3M™ Roloc™ Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 50/Carton, 200 ea/Case
Main PictureDownload

3M™ Roloc™ Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 50/Carton, 200 ea/Case

3M™ Roloc™ Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 50/Carton, 200 ea/Case

  • 3M ID7010363894
    SAP ID7010363894
    Legacy SKU60650017506
    Product Number777F
    Base SKUB40071639
    Keywords3M, Roloc Disc, Ceramic abrasive grain, Aluminum oxide, Durable abrasive, High cut-rate abrasive, Wet and dry applications, Polyester backing, Grinding aid, Heat-sensitive alloys, Stainless steel grinding, Nickel alloy grinding, Titanium grinding, Resin-bonded abrasive, Heat-resistant abrasive, Stock removal abrasive, Moderate stock removal, Industrial abrasives, Metal fabrication, Metalworking, Energy markets, Manufacturing markets, Transportation markets, Equipment maintenance, Facility maintenance, Oil and gas industry, Personal recreation vehicles, Rig fabrication.
    BrandRoloc™
    Global Product HierarchyQuick Change Discs
    Commodity1110 - Coated Abrasives non PSG
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00051144767465
    Unit of Use (1) - Article Number00051144767465
    Inner (3) - Article Number30051144767466
    Shipper (6) - Article Number50051144767460
  • Marketplace Formal Name3M™ Roloc™ Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 50/Carton, 200 ea/Case
    Material Description777F 50 2in TS RS200P 50/200 DC
    Marketplace Description3M™ Roloc™ Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
    Marketplace Description ExtendedOur 3M™ Roloc™ Disc 777F disc is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys. 3M™ Ceramic Abrasive Grain is a ceramic mineral designed using a 3M process to enhance toughness and hardness of the grain. For increased performance, 3M™ Roloc™ Disc 777F products feature aluminum oxide blended with 3M™ Ceramic Abrasive Grain for one of the hardest, long-lasting minerals available. Perfect for moderate stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding into finishing applications. The 3M™ Roloc™ Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, and TS. Please select discs with the attachment design made for your system.
    Bullets
    • 3M™ Roloc™ attachment system enables efficient and secure attachment and removal of the disc
    • A blend of ceramic and aluminum oxide mineral offers improved durability and cut-rate over aluminum oxide
    • Grinding aid reduces grinding temperatures for processes involving heat-sensitive alloys such as stainless steel, nickel alloys, and titanium
    • Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat, and water
    • Polyester backing is extremely tough to support medium-pressure applications while maintaining consistent performance in both wet and dry applications
  • Abrasive MaterialCeramic Aluminum Oxide
    Application
    • Surface Preparation
    • Grinding
    • Finishing
    • Deburring
  • Attachment TypeTS
    Backing MaterialPolyester Cloth
    Backing WeightYF Weight
    Bond TypeResin
  • Center Hole Thread SizeNon Pertinent
  • GradeNon Pertinent
    Grit50
  • Maximum Speed25000 rpm
  • Micron GradeNon Pertinent
  • Overall Diameter (Imperial)2 in
    Overall Diameter (Metric)50.8 mm
  • Product ColorOrange
    Product FormDisc
    Sanding TypeWet/Dry
  • Sub Applications
    • Weld Grinding
    • Weld Removal & Finishing
    • Edge Beveling
    • Flat Areas
    • Blending
    Substrate
    • Stainless Steel
    • Metal
    • Exotic Alloy
    • Aluminum
    • Carbon Steel
    • All Metal
    • Mild Steel
  • Return Policy Description0-6: 0%; 6-12: 15%; >12: no return
    Sales unitEA
    SAP Shelf Life In Days1825
    Target Warehouse Location Lead Time2 days
    SAP External Material Group31191506
  • Base (B) - Billing UnitEA
    Base (B) - Customary Cubic Dimension2.25166 IN3
    Base (B) - Customary Gross Weight0.01386 LB
    Base (B) - Customary Net Weight0.0105 LB
    Base (B) - Metric Net Weight0.004763 KG
    Base (B) - Metric Cubic Dimension36.898 CCM
    Base (B) - Item Quantity1
    Base (B) - UnitEA
  • Consumer (2) - Item Quantity0
  • Inner (3) - Billing UnitEA
    Inner (3) - Customary Cubic Dimension81.28156 IN3
    Inner (3) - Customary Gross Weight0.6111 LB
    Inner (3) - Customary Net Weight0.52512 LB
    Inner (3) - Customary Height Dimension4.5 IN
    Inner (3) - Customary Length Dimension4.25 IN
    Inner (3) - Customary Width Dimension4.25 IN
    Inner (3) - Metric Weight0.277144 KG
    Inner (3) - Metric Net Weight0.23815 KG
    Inner (3) - Metric Cubic Dimension1331.961 CCM
    Inner (3) - Metric Height Dimension11.43 CM
    Inner (3) - Metric Length Dimension10.795 CM
    Inner (3) - Metric Width Dimension10.795 CM
    Inner (3) - Item Quantity50
    Inner (3) - UnitKAR
  • Shipper (6) - Billing UnitEA
    Shipper (6) - Customary Cubic Dimension450.33728 IN3
    Shipper (6) - Customary Gross Weight2.77247 LB
    Shipper (6) - Customary Net Weight2.10048 LB
    Shipper (6) - Customary Height Dimension5.07992 IN
    Shipper (6) - Customary Length Dimension9.70984 IN
    Shipper (6) - Customary Width Dimension9.12992 IN
    Shipper (6) - Metric Weight1.257358 KG
    Shipper (6) - Metric Net Weight0.9526 KG
    Shipper (6) - Metric Cubic Dimension7379.677 CCM
    Shipper (6) - Metric Height Dimension12.903 CM
    Shipper (6) - Metric Length Dimension24.663 CM
    Shipper (6) - Metric Width Dimension23.19 CM
    Shipper (6) - Item Quantity200
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitEA
    Pallet (8) - Customary Cubic Dimension91768.04345 IN3
    Pallet (8) - Customary Gross Weight479.08035 LB
    Pallet (8) - Customary Net Weight336.07728 LB
    Pallet (8) - Customary Height Dimension45.51969 IN
    Pallet (8) - Customary Length Dimension48 IN
    Pallet (8) - Customary Width Dimension42 IN
    Pallet (8) - Metric Weight217.27 KG
    Pallet (8) - Metric Net Weight152.416 KG
    Pallet (8) - Metric Cubic Dimension1503802.928 CCM
    Pallet (8) - Metric Height Dimension115.62 CM
    Pallet (8) - Metric Length Dimension121.92 CM
    Pallet (8) - Metric Width Dimension106.68 CM
    Pallet (8) - Item Quantity32000
    Pallet (8) - UnitPAL