Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Coarse, TS, 4 in, 25/Carton, 100 ea/Case
Main PictureDownload

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Coarse, TS, 4 in, 25/Carton, 100 ea/Case

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Coarse, TS, 4 in, 25/Carton, 100 ea/Case

  • 3M ID7010328682
    SAP ID7010328682
    Legacy SKU61500052578
    Product NumberSC-DS
    Base SKUB40064719
    Keywords3M, Scotch-Brite, Roloc, surface conditioning disc, quick change attachment, non-woven fiber, aluminum oxide, silicon carbide, blending, deburring, finishing, grinding, polishing, radiusing, refining, surface preparation, metalworking, woodworking, abrasives, industrial abrasives, metal fabrication, equipment maintenance, facility maintenance, automotive, collision repair, marine, oil and gas, rail transportation, personal recreation vehicles, commercial vehicles, construction, manufacturing, easy attachment, high cut-rate, low heat retention, durable abrasive, load resistant, consistent finishing, undercutting, gouging, irregular surfaces, contoured surfaces.
    BrandScotch-Brite™
    Global Product HierarchyQuick Change Discs
    Commodity1150 - Surface Conditioning Prod
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00048011132617
    Unit of Use (1) - Article Number00048011132617
    Inner (3) - Article Number30048011132618
    Shipper (6) - Article Number50048011132612
  • Marketplace Formal NameScotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Coarse, TS, 4 in, 25/Carton, 100 ea/Case
    Material DescriptionSC-DS A CRS 4in TS 25/100 DC
    Marketplace DescriptionScotch-Brite™ Roloc™ SC Surface Conditioning Discs combine durable, nonwoven disc with the efficiency of the 3M™ Roloc™ quick-change attachment system for an effective disc that cleans, finishes, blends, and deburrs. The nonwoven fiber construction conforms well to help preserve irregular or contoured surfaces and the Roloc™ backing supports the disc for aggressive cutting.
    Marketplace Description ExtendedThe open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. Our 3M™ Roloc™ attachment system offers quick and easy disc change-out, making the Roloc™ SC Surface Conditioning Disc ideal for a range of tasks including blending, deburring, and finishing. We use aluminum oxide abrasive in Scotch-Brite™ Roloc™ SC Surface Conditioning Discs. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. We developed Scotch-Brite™ surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc. 3M™ Roloc™ TR quick change discs are smaller discs that have a plastic threaded button or screw designed to easily and quickly screw onto a Roloc™ TR disc pad (sold separately) so that you can conveniently change discs with a simple twist-off, twist-on motion. The Roloc TR system provides a secure attachment even for heavy-duty applications, and the variety of available 3M™ Roloc™ discs allows swapping from one application to the next in seconds.
    Bullets
    • AVAILABLE IN A RANGE OF GRADES: Choose from Super Fine (SFN), Very Fine (VFN), Medium (MED), and Coarse (CRS) to fit your application needs
    • CHOOSE YOUR MINERAL: Discs are available either powered by super-sharp silicon carbide (SiC) that excels in low-pressure and fine finishing applications or made from harder and more durable aluminum oxide (A/O)
    • CONFORMABLE NONWOVEN WEB: Springy nonwoven fibers resist loading, conform to irregular or contoured surfaces, and minimize undercutting and gouging
    • GREAT FOR LOW-TO-MEDIUM PRESSURE: Built for consistency in blending, cleaning, deburring, finishing, grinding, polishing, radiusing, refining, and surface preparation, depending on the chosen grade
    • QUICK AND EASY ATTACHMENT: Convenient 3M™ Roloc™ Attachment System allows for fast disc changes
    • WORKS ON A RANGE OF METALS: This multipurpose option is great for use on aluminum, mild steel, nickel alloy, stainless steel, and titanium
  • Abrasive MaterialAluminum Oxide
    Application
    • Cleaning
    • Blending
    • Refining
    • Deburring
  • Attachment TypeTS
    Backing MaterialNon-woven
    Backing WeightNon Pertinent
  • Center Hole Thread SizeNon Pertinent
  • GradeCoarse
    GritNon Pertinent
  • Maximum Speed12000 rpm
  • Micron GradeNon Pertinent
  • Overall Diameter (Imperial)4 in
    Overall Diameter (Metric)101.6 mm
  • Product ColorBrown
    Product FormDisc
  • Sub Applications
    • Light Deburring
    • Sanding
    • General Purpose Sanding
    • Intermediate Sanding
    • Blending
    • Finishing
    • Light Grinding
    • Refining
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    Substrate
    • Nickel Alloy
    • Stainless Steel
    • Aluminum
    • Titanium
    • Mild Steel
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr6805301000
    Return Policy DescriptionNo Return
    Sales unitEA
    SAP Shelf Life In Days1825
    Target Warehouse Location Lead Time6
    SAP External Material Group31191506
  • Base (B) - Billing UnitEA
    Base (B) - Customary Cubic Dimension0.16 IN3
    Base (B) - Customary Gross Weight0.04001 LB
    Base (B) - Customary Net Weight0.04 LB
    Base (B) - Customary Height Dimension0.01 IN
    Base (B) - Customary Length Dimension4 IN
    Base (B) - Customary Width Dimension4 IN
    Base (B) - Metric Net Weight0.01814 KG
    Base (B) - Metric Cubic Dimension2.62193024 CCM
    Base (B) - Metric Height Dimension0.0254 CM
    Base (B) - Metric Length Dimension10.16 CM
    Base (B) - Metric Width Dimension10.16 CM
    Base (B) - Item Quantity1
    Base (B) - UnitEA
  • Consumer (2) - Item Quantity0
  • Inner (3) - Billing UnitEA
    Inner (3) - Customary Cubic Dimension367.50143 IN3
    Inner (3) - Customary Gross Weight1.36223 LB
    Inner (3) - Customary Net Weight0.99997 LB
    Inner (3) - Customary Height Dimension7.5 IN
    Inner (3) - Customary Length Dimension7 IN
    Inner (3) - Customary Width Dimension7 IN
    Inner (3) - Metric Weight0.617792 KG
    Inner (3) - Metric Net Weight0.4535 KG
    Inner (3) - Metric Cubic Dimension6022.246 CCM
    Inner (3) - Metric Height Dimension19.05 CM
    Inner (3) - Metric Length Dimension17.78 CM
    Inner (3) - Metric Width Dimension17.78 CM
    Inner (3) - Item Quantity25
    Inner (3) - UnitKAR
  • Shipper (6) - Billing UnitEA
    Shipper (6) - Customary Cubic Dimension1724.55874 IN3
    Shipper (6) - Customary Gross Weight5.94909 LB
    Shipper (6) - Customary Net Weight3.99987 LB
    Shipper (6) - Customary Height Dimension8.06299 IN
    Shipper (6) - Customary Length Dimension14.6248 IN
    Shipper (6) - Customary Width Dimension14.6248 IN
    Shipper (6) - Metric Weight2.698 KG
    Shipper (6) - Metric Net Weight1.814 KG
    Shipper (6) - Metric Cubic Dimension28260.344 CCM
    Shipper (6) - Metric Height Dimension20.48 CM
    Shipper (6) - Metric Length Dimension37.147 CM
    Shipper (6) - Metric Width Dimension37.147 CM
    Shipper (6) - Item Quantity100
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitEA
    Pallet (8) - Customary Cubic Dimension91526.75743 IN3
    Pallet (8) - Customary Gross Weight209.034 LB
    Pallet (8) - Customary Net Weight119.9961 LB
    Pallet (8) - Customary Height Dimension45.4 IN
    Pallet (8) - Customary Length Dimension48 IN
    Pallet (8) - Customary Width Dimension42 IN
    Pallet (8) - Metric Weight94.8 KG
    Pallet (8) - Metric Net Weight54.42 KG
    Pallet (8) - Metric Cubic Dimension1499848.974 CCM
    Pallet (8) - Metric Height Dimension115.316 CM
    Pallet (8) - Metric Length Dimension121.92 CM
    Pallet (8) - Metric Width Dimension106.68 CM
    Pallet (8) - Item Quantity3000
    Pallet (8) - UnitPAL