Main Picture
3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WME, White, 35.5 in x 50 yd, 1 Roll/Case
3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WME, White, 35.5 in x 50 yd, 1 Roll/Case
3M ID 7100043813 SAP ID 7100043813 Legacy SKU 70008928809 Product Number 1577CW-WME Local Catalog Identifier 1577CW-WME Base SKU B40067953 Keywords 3M, VentureClad, insulation jacketing tape, vapor barrier, HVAC, ductwork, vessels, pipes, conformable tape, zero permeability, puncture resistant, tear resistant, indoor, outdoor, cold weather adhesive, fiberglass, polystyrene, conformable aerogel, mold protection, UV protection, weather resistance, oil resistance, grease resistance, chemical resistance, impact resistance, mechanical abuse resistance, corrosion under insulation, LEED v4 compliance, UL723 classified, cold temperature adhesive, high temperature adhesive, flexible backing, easy installation, ASTM E84, self-adhesive, pressure sensitive adhesive, moisture vapor intrusion, FDA compositional requirements, Design & Construction, Manufacturing, Building & Construction, Heavy Industrial, adhesive tape, insulation protection, mechanical insulation, industrial tape, 3M insulation products, vapor barrier tape. Brand VentureClad™ Global Product Hierarchy Aluminum Tapes Commodity 2200 - GTA VEC Venture Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051128965306 Unit of Use (1) - Article Number 00051128965306 Shipper (6) - Article Number 00051128965306 Pallet (8) - Article Number 70051128965305 Marketplace Formal Name 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WME, White, 35.5 in x 50 yd, 1 Roll/Case Material Description 1577CW-WME FC448 WT 35.5INX50YD 1/CV Marketplace Description 3M™ VentureClad™ Insulation Jacketing System 1577CW-WME is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes. This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task. This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel. It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI). This tape qualifies for compliance credit for LEED® v4 and is UL723 classified. 3M™ VentureClad™ Insulation Jacketing System 1577CW-WME provides a reliable barrier and protection during jacketing and cladding operations. Marketplace Description Extended Zero Permeability Cladding and Jacketing The embossed white aluminum exterior provides an attractive aesthetic for cladding that is visible when finished while also providing excellent chemical resistance. It provides zero permeability and acts as a vapor barrier for insulation cladding and jacketing applications. This tape was tested in accordance with ASTM E84. The self-adhesive material cuts and installs easily on-site and without the use of special tools. The backing is flexible to conform to curved and irregular surfaces with ease. 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WME meets or exceeds most building code requirements - for more information on specific approvals, please refer to the technical data sheet. Adheres in Cold Temperatures 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WME features an aggressive pressure sensitive acrylic adhesive that bonds and seals well in cold temperatures. This adhesive adheres immediately on contact to a variety of materials such as fiberglass, faced fiberglass insulation, mineral wool, polystyrene and flexible aerogel. It applies easily at temperatures as cold as -10°F/-23°C. It can operate at a service temperature as low as -94°F/-70°C and as high as 248°F/(120°C). Once bonded, this tape will provide good holding power for extended periods with good aging properties that resists lifting and curling over time. This product is used to protect insulation against UV, ozone, high humidity, salt spray, weather, oil and grease, aggressive chemicals, impact and mechanical abuse, corrosion under insulation (CUI), and moisture vapor intrusion. It also works well with many insulation types Qualifies for compliance credit for LEED®. Additionally, it meets the FDA compositional requirements for indirect food contact. Recommended Applications • Vapor barrier for insulation cladding and jacketing operations such as HVAC ductwork and piping • Interior and exterior ductwork (rectangular/round), pipes (straight runs, bends, intersections), and vessels • Weather protection system in extreme environmental conditions The Science of Better Adhesion from 3M Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life - developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations and all of it goes into each of our industrial tapes and adhesives like 3M™ VentureClad™ Insulation Jacketing Tape 1577CW to help businesses like yours operate faster, better and more efficiently. Bullets - 10-year 3M warranty when applied per 3M installation guidelines
- Cold weather acrylic adhesive applies easily at temperatures as cold as -10°F/-23°C
- Easy to cut and install on-site without special tools or application methods
- Flexible backing conforms to irregular and curved surfaces
- High puncture and tear resistance ensure longevity and durability in a variety of applications and environmental conditions
- Qualifies for compliance credit for LEED®
- Zero permeability provides an absolute vapor barrier for sealing applications
Adhesive Type Acrylic Application - Exterior Seams & Joints
- Interior Seams & Joints
- Sealing HVAC & Duct Work
Backing (Carrier) Thickness (Imperial) 6 mil Backing (Carrier) Thickness (Metric) 0.15 mm Backing Material Multi-layered Laminate Maximum Operating Temperature (Celsius) 120 °C Maximum Operating Temperature (Fahrenheit) 248 °F Minimum Operating Temperature (Celsius) -70 °C Minimum Operating Temperature (Fahrenheit) -94 °F Overall Length (Imperial) 50 yd Overall Length (Metric) 45.7 m Overall Width (Imperial) 35.5 in Overall Width (Metric) 901.7 mm Primary Liner Polycoated Kraft Product Color White Shelf Life 12 Month Tensile Strength (Imperial) 100 lb/in Tensile Strength (Metric) 175 N/100mm Total Tape Thickness without Liner (Imperial) 9 mil Total Tape Thickness without Liner (Metric) 0.23 mm ECCN EAR99 Harmonized Tariff Schedule Nbr 7607205000 Return Policy Description 0-30d:0%;31-180:15%;>180:no return Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 2 days SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 2699.55452 IN3 Base (B) - Customary Gross Weight 43.05704 LB Base (B) - Customary Net Weight 40.00752 LB Base (B) - Metric Net Weight 18.144 KG Base (B) - Metric Cubic Dimension 44237.6 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 2699.55452 IN3 Shipper (6) - Customary Gross Weight 43.05704 LB Shipper (6) - Customary Net Weight 40.00752 LB Shipper (6) - Customary Height Dimension 35.98425 IN Shipper (6) - Customary Length Dimension 8.66142 IN Shipper (6) - Customary Width Dimension 8.66142 IN Shipper (6) - Metric Weight 19.527 KG Shipper (6) - Metric Net Weight 18.144 KG Shipper (6) - Metric Cubic Dimension 44237.6 CCM Shipper (6) - Metric Height Dimension 91.4 CM Shipper (6) - Metric Length Dimension 22.0 CM Shipper (6) - Metric Width Dimension 22.0 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 81405.99256 IN3 Pallet (8) - Customary Gross Weight 895.23 LB Pallet (8) - Customary Net Weight 800.1504 LB Pallet (8) - Customary Height Dimension 40.94488 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 406.0 KG Pallet (8) - Metric Net Weight 362.88 KG Pallet (8) - Metric Cubic Dimension 1334000.0 CCM Pallet (8) - Metric Height Dimension 104.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 20 Pallet (8) - Unit PAL