Main Picture
3M™ PPS™ Adapter, 16017, Type 10, 4 per case
3M™ PPS™ Adapter, 16017, Type 10, 4 per case
3M ID 7100003288 SAP ID 7100003288 Legacy SKU 60980107423 Part Number 16017 Local Catalog Identifier 16017 Base SKU B40069933 Keywords - 3m pps, 3m pps adapter, pps, 3m pps cups, 3m pps system, pps system 3m, 3m cup liners, 3m cups, 3m performance spray gun, car paint spraying,
- PPS
Brand PPS™ Global Product Hierarchy Spray Cup System Adapters Commodity 3340 - PAS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051131160170 Consumer (2) - Article Number 00051131160170 Shipper (6) - Article Number 50051131160175 Marketplace Formal Name 3M™ PPS™ Adapter, 16017, Type 10, 4 per case Material Description PN16017 3M ADAPTOR 10 Marketplace Description 3M™ PPS™ Adapter converts paint spray guns for use with the 3M™ PPS™ (Legacy) paint preparation system. Specifically designed adapters allow painters to use PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun. Marketplace Description Extended Adapters for the 3M™ PPS™ (Legacy) System 3M™ PPS™ Adapter converts leading commercial spray guns into ones that can use the 3M™ PPS™ (Legacy) paint preparation system save workers time in the measuring, mixing, and filtering of paint materials. PPS™ is a all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption, reduces solvent usage by up to 70%, and improves the operator’s efficiency by up to 15% between the prep (mixing, measuring, and filtering) and clean-up time (time associated with cleaning the paint reservoir and spray gun). PPS™ System can be Used with Virtually any Spray Gun Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters can also use the 3M™ Accuspray™ replaceable atomizing head spray guns to further reduce solvent use and spray gun cleaning and maintenance time. To use the PPS™ Adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun. Advantages of the 3M™ PPS™System Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, youre ready to start spraying. Your Spray Gun Functions at any Angle, Even Upside Down PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees. Clean Up is a Breeze and Uses Less Solvent After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. A Versatile System that Works with Most Spray Guns Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. Reduces the Chance of Contamination Between Jobs Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 15%. The Bottom Line: Why 3M is the Paint Spray System of Choice 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M™ PPS™ offers many advantages for any one spraying liquid coatings from a spray gun with cup. Bullets - Adapter converts typical spray guns into ones that work with the 3M™ PPS™ (Legacy) paint preparation system
- All-in-one solution reduces chance of outside contamination, delivers consistent material transfer for improved quality and reduced paint consumption
- Available in 3 fl oz, 6 fl oz, 12.5 fl oz, 22 fl oz and 28 fl oz sizes
- PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal/plastic paint cup systems
- PPS™ reduces cleaning solvent consumption by 70 percent
- Specifically designed adapters, allows painters to use the PPS™ with virtually any spray gun
- Stainless steel adapter offers exceptional durability
- Threaded adapter is easy to install
Adapter Type 10 Application - Paint Application
- Adapter
- Primer
- Painting
Inner Diameter (Imperial) 1 in Product Color Silver Product Type Female Adapter Sub Applications Painting Thread Size 1/4"-19 BSP ECCN EAR99 Harmonized Tariff Schedule Nbr 8424909080 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit EA SAP Shelf Life In Days 0 Target Warehouse Location Lead Time 2 days SAP External Material Group 25000000 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 16.40734 IN3 Base (B) - Customary Gross Weight 0.14112 LB Base (B) - Customary Net Weight 0.14112 LB Base (B) - Customary Height Dimension 5.25 IN Base (B) - Customary Length Dimension 1 IN Base (B) - Customary Width Dimension 3.1252 IN Base (B) - Metric Net Weight 0.064 KG Base (B) - Metric Cubic Dimension 268.867 CCM Base (B) - Metric Height Dimension 13.335 CM Base (B) - Metric Length Dimension 2.54 CM Base (B) - Metric Width Dimension 7.938 CM Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit EA Base (B) - Pallet Layer Quantity 7.00 Base (B) - Shipping Container Per Layer Quantity 50 Consumer (2) - Billing Unit EA Consumer (2) - Customary Cubic Dimension 16.40734 IN3 Consumer (2) - Customary Gross Weight 0.14112 LB Consumer (2) - Customary Net Weight 0.14112 LB Consumer (2) - Customary Height Dimension 5.25 IN Consumer (2) - Customary Length Dimension 1 IN Consumer (2) - Customary Width Dimension 3.1252 IN Consumer (2) - Metric Weight 0.064002 KG Consumer (2) - Metric Net Weight 0.064 KG Consumer (2) - Metric Cubic Dimension 268.867 CCM Consumer (2) - Metric Height Dimension 13.335 CM Consumer (2) - Metric Length Dimension 2.54 CM Consumer (2) - Metric Width Dimension 7.938 CM Consumer (2) - Previous Packaging Level Quantity 1.00 Consumer (2) - Item Quantity 1 Consumer (2) - Total Unit Quantity 1.00 Consumer (2) - Item Unit ADAP Consumer (2) - Unit EA Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 178.37505 IN3 Shipper (6) - Customary Gross Weight 0.90015 LB Shipper (6) - Customary Net Weight 0.56448 LB Shipper (6) - Customary Height Dimension 5 IN Shipper (6) - Customary Length Dimension 6.61417 IN Shipper (6) - Customary Width Dimension 5.3937 IN Shipper (6) - Metric Weight 0.408232 KG Shipper (6) - Metric Net Weight 0.256 KG Shipper (6) - Metric Cubic Dimension 2923.032 CCM Shipper (6) - Metric Height Dimension 12.7 CM Shipper (6) - Metric Length Dimension 16.8 CM Shipper (6) - Metric Width Dimension 13.7 CM Shipper (6) - Previous Packaging Level Quantity 4.00 Shipper (6) - Previous Packaging Level Unit BAG Shipper (6) - Item Quantity 4 Shipper (6) - Total Unit Quantity 4.00 Shipper (6) - Item Unit ADAP Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 80429.60884 IN3 Pallet (8) - Customary Gross Weight 343.98 LB Pallet (8) - Customary Net Weight 197.568 LB Pallet (8) - Customary Height Dimension 39.76378 IN Pallet (8) - Customary Length Dimension 48.0315 IN Pallet (8) - Customary Width Dimension 42.12598 IN Pallet (8) - Metric Weight 156.0 KG Pallet (8) - Metric Net Weight 89.6 KG Pallet (8) - Metric Cubic Dimension 1318000.0 CCM Pallet (8) - Metric Height Dimension 101.0 CM Pallet (8) - Metric Length Dimension 122.0 CM Pallet (8) - Metric Width Dimension 107.0 CM Pallet (8) - Previous Packaging Level Quantity 350.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 1400 Pallet (8) - Total Unit Quantity 1400.00 Pallet (8) - Item Unit ADAP Pallet (8) - Unit PAL Pallet (8) - Pallet Layer Quantity 7.00 Pallet (8) - Shipping Container Per Layer Quantity 50