Main Picture
Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Medium, 14 in x 3 in x 8 in, 1 ea/Case
Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Medium, 14 in x 3 in x 8 in, 1 ea/Case
3M ID 7010329187 SAP ID 7010329187 Legacy SKU 61500068772 Product Number MU-WL Base SKU B40071671 Keywords multi finishing wheel, surface conditioner, scotch brite wheel, 3m scotch brite wheel, abrasive Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011146386 Unit of Use (1) - Article Number 00048011146386 Shipper (6) - Article Number 50048011146381 Marketplace Formal Name Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Medium, 14 in x 3 in x 8 in, 1 ea/Case Material Description MU-WL 2S MED 14 x 3 x 8in 1 ea WL Marketplace Description Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed. Marketplace Description Extended Our Scotch-Brite™ Multi-Finishing Wheel is ideal for producing #3 or #4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The Multi-Finishing Wheel runs cool and resists loading due to its open-web construction, reducing the risk of part discoloration and warping while extending the life of the wheel. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive. Our Scotch-Brite™ Multi-Finishing Wheel uses silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - CENTER HOLE ATTACHMENT: Utilize flanging or adaptors to adjust the center hole to a smaller size that fit your needs
- CHOOSE YOUR GRADE: Available in 2S Fine, 2S Medium, 2S Coarse, 3S Fine, 3S Medium, 3S Coarse, 4S Medium, and 4S Coarse
- CONFORMABLE NONWOVEN WEB: Scotch-Brite™ nonwoven synthetic fiber and abrasive mineral forms a web that is open, tough, conformable, and long-lasting
- FINISHING MADE EASY: Well suited for final finishing applications and producing uniform, appealing, and bright finishes on various metals
- MADE FOR METAL: Provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals
- RELIABLE RESULTS: Highly conformable construction enables the finishing of large areas to a uniform and appealing finish
- THE RIGHT MINERAL FOR THE JOB: This wheel utilizes silicon carbide, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as finishing and cleaning
Abrasive Material Silicon Carbide Application - Surface Preparation
- Finishing
- Polishing
Attachment Type Center Hole Center Hole Diameter (Imperial) 8 in Center Hole Diameter (Metric) 203.2 mm Density 2 Face Width (Imperial) 3 in Face Width (Metric) 76.2 mm Grade Medium Grit Non Pertinent Maximum Speed 2550 rpm Overall Diameter (Imperial) 14 in Overall Diameter (Metric) 355.6 mm Product Color Gray Product Form Convolute Wheel Sub Applications - Blending
- Straightline - Brushed Finish
- Weld Cleaning
Substrate - Soft Metal
- Stainless Steel
- Aluminum
ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 8 SAP External Material Group 31191600 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 567.67724 IN3 Base (B) - Customary Gross Weight 5.17073 LB Base (B) - Customary Net Weight 4.70327 LB Base (B) - Metric Net Weight 2.133 KG Base (B) - Metric Cubic Dimension 9302.527 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 567.67724 IN3 Shipper (6) - Customary Gross Weight 5.17073 LB Shipper (6) - Customary Net Weight 4.70327 LB Shipper (6) - Customary Height Dimension 2.7 IN Shipper (6) - Customary Length Dimension 14.5 IN Shipper (6) - Customary Width Dimension 14.5 IN Shipper (6) - Metric Weight 2.345 KG Shipper (6) - Metric Net Weight 2.133 KG Shipper (6) - Metric Cubic Dimension 9302.527 CCM Shipper (6) - Metric Height Dimension 6.858 CM Shipper (6) - Metric Length Dimension 36.83 CM Shipper (6) - Metric Width Dimension 36.83 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 96929.49985 IN3 Pallet (8) - Customary Gross Weight 501.08405 LB Pallet (8) - Customary Net Weight 423.29385 LB Pallet (8) - Customary Height Dimension 48.07992 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 227.249 KG Pallet (8) - Metric Net Weight 191.97 KG Pallet (8) - Metric Cubic Dimension 1588383.714 CCM Pallet (8) - Metric Height Dimension 122.123 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 90 Pallet (8) - Unit PAL