Main Picture
Scotch-Brite™ Roloc™ Clean and Strip Disc, TR, CSD2-R, 4 in x 1 in S XCS, 10 ea/Case
Scotch-Brite™ Roloc™ Clean and Strip Disc, TR, CSD2-R, 4 in x 1 in S XCS, 10 ea/Case
3M ID 7100062946 SAP ID 7100062946 Legacy SKU 61500070729 Base SKU B40064844 Keywords non woven disc, surface disc, grinding disc Brand Scotch-Brite™ Global Product Hierarchy Quick Change Discs Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011147840 Unit of Use (1) - Article Number 00048011147840 Shipper (6) - Article Number 50048011147845 Marketplace Formal Name Scotch-Brite™ Roloc™ Clean and Strip Disc, TR, CSD2-R, 4 in x 1 in S XCS, 10 ea/Case Material Description C2-ZR CNS CSD2-R S XCS 4X1 DC Marketplace Description Ideally suited for rust, coating and weld discoloration removal the Scotch-Brite™ Roloc™ Clean and Strip Disc is a long-lasting abrasive that combines silicon carbide mineral with non-woven nylon fibers. This unique disc can aggressively clean without significantly altering the base material. Marketplace Description Extended Roloc™ Attachment for Swift Disc Changes The Scotch-Brite™ Roloc™ Clean and Strip Disc binds silicon carbide mineral and non-woven nylon fibers using resin. Resin dissolves and breaks down over time, helping the abrasive stay strong and resist heat. With the convenience of the Roloc™ attachment system, disc change-out for multi-step finishing processes is both quick and easy. The disc swiftly mounts to a holder pad (sold separately) which, subsequently attaches to abrasive tools like die grinders and right angle disc sanders. Silicon Carbide Mineral The Scotch-Brite™ Roloc™ Clean and Strip Disc uses silicon carbide, because it's a very sharp synthetic mineral that is commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and blemishes from a variety of substrates. It aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other difficult-to-reach areas. The Many Benefits of Open Web Abrasives Nonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part Bullets - Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a fine finish without gouging the workpiece
- Load resistant material resists clogging for consistent cutting action
- Quickly removes paint and rust without compromising the geometry of the workpiece.
- Roloc™ attachment system provides easy disc change out for multi-step finishing processes
- Smear resistant properties avoid extra cleaning of the work surface
Abrasive Material Silicon Carbide Application Surface Preparation Attachment Type TR Backing Weight Non Pertinent Center Hole Diameter (Imperial) 1 in Center Hole Diameter (Metric) 25.4 mm Center Hole Thread Size Non Pertinent Grade Extra Coarse Grit Non Pertinent Maximum Speed 8000 rpm Micron Grade Non Pertinent Overall Diameter (Imperial) 4 in Overall Diameter (Metric) 101.6 mm Product Form Disc Sub Applications - Paint Removal
- Sealant Removal
- Paint Stripping
- Coating Removal
- Rust Removal
Substrate All Metal ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 2 days SAP External Material Group 31191506 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 1.60001 IN3 Base (B) - Customary Gross Weight 0.25004 LB Base (B) - Customary Net Weight 0.15232 LB Base (B) - Customary Height Dimension 0.1 IN Base (B) - Customary Length Dimension 4 IN Base (B) - Customary Width Dimension 4 IN Base (B) - Metric Net Weight 0.06908 KG Base (B) - Metric Cubic Dimension 26.219302 CCM Base (B) - Metric Height Dimension 0.254 CM Base (B) - Metric Length Dimension 10.16 CM Base (B) - Metric Width Dimension 10.16 CM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 355.23281 IN3 Shipper (6) - Customary Gross Weight 2.50025 LB Shipper (6) - Customary Net Weight 1.52321 LB Shipper (6) - Customary Height Dimension 5.19685 IN Shipper (6) - Customary Length Dimension 8.26772 IN Shipper (6) - Customary Width Dimension 8.26772 IN Shipper (6) - Metric Weight 1.1339 KG Shipper (6) - Metric Net Weight 0.6908 KG Shipper (6) - Metric Cubic Dimension 5821.2 CCM Shipper (6) - Metric Height Dimension 13.2 CM Shipper (6) - Metric Length Dimension 21.0 CM Shipper (6) - Metric Width Dimension 21.0 CM Shipper (6) - Item Quantity 10 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 93915.90895 IN3 Pallet (8) - Customary Gross Weight 529.2 LB Pallet (8) - Customary Net Weight 304.6428 LB Pallet (8) - Customary Height Dimension 47.24409 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 240.0 KG Pallet (8) - Metric Net Weight 138.16 KG Pallet (8) - Metric Cubic Dimension 1539000.0 CCM Pallet (8) - Metric Height Dimension 120.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 2000 Pallet (8) - Unit PAL