Main Picture
3M™ Performance Masking Tape 2380, Tan, 6 mm x 55 m, 7.2 mil, 144 Rolls/Case, Plastic Core
3M™ Performance Masking Tape 2380, Tan, 6 mm x 55 m, 7.2 mil, 144 Rolls/Case, Plastic Core
3M ID 7010334580 SAP ID 7010334580 Legacy SKU 70006285897 Part Number 2380 Product Number 2380 Local Catalog Identifier 2380 Base SKU B40067086 Keywords 3M, performance masking tape, industrial masking tape, high temperature resistance, paint masking, clean removal, adhesive bonds, automotive paint jobs, aerospace paint jobs, marine paint jobs, specialty vehicle paint jobs, custom paint applications, crepe paper tape, strong adhesion, tough backing, heat resistance, irregular surfaces, precise paint lines, sliver resistant, one-piece removal, paint processes, overspray protection, surface protection, temporary repairs, bundling, labeling, sealing, splicing, automotive aftermarket, general manufacturing, construction supplies, warehousing items, military applications, shipping industry, commercial vehicles, industrial applications, masking tape colors, 3m masking tape, painter's tape, tan masking tape, high performance masking Brand 3M™ Global Product Hierarchy Masking Tapes Commodity 2740 - Specialty Masking Systems Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00021200445866 Unit of Use (1) - Article Number 00021200445866 Inner (3) - Article Number 30021200445867 Shipper (6) - Article Number 50021200445861 Marketplace Formal Name 3M™ Performance Masking Tape 2380, Tan, 6 mm x 55 m, 7.2 mil, 144 Rolls/Case, Plastic Core Material Description 2380 TAN 6 MM X 55 M 144/CV PLST CORE Marketplace Description 3M™ Performance Masking Tape 2380 was designed for industrial use where the best possible paint line is desired and drying conditions range from air dry to oven bake. Its smooth, strong, mini-crepe paper masking tape holds fast, removes easily and will give you great performance for most paint masking applications. Marketplace Description Extended Among Our Greatest Crepe Tapes This highly versatile tape has all the features that are desirable for a high performance masking tape, such as strong adhesion, tough backing, excellent heat resistance and easy removal. It remains in place around corners, contours, and irregular surfaces to provide sharp paint lines in paint applications. 3M™ Performance Masking Tape 2380 has been laboratory tested on painted steel panels and found to remove cleanly for up to 30 minutes at bake temperatures up to 325ºF/ 162ºC. The adhesive bonds instantly to paper, metal, wood, and painted surfaces with reliable holding power that resists lifting and curling, essential for producing precise paint lines. 3M™ Performance Masking Tape 2380 also features one-piece removal and is sliver resistant under normal operating conditions. Recommended Applications Industrial paint masking for specialty vehicle, automotive, rail, marine and aerospace paint jobs Paint masking for high temperature paint processes Paint masking for custom, two-tone and multiple color applications What is Masking Tape? Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application. A masking tape should specify what surfaces it will stick to and the interval over which it will remove cleanly. A very thin or poorly manufactured tape may demonstrate splintering or shredding, either coming off the roll or when being removed after use. Some masking tapes have the tensile strength for light commercial and industrial applications, including bundling, labeling, sealing, temporary repairs, lane marking, splicing, and surface protection. From wide to narrow, single rolls to bulk, there are many options to choose from when ordering masking tape. The classic crepe paper masking tape is a light tan color, but masking tapes from 3M come in a variety of colors and formulations to meet general and specific applications. From wide to narrow, single rolls to bulk, there are many options to choose from when ordering masking tape. A roll of masking tape is a basic toolbox or supply room item in construction, warehousing, military, marine, shipping, automotive aftermarket, and general manufacturing. Bullets - Adhesive bonds instantly to many surfaces, holding in place without lifting or curling
- Clean, one-piece removal at bake temperatures up to 325° F/162° C for 30 minutes
- Heavy crepe paper backing resists bleed-through
- Industrial masking tape that provides strong holding power and exceptional high-temperature resistance
- Resists slivering when exposed to high heat
Adhesive Type Natural Rubber/Synthetic Rubber Application Painting & Depainting Backing (Carrier) Material Crepe Paper Indoor/Outdoor Indoor Maximum Operating Temperature (Celsius) 163 °C Maximum Operating Temperature (Fahrenheit) 325 °F Overall Length (Imperial) 60.14 yd Overall Length (Metric) 55 m Overall Width (Imperial) 0.23 in Overall Width (Metric) 6 mm Product Color Tan Tensile Strength (Imperial) [Missing translation: 448] Tensile Strength (Metric) 49 N/100mm ECCN EAR99 Harmonized Tariff Schedule Nbr 4811412100 Return Policy Description 0-30d:0%;31-180:15%;>180:no return Sales unit ROL SAP Shelf Life In Days 547 Target Warehouse Location Lead Time 20 SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 14.3399 IN3 Base (B) - Customary Gross Weight 0.10942 LB Base (B) - Customary Net Weight 0.10422 LB Base (B) - Metric Net Weight 0.047264 KG Base (B) - Metric Cubic Dimension 234.988 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Billing Unit ROL Inner (3) - Customary Cubic Dimension 191.78202 IN3 Inner (3) - Customary Gross Weight 3.75264 LB Inner (3) - Customary Net Weight 3.75182 LB Inner (3) - Customary Height Dimension 4.75 IN Inner (3) - Customary Length Dimension 8.5 IN Inner (3) - Customary Width Dimension 4.75 IN Inner (3) - Metric Weight 1.701878 KG Inner (3) - Metric Net Weight 1.701504 KG Inner (3) - Metric Cubic Dimension 3142.732 CCM Inner (3) - Metric Height Dimension 12.065 CM Inner (3) - Metric Length Dimension 21.59 CM Inner (3) - Metric Width Dimension 12.065 CM Inner (3) - Item Quantity 36 Inner (3) - Unit PAK Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 2064.94807 IN3 Shipper (6) - Customary Gross Weight 15.7564 LB Shipper (6) - Customary Net Weight 15.00727 LB Shipper (6) - Customary Height Dimension 11.5 IN Shipper (6) - Customary Length Dimension 13.4 IN Shipper (6) - Customary Width Dimension 13.4 IN Shipper (6) - Metric Weight 7.145758 KG Shipper (6) - Metric Net Weight 6.806016 KG Shipper (6) - Metric Cubic Dimension 33838.304 CCM Shipper (6) - Metric Height Dimension 29.21 CM Shipper (6) - Metric Length Dimension 34.036 CM Shipper (6) - Metric Width Dimension 34.036 CM Shipper (6) - Item Quantity 144 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 103824.4055 IN3 Pallet (8) - Customary Gross Weight 598.10184 LB Pallet (8) - Customary Net Weight 540.26249 LB Pallet (8) - Customary Height Dimension 51.5 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 271.248 KG Pallet (8) - Metric Net Weight 245.017 KG Pallet (8) - Metric Cubic Dimension 1701370.533 CCM Pallet (8) - Metric Height Dimension 130.81 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 5184 Pallet (8) - Unit PAL