Main Picture
Scotch-Brite™ Clean and Finish Sheet, CF-SH 7447, A/O Very Fine, 3 in x 4 in
Scotch-Brite™ Clean and Finish Sheet, CF-SH 7447, A/O Very Fine, 3 in x 4 in
3M ID 7010534378 SAP ID 7010534378 Legacy SKU CY998621700 Product Number CF-SH Base SKU B40071131 Keywords scotch brite sheets, scotch brite material Brand Scotch-Brite™ Global Product Hierarchy Non-woven Sheets & Rolls Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060711712 Unit of Use (1) - Article Number 00638060711712 Marketplace Formal Name Scotch-Brite™ Clean and Finish Sheet, CF-SH 7447, A/O Very Fine, 3 in x 4 in Material Description CF-SH 7447 A VFN 3 x 4in SH Marketplace Description Scotch-Brite™ Clean and Finish Sheet uses a conformable non-woven web and a variety of mineral types to blend, clean, and finish. It also works well for contour finishing and lacquer finishing and polishing. The sheet is flexible, making it effective for getting into hard-to-reach areas to produce a uniform finish. Marketplace Description Extended The soft abrasive mineral effectively cleans, blends, and conditions metals, wood, composites, and advanced surfaces and is also effective for paint prep. Applications where our Scotch-Brite™ Clean and Finish multi-use sheets are useful include cabinetry, custom woodworking and millwork, furniture, metal fabrication, primary wood and panel processing. Washable and reusable, this non-woven, open-web sheet resists loading to continuously provide consistent conditioning properties throughout the life of the product. Convenient 6 x 9 inch sheet may be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander for large area coverage. Scotch-Brite™ Clean and Finish Sheets are available with silicon carbide, aluminum oxide, or talc abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Talc is a mild abrasive that can be used achieve a satin finish or with polish to create a high gloss finish in topcoat rubbing applications. Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - Abrasive mineral adhered to non-woven web are ideal for cleaning, blending, finishing, and light coating and corrosion removal
- Can be folded, stacked, or rolled for effective cleaning or conditioning on flat, irregular, or contoured surfaces
- Can be used with polishing compounds to create a gloss finish on wood
- Conformable pad gets into corners and over contoured surfaces to produce a uniform finish
- Open web construction resists loading and rinses clean for repeated use
Abrasive Material Aluminum Oxide Attachment Type Non Pertinent Grade Very Fine Low Stretch No Overall Length (Imperial) 4 in Overall Length (Metric) 101.6 mm Overall Width (Imperial) 3 in Overall Width (Metric) 76.2 mm Product Form Sheet Sales unit SH SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 15 SAP External Material Group 31191505 Base (B) - Billing Unit SH Base (B) - Customary Cubic Dimension 4.82114 IN3 Base (B) - Customary Gross Weight 0.01134 LB Base (B) - Customary Net Weight 0.01134 LB Base (B) - Metric Net Weight 0.005142 KG Base (B) - Metric Cubic Dimension 79.004 CCM Base (B) - Item Quantity 1 Base (B) - Unit SH Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Item Quantity 0 Pallet (8) - Item Quantity 0