Main Picture
Scotch-Brite™ EX2 Deburring Wheel, X2-WL, 8A Medium, 12 in x 3 in x 5 in, 1 ea/Case
Scotch-Brite™ EX2 Deburring Wheel, X2-WL, 8A Medium, 12 in x 3 in x 5 in, 1 ea/Case
3M ID 7010365281 SAP ID 7010365281 Legacy SKU 61500159399 Product Number X2-WL Base SKU B40071655 Keywords ex2, deburring wheel, surface conditioner, 3m deburring wheel, abrasive Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011929941 Unit of Use (1) - Article Number 00048011929941 Shipper (6) - Article Number 50048011929946 Marketplace Formal Name Scotch-Brite™ EX2 Deburring Wheel, X2-WL, 8A Medium, 12 in x 3 in x 5 in, 1 ea/Case Material Description X2-WL 8A MED 12 x 3 x 5in 1 WL Marketplace Description Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs. Marketplace Description Extended Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives. Our Scotch-Brite™ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into nonwoven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Minimizes heat build up to lessen impact on heat-sensitive materials
- Resists smearing for cleaner surfaces and less preparation
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
Abrasive Material Aluminum Oxide Application - Finishing
- Polishing
- Deburring
Attachment Type Center Hole Center Hole Diameter (Imperial) 5 in Center Hole Diameter (Metric) 127 mm Density 8 Face Width (Imperial) 3 in Face Width (Metric) 76.2 mm Grade Medium Grit Non Pertinent Maximum Speed 3000 rpm Overall Diameter (Imperial) 12 in Overall Diameter (Metric) 304.8 mm Product Color Gray Product Form Convolute Wheel Sub Applications - Blending
- Flat Finishing
Substrate - Glass
- Composite
ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 20 SAP External Material Group 31191600 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 664.17258 IN3 Base (B) - Customary Gross Weight 8.29962 LB Base (B) - Customary Net Weight 7.73514 LB Base (B) - Metric Net Weight 3.508 KG Base (B) - Metric Cubic Dimension 10883.796 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 664.17258 IN3 Shipper (6) - Customary Gross Weight 8.29962 LB Shipper (6) - Customary Net Weight 7.73514 LB Shipper (6) - Customary Height Dimension 3.9 IN Shipper (6) - Customary Length Dimension 13.1 IN Shipper (6) - Customary Width Dimension 13 IN Shipper (6) - Metric Weight 3.764 KG Shipper (6) - Metric Net Weight 3.508 KG Shipper (6) - Metric Cubic Dimension 10883.796 CCM Shipper (6) - Metric Height Dimension 9.906 CM Shipper (6) - Metric Length Dimension 33.274 CM Shipper (6) - Metric Width Dimension 33.02 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 96324.69744 IN3 Pallet (8) - Customary Gross Weight 853.14537 LB Pallet (8) - Customary Net Weight 765.77886 LB Pallet (8) - Customary Height Dimension 47.77992 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 386.914 KG Pallet (8) - Metric Net Weight 347.292 KG Pallet (8) - Metric Cubic Dimension 1578472.817 CCM Pallet (8) - Metric Height Dimension 121.361 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 99 Pallet (8) - Unit PAL