3M™ Cold Shrink QS-III Splice Kit 5515A-750-CU, 15 kV, Standard, 1/case
Main PictureDownload

3M™ Cold Shrink QS-III Splice Kit 5515A-750-CU, 15 kV, Standard, 1/case

3M™ Cold Shrink QS-III Splice Kit 5515A-750-CU, 15 kV, Standard, 1/case

  • 3M ID7100002365
    SAP ID7100002365
    Legacy SKU80611207301
    Part Number5515A-750-CU
    Local Catalog Identifier5515A-750-CU
    Base SKUB5005113028
    Keywords3M, Cold Shrink, QS-III, Inline Shielded Cable Splice Kits, Shielded Cable Splices, 15 kV class, tape shield, wire shield, UniShield, longitudinally corrugated shielded power cables, MV-90, MV-105, copper conductors, aluminum conductors, feeder circuits, distribution circuits, silicone rubber-splice, EPDM rubber jacket, partial discharge, AC reliability, inline compression connectors, crimp type connectors, BIL rating, IEEE 404, cable insulation, Energy market, Data Center market, Electrical Equipment Manufacturing market
    Brand3M™
    Global Product HierarchyCold Shrink Splices
    Commodity2320 - Cable Acc,CS and L&M
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00054007421375
    Unit of Use (1) - Article Number00054007421375
    Shipper (6) - Article Number50054007421370
  • Marketplace Formal Name3M™ Cold Shrink QS-III Splice Kit 5515A-750-CU, 15 kV, Standard, 1/case
    Material Description5515A-750-CU QSIII SPLICE KIT
    Marketplace DescriptionThe 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
    Marketplace Description ExtendedThe cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability. The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
    Bullets
    • Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
    • Factory-tested partial discharge and AC ensure reliability
    • Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
    • Rated for 15 kV class cables
    • Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
    • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
  • ApplicationCable Connection
  • Cable Shielding
    • Longitudinally Corrugated (LC)
    • Tape Shield
    • Wire Shield
    • UniShield®
  • Conductor MaterialCopper
    Conductor Sizes (Imperial)750 kcmil
  • Insulation Outer Diameter (Imperial)
    • 1.04 in
    • 1.05 in
    • 1.06 in
    • 1.07 in
    • 1.08 in
    • 1.09 in
    • 1.1 in
    • 1.11 in
    • 1.12 in
    • 1.13 in
    • 1.14 in
    • 1.15 in
    • 1.16 in
    • 1.17 in
    • 1.18 in
    • 1.19 in
    • 1.2 in
    • 1.21 in
    • 1.22 in
    • 1.23 in
    • 1.24 in
    • 1.25 in
    • 1.26 in
    • 1.27 in
    • 1.28 in
    • 1.29 in
    • 1.3 in
    • 1.31 in
    • 1.32 in
    • 1.33 in
    • 1.34 in
    • 1.35 in
    • 1.36 in
    • 1.37 in
    • 1.38 in
    • 1.39 in
    • 1.4 in
    • 1.41 in
    • 1.42 in
    • 1.43 in
    • 1.44 in
    • 1.45 in
    • 1.46 in
    • 1.47 in
    • 1.48 in
    • 1.49 in
    • 1.5 in
    • 1.51 in
    • 1.52 in
    • 1.53 in
    • 1.54 in
    • 1.55 in
    • 1.56 in
    • 1.57 in
    • 1.58 in
    • 1.59 in
    • 1.6 in
    • 1.61 in
    • 1.62 in
    • 1.63 in
    • 1.64 in
    • 1.65 in
    • 1.66 in
    • 1.67 in
    • 1.68 in
    • 1.69 in
    • 1.7 in
  • MaterialSilicone Rubber
  • Number of Conductors1
  • Splice TypeCold Shrink
  • Voltage15 kV
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr8546900000
    Sales unitKIT
    SAP Shelf Life In Days36
    Target Warehouse Location Lead Time60
    SAP External Material Group39121400
  • Base (B) - Billing UnitKIT
    Base (B) - Customary Cubic Dimension3066.04198 IN3
    Base (B) - Customary Gross Weight8.85749 LB
    Base (B) - Customary Net Weight8.85528 LB
    Base (B) - Customary Height Dimension6.6 IN
    Base (B) - Customary Length Dimension24.45 IN
    Base (B) - Customary Width Dimension19 IN
    Base (B) - Metric Net Weight4.016 KG
    Base (B) - Metric Cubic Dimension50243.23 CCM
    Base (B) - Metric Height Dimension16.764 CM
    Base (B) - Metric Length Dimension62.103 CM
    Base (B) - Metric Width Dimension48.26 CM
    Base (B) - Item Quantity1
    Base (B) - UnitKIT
  • Consumer (2) - Item Quantity0
  • Inner (3) - Item Quantity0
  • Shipper (6) - Billing UnitKIT
    Shipper (6) - Customary Cubic Dimension1629.30372 IN3
    Shipper (6) - Customary Gross Weight10.06142 LB
    Shipper (6) - Customary Net Weight8.85528 LB
    Shipper (6) - Customary Height Dimension8.26772 IN
    Shipper (6) - Customary Length Dimension25.66929 IN
    Shipper (6) - Customary Width Dimension7.67717 IN
    Shipper (6) - Metric Weight4.563 KG
    Shipper (6) - Metric Net Weight4.016 KG
    Shipper (6) - Metric Cubic Dimension26699.4 CCM
    Shipper (6) - Metric Height Dimension21.0 CM
    Shipper (6) - Metric Length Dimension65.2 CM
    Shipper (6) - Metric Width Dimension19.5 CM
    Shipper (6) - Item Quantity1
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitKIT
    Pallet (8) - Customary Cubic Dimension86898.15097 IN3
    Pallet (8) - Customary Gross Weight538.02 LB
    Pallet (8) - Customary Net Weight442.764 LB
    Pallet (8) - Customary Height Dimension43.70079 IN
    Pallet (8) - Customary Length Dimension47.6378 IN
    Pallet (8) - Customary Width Dimension41.73228 IN
    Pallet (8) - Metric Weight244.0 KG
    Pallet (8) - Metric Net Weight200.8 KG
    Pallet (8) - Metric Cubic Dimension1424000.0 CCM
    Pallet (8) - Metric Height Dimension111.0 CM
    Pallet (8) - Metric Length Dimension121.0 CM
    Pallet (8) - Metric Width Dimension106.0 CM
    Pallet (8) - Item Quantity50
    Pallet (8) - UnitPAL