Main Picture
Scotch-Brite™ Cut and Polish Wheel, CP-WL, 5A Fine, 12 in x 3/4 in x 5 in
Scotch-Brite™ Cut and Polish Wheel, CP-WL, 5A Fine, 12 in x 3/4 in x 5 in
3M ID 7010534360 SAP ID 7010534360 Legacy SKU CY998621528 Product Number CP-WL Base SKU B40071658 Keywords wheel, cut and polish, structural adhesive, aluminum wheels, abrasives Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060711552 Marketplace Formal Name Scotch-Brite™ Cut and Polish Wheel, CP-WL, 5A Fine, 12 in x 3/4 in x 5 in Material Description CP-WL 5A FINE 12 x 3/4 x 5in WL Marketplace Description Scotch-Brite™ Cut and Polish Wheels are built for aggressive blending and finishing applications. Harder than other finishing wheels, Cut and Polish Wheels are good for defect removal or heavy scratch blending and produces a finish with a tight scratch pattern. Marketplace Description Extended Scotch-Brite™ Cut and Polish Wheels use aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys. Our Scotch-Brite™ industrial abrasives are a unique surface conditioning products with abrasives incorporated into nonwoven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Cut and Polish Wheels help to remove surface defects and coarse grindlines, blend forging marks and machining mismatches while leaving a uniform grain finish. Our wheels are available in a range of diameters and widths and can be used with robotics, inline sanders, bench motors, backstands and centerless grinders. Bullets - AGGRESSIVE CUT: Made with Aluminum Oxide mineral for heavy duty blending and finishing
- EFFECTIVE REPLACEMENT: Provides comparable performance and benefits to a rubber bonded wheel
- IDEAL FOR AGGRESSIVE BLENDING AND FINISHING: Designed to deliver superior performance in demanding applications
- LONGER LIFE: Nonwoven web construction helps resist premature loading
Abrasive Material Aluminum Oxide Attachment Type Center Hole Center Hole Diameter (Imperial) 5 in Center Hole Diameter (Metric) 127 mm Face Width (Imperial) 0.75 in Face Width (Metric) 19.05 mm Grade Fine Grit Non Pertinent Overall Diameter (Imperial) 12 in Overall Diameter (Metric) 304.8 mm Product Form Wheel Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 8 SAP External Material Group 31191600 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 108.00043 IN3 Base (B) - Customary Gross Weight 0.25449 LB Base (B) - Customary Net Weight 0.25449 LB Base (B) - Metric Net Weight 0.115417 KG Base (B) - Metric Cubic Dimension 1769.803 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Item Quantity 0 Pallet (8) - Item Quantity 0