description X2-WL 8S FIN 7 x 1 x 1 IN SPR017461A WL Marketplace Description Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs. Marketplace Description Extended Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives. Our Scotch-Brite™ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into nonwoven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Minimizes heat build up to lessen impact on heat-sensitive materials
- Resists smearing for cleaner surfaces and less preparation
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
Abrasive Material Silicon Carbide Application - Finishing
- Polishing
- Deburring
Attachment Type Center Hole Center Hole Diameter (Imperial) 1 in Center Hole Diameter (Metric) 25.4 mm Density 8 Face Width (Imperial) 1 in Face Width (Metric) 25.4 mm Grade Fine Grit Non Pertinent Overall Diameter (Imperial) 7 in Overall Diameter (Metric) 177.8 mm Product Color Gray Product Form Convolute Wheel Sub Applications - Blending
- Flat Finishing
Substrate - Glass
- Composite
ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 20 SAP External Material Group 31191600 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 49.00018 IN3 Base (B) - Customary Gross Weight 1.04517 LB Base (B) - Customary Net Weight 1.04297 LB Base (B) - Customary Height Dimension 7 IN Base (B) - Customary Length Dimension 1 IN Base (B) - Customary Width Dimension 7 IN Base (B) - Metric Net Weight 0.473 KG Base (B) - Metric Cubic Dimension 802.966 CCM Base (B) - Metric Height Dimension 17.78 CM Base (B) - Metric Length Dimension 2.54 CM Base (B) - Metric Width Dimension 17.78 CM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 317.89925 IN3 Shipper (6) - Customary Gross Weight 3.36042 LB Shipper (6) - Customary Net Weight 3.1311 LB Shipper (6) - Customary Height Dimension 4.2 IN Shipper (6) - Customary Length Dimension 8.7 IN Shipper (6) - Customary Width Dimension 8.7 IN Shipper (6) - Metric Weight 1.524 KG Shipper (6) - Metric Net Weight 1.42 KG Shipper (6) - Metric Cubic Dimension 5209.415 CCM Shipper (6) - Metric Height Dimension 10.668 CM Shipper (6) - Metric Length Dimension 22.098 CM Shipper (6) - Metric Width Dimension 22.098 CM Shipper (6) - Item Quantity 3 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 94510.29035 IN3 Pallet (8) - Customary Gross Weight 707.11925 LB Pallet (8) - Customary Net Weight 626.22 LB Pallet (8) - Customary Height Dimension 46.87992 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 320.689 KG Pallet (8) - Metric Net Weight 284.0 KG Pallet (8) - Metric Cubic Dimension 1548740.128 CCM Pallet (8) - Metric Height Dimension 119.075 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 600 Pallet (8) - Unit PAL