Main Picture
3M™ Cold Shrink Quick Insulator QI 5/16-220, 1 kV, 10/Case
3M™ Cold Shrink Quick Insulator QI 5/16-220, 1 kV, 10/Case
3M ID 7100019552 SAP ID 7100019552 Legacy SKU 80611443500 Part Number QI-5/16-220 Local Catalog Identifier QI-5/16-220 Base SKU B00019994 Keywords Cold Shrink, EPDM rubber insulating sleeve, Cold Shrink rubber insulating sleeve, Cold Shrink Quick Insulators QI Series, Cold Shrink Insulators QI Series, Quick Insulators QI Series, 3M Cold Shrink Insulator, Rubber Insulation, QI Series, Built-in mastic in electrical insulator, electrical insulation range taking Brand 3M™ Global Product Hierarchy Cold Shrink Tubing Commodity 2320 - Cable Acc,CS and L&M Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051128577509 Unit of Use (1) - Article Number 00051128577509 Shipper (6) - Article Number 50051128577504 Marketplace Formal Name 3M™ Cold Shrink Quick Insulator QI 5/16-220, 1 kV, 10/Case Material Description QI-5/16-220 COLD SHRINK INSULATOR Marketplace Description 3M™ Cold Shrink Quick Insulator QI Series consists of open-ended and factory-expanded tubular rubber sleeves that feature sealing mastic on each end loaded on a removable plastic core. To install the connection, position it over the inline connector, pull the loose tab on the plastic core while unwinding the core in a counterclockwise direction, allowing the ends of the tube to shrink and form a secure seal. The core and tube sizing, combined with sealing mastic at each end, allow for a broader application range while preserving the seal and insulation properties of the EPDM rubber tube. Designed for primary insulation of solid dielectric insulated wires and cable splices rated up to 1000 volts, the insulators allow for direct burial or submersible applications. They are easy to install by hand, requiring no additional tools or heating sources. Accommodating a variety of cable sizes, 3M™ Cold Shrink Quick Insulator QI Series provides reliable thermal stability, high chemical resistance, and a water-resistant seal that meets the standard for ANSI C-119.1. These insulators are ideal for dig-in and sheath repairs, inline conductor transition connectors, and secondary splices for both copper and aluminum conductors, withstanding an operating temperature range between -40 °F to 194 °F (-40 °C to 90 °C). When you need dependable insulating properties with long-lasting resiliency and pressure performance, 3M™ Cold Shrink Quick Insulator QI Series is your go-to solution. Marketplace Description Extended 3M has over 40 years of lab-tested and industry-proven results demonstrating the reliability of cold shrink technology. 3M™ Cold Shrink Quick Insulator QI Series and the other products in the cold shrink family are engineered with specially formulated materials that deliver a durable environmental seal and insulation. Five diameter sizes accommodate cables up to 1000 volts, ranging from 8 AWG to 3000 kcmil, for both copper and aluminum conductors with crimped connectors. For applications with high UV exposure or where visual inspection isn't feasible, it is recommended to overwrap the tubing with Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70. Bullets - BUILT STRONG: Made of EPDM rubber, enduring operating temperatures ranging from -40 °F to 194 °F (-40 °C to 90 °C)
- DESIGNED TO PERFORM: Offers reliable primary insulation for solid dielectric wires and secondary splices rated up to 1000 volts
- EASY TO INSTALL: Requires no tools or heating sources and can be installed by hand
- HIGH-RESISTANCE: Provides excellent wet electrical properties and resists water, acids, and alkalis
- LONG-LASTING: Maintains thermal stability, resiliency, and pressure for dependable performance
- MULTIPURPOSE: For dig-in and sheath repairs, inline conductor transition connectors, and secondary splices for both copper and aluminum conductors
- WATER-RESISTANT SEAL: Meets the water-resistant requirements of ANSI C-119.1
- WORK YOUR WAY: Accommodates a variety of cable sizes that can be used in direct burial or submersible applications
Application - Insulation, mechanical protection, repair
- Cable Connection
Cable Shielding Non-shielded Cable Type Power Cable Conductor Material - Copper
- Aluminum
Conductor Sizes (Imperial) - 1 AWG
- 2 AWG
- 2/0 AWG
- 8 AWG
- 6 AWG
- 1/0 AWG
- 4 AWG
Indoor/Outdoor Both Inner Diameter After Shrink (Imperial) 0.2 in Inner Diameter After Shrink (Metric) 5.1 mm Inner Diameter Before Shrink (Imperial) 0.65 in Inner Diameter Before Shrink (Metric) 16.5 mm Material EPDM Rubber Maximum Conductor Size (Imperial) - 2/0 AWG (Copper)
- 1/0 AWG (Aluminum)
Maximum Conductor Size (Metric) - 70 mm² (Copper)
- 50 mm² (Aluminum)
Maximum Operating Temperature (Celsius) 90 °C Maximum Operating Temperature (Fahrenheit) 194 °F Minimum Conductor Size (Imperial) - 8 AWG (Copper)
- 8 AWG (Aluminum)
Minimum Conductor Size (Metric) - 10 mm² (Copper)
- 10 mm² (Aluminum)
Minimum Operating Temperature (Celsius) -40 °C Minimum Operating Temperature (Fahrenheit) -40 °F Model Cold-shrink Product Color Black Product Type Splice Splice Type Cold Shrink Voltage 1 kV ECCN EAR99 Harmonized Tariff Schedule Nbr 8546900000 Sales unit EA SAP Shelf Life In Days 60 Target Warehouse Location Lead Time 60 SAP External Material Group 39120000 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 64.18991 IN3 Base (B) - Customary Gross Weight 0.26505 LB Base (B) - Customary Net Weight 0.26504 LB Base (B) - Customary Height Dimension 2.25 IN Base (B) - Customary Length Dimension 11.65 IN Base (B) - Customary Width Dimension 2.44882 IN Base (B) - Metric Net Weight 0.1202 KG Base (B) - Metric Cubic Dimension 1051.88 CCM Base (B) - Metric Height Dimension 5.715 CM Base (B) - Metric Length Dimension 29.591 CM Base (B) - Metric Width Dimension 6.22 CM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 590.76585 IN3 Shipper (6) - Customary Gross Weight 2.97896 LB Shipper (6) - Customary Net Weight 2.65041 LB Shipper (6) - Customary Height Dimension 5.98425 IN Shipper (6) - Customary Length Dimension 12.99213 IN Shipper (6) - Customary Width Dimension 7.59843 IN Shipper (6) - Metric Weight 1.351 KG Shipper (6) - Metric Net Weight 1.202 KG Shipper (6) - Metric Cubic Dimension 9680.88 CCM Shipper (6) - Metric Height Dimension 15.2 CM Shipper (6) - Metric Length Dimension 33.0 CM Shipper (6) - Metric Width Dimension 19.3 CM Shipper (6) - Item Quantity 10 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 93122.59718 IN3 Pallet (8) - Customary Gross Weight 429.975 LB Pallet (8) - Customary Net Weight 352.50453 LB Pallet (8) - Customary Height Dimension 46.85039 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 195.0 KG Pallet (8) - Metric Net Weight 159.866 KG Pallet (8) - Metric Cubic Dimension 1526000.0 CCM Pallet (8) - Metric Height Dimension 119.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 1330 Pallet (8) - Unit PAL