Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 1-1/2 in, 50/Carton, 200 ea/Case
Main PictureDownload

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 1-1/2 in, 50/Carton, 200 ea/Case

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 1-1/2 in, 50/Carton, 200 ea/Case

  • 3M ID7010364509
    SAP ID7010364509
    Legacy SKU61500052461
    Product NumberSC-DS
    Base SKUB40064719
    Keywords3M, Scotch-Brite, Roloc, surface conditioning disc, quick change attachment, non-woven fiber, aluminum oxide, silicon carbide, blending, deburring, finishing, grinding, polishing, radiusing, refining, surface preparation, metalworking, woodworking, abrasives, industrial abrasives, metal fabrication, equipment maintenance, facility maintenance, automotive, collision repair, marine, oil and gas, rail transportation, personal recreation vehicles, commercial vehicles, construction, manufacturing, easy attachment, high cut-rate, low heat retention, durable abrasive, load resistant, consistent finishing, undercutting, gouging, irregular surfaces, contoured surfaces.
    BrandScotch-Brite™
    Global Product HierarchyQuick Change Discs
    Commodity1150 - Surface Conditioning Prod
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00048011132501
    Unit of Use (1) - Article Number00048011132501
    Inner (3) - Article Number30048011132502
    Shipper (6) - Article Number50048011132506
  • Marketplace Formal NameScotch-Brite™ Roloc™ SC Surface Conditioning Disc, SC-DS, A/O Medium, TS, 1-1/2 in, 50/Carton, 200 ea/Case
    Material DescriptionSC-DS A MED 1-1/2in TS 50/200 DC
    Marketplace DescriptionScotch-Brite™ Roloc™ SC Surface Conditioning Discs combine durable, nonwoven disc with the efficiency of the 3M™ Roloc™ quick-change attachment system for an effective disc that cleans, finishes, blends, and deburrs. The nonwoven fiber construction conforms well to help preserve irregular or contoured surfaces and the Roloc™ backing supports the disc for aggressive cutting.
    Marketplace Description ExtendedThe open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. Our 3M™ Roloc™ attachment system offers quick and easy disc change-out, making the Roloc™ SC Surface Conditioning Disc ideal for a range of tasks including blending, deburring, and finishing. We use aluminum oxide abrasive in Scotch-Brite™ Roloc™ SC Surface Conditioning Discs. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. We developed Scotch-Brite™ surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc. 3M™ Roloc™ TR quick change discs are smaller discs that have a plastic threaded button or screw designed to easily and quickly screw onto a Roloc™ TR disc pad (sold separately) so that you can conveniently change discs with a simple twist-off, twist-on motion. The Roloc TR system provides a secure attachment even for heavy-duty applications, and the variety of available 3M™ Roloc™ discs allows swapping from one application to the next in seconds.
    Bullets
    • AVAILABLE IN A RANGE OF GRADES: Choose from Super Fine (SFN), Very Fine (VFN), Medium (MED), and Coarse (CRS) to fit your application needs
    • CHOOSE YOUR MINERAL: Discs are available either powered by super-sharp silicon carbide (SiC) that excels in low-pressure and fine finishing applications or made from harder and more durable aluminum oxide (A/O)
    • CONFORMABLE NONWOVEN WEB: Springy nonwoven fibers resist loading, conform to irregular or contoured surfaces, and minimize undercutting and gouging
    • GREAT FOR LOW-TO-MEDIUM PRESSURE: Built for consistency in blending, cleaning, deburring, finishing, grinding, polishing, radiusing, refining, and surface preparation, depending on the chosen grade
    • QUICK AND EASY ATTACHMENT: Convenient 3M™ Roloc™ Attachment System allows for fast disc changes
    • WORKS ON A RANGE OF METALS: This multipurpose option is great for use on aluminum, mild steel, nickel alloy, stainless steel, and titanium
  • Abrasive MaterialAluminum Oxide
    Application
    • Cleaning
    • Blending
    • Finishing
    • Radiusing
    • Refining
    • Deburring
  • Attachment TypeTS
    Backing MaterialNon-woven
    Backing WeightNon Pertinent
  • Center Hole Thread SizeNon Pertinent
  • GradeMedium
    GritNon Pertinent
  • Maximum Speed30000 rpm
  • Micron GradeNon Pertinent
  • Overall Diameter (Imperial)1.5 in
    Overall Diameter (Metric)38.1 mm
  • Product ColorMaroon
    Product FormDisc
  • Sub Applications
    • Light Deburring
    • General Purpose Sanding
    • Intermediate Sanding
    • Blending
    • Finishing
    • Refining
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    Substrate
    • Nickel Alloy
    • Stainless Steel
    • Aluminum
    • Titanium
    • Mild Steel
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr6805301000
    Return Policy Description0-6: 0%; 6-12: 15%; >12: no return
    Sales unitEA
    SAP Shelf Life In Days1825
    Target Warehouse Location Lead Time2 days
    SAP External Material Group31191506
  • Base (B) - Billing UnitEA
    Base (B) - Customary Cubic Dimension1.125 IN3
    Base (B) - Customary Gross Weight0.0065 LB
    Base (B) - Customary Net Weight0.00639 LB
    Base (B) - Customary Height Dimension0.5 IN
    Base (B) - Customary Length Dimension1.5 IN
    Base (B) - Customary Width Dimension1.5 IN
    Base (B) - Metric Net Weight0.0029 KG
    Base (B) - Metric Cubic Dimension18.435447 CCM
    Base (B) - Metric Height Dimension1.27 CM
    Base (B) - Metric Length Dimension3.81 CM
    Base (B) - Metric Width Dimension3.81 CM
    Base (B) - Previous Packaging Level Quantity0.00
    Base (B) - Item Quantity1
    Base (B) - Total Unit Quantity0.00
    Base (B) - UnitEA
    Base (B) - Pallet Layer Quantity7.00
    Base (B) - Shipping Container Per Layer Quantity20
  • Consumer (2) - Item Quantity0
  • Inner (3) - Billing UnitEA
    Inner (3) - Customary Cubic Dimension97.76774 IN3
    Inner (3) - Customary Gross Weight0.44298 LB
    Inner (3) - Customary Net Weight0.31973 LB
    Inner (3) - Customary Height Dimension3.11024 IN
    Inner (3) - Customary Length Dimension6.14173 IN
    Inner (3) - Customary Width Dimension5.11811 IN
    Inner (3) - Metric Weight0.2009 KG
    Inner (3) - Metric Net Weight0.145 KG
    Inner (3) - Metric Cubic Dimension1602.12 CCM
    Inner (3) - Metric Height Dimension7.9 CM
    Inner (3) - Metric Length Dimension15.6 CM
    Inner (3) - Metric Width Dimension13.0 CM
    Inner (3) - Previous Packaging Level Quantity50.00
    Inner (3) - Previous Packaging Level UnitDISC
    Inner (3) - Item Quantity50
    Inner (3) - Total Unit Quantity50.00
    Inner (3) - Item UnitDISC
    Inner (3) - UnitKAR
  • Shipper (6) - Billing UnitEA
    Shipper (6) - Customary Cubic Dimension517.61726 IN3
    Shipper (6) - Customary Gross Weight2.19331 LB
    Shipper (6) - Customary Net Weight1.2789 LB
    Shipper (6) - Customary Height Dimension5.7874 IN
    Shipper (6) - Customary Length Dimension12.83465 IN
    Shipper (6) - Customary Width Dimension6.9685 IN
    Shipper (6) - Metric Weight0.9947 KG
    Shipper (6) - Metric Net Weight0.58 KG
    Shipper (6) - Metric Cubic Dimension8482.194 CCM
    Shipper (6) - Metric Height Dimension14.7 CM
    Shipper (6) - Metric Length Dimension32.6 CM
    Shipper (6) - Metric Width Dimension17.7 CM
    Shipper (6) - Previous Packaging Level Quantity4.00
    Shipper (6) - Previous Packaging Level UnitCTNS
    Shipper (6) - Item Quantity200
    Shipper (6) - Total Unit Quantity200.00
    Shipper (6) - Item UnitDISC
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitEA
    Pallet (8) - Customary Cubic Dimension88088.36273 IN3
    Pallet (8) - Customary Gross Weight343.98 LB
    Pallet (8) - Customary Net Weight179.046 LB
    Pallet (8) - Customary Height Dimension45.66929 IN
    Pallet (8) - Customary Length Dimension48.0315 IN
    Pallet (8) - Customary Width Dimension40.15748 IN
    Pallet (8) - Metric Weight156.0 KG
    Pallet (8) - Metric Net Weight81.2 KG
    Pallet (8) - Metric Cubic Dimension1443504.0 CCM
    Pallet (8) - Metric Height Dimension116.0 CM
    Pallet (8) - Metric Length Dimension122.0 CM
    Pallet (8) - Metric Width Dimension102.0 CM
    Pallet (8) - Previous Packaging Level Quantity140.00
    Pallet (8) - Previous Packaging Level UnitBOX
    Pallet (8) - Item Quantity28000
    Pallet (8) - Total Unit Quantity28000.00
    Pallet (8) - Item UnitDISC
    Pallet (8) - UnitPAL
    Pallet (8) - Pallet Layer Quantity7.00
    Pallet (8) - Shipping Container Per Layer Quantity20