Main Picture
Scotch-Brite™ EX2 Deburring Wheel, X2-WL, 8S Fine, 8 in x 1/2 in x 3 in, 4 ea/Case
Scotch-Brite™ EX2 Deburring Wheel, X2-WL, 8S Fine, 8 in x 1/2 in x 3 in, 4 ea/Case
3M ID 7100089708 SAP ID 7100089708 Legacy SKU 61500127040 Product Number X2-WL Base SKU B40071655 Keywords ex2, deburring wheel, surface conditioner, 3m deburring wheel, abrasive Brand Scotch-Brite™ Global Product Hierarchy Deburring & Finishing Wheels Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00048011174259 Unit of Use (1) - Article Number 00048011174259 Shipper (6) - Article Number 50048011174254 Marketplace Formal Name Scotch-Brite™ EX2 Deburring Wheel, X2-WL, 8S Fine, 8 in x 1/2 in x 3 in, 4 ea/Case Material Description X2-WL 8S FINE 8 x 1/2 x 3in 4 WL Marketplace Description Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs. Marketplace Description Extended Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives. Our Scotch-Brite™ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into nonwoven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Minimizes heat build up to lessen impact on heat-sensitive materials
- Resists smearing for cleaner surfaces and less preparation
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
Abrasive Material Silicon Carbide Application - Finishing
- Polishing
- Deburring
Attachment Type Center Hole Center Hole Diameter (Imperial) 3 in Center Hole Diameter (Metric) 76.2 mm Density 8 Face Width (Imperial) 0.5 in Face Width (Metric) 12.7 mm Grade Fine Grit Non Pertinent Maximum Speed 4500 rpm Overall Diameter (Imperial) 8 in Overall Diameter (Metric) 203.2 mm Product Color Gray Product Form Convolute Wheel Sub Applications - Blending
- Flat Finishing
Substrate - Glass
- Composite
ECCN EAR99 Harmonized Tariff Schedule Nbr 6805301000 Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 8 SAP External Material Group 31191600 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 48.00018 IN3 Base (B) - Customary Gross Weight 0.63611 LB Base (B) - Customary Net Weight 0.63008 LB Base (B) - Customary Height Dimension 8 IN Base (B) - Customary Length Dimension 0.75 IN Base (B) - Customary Width Dimension 8 IN Base (B) - Metric Net Weight 0.28575 KG Base (B) - Metric Cubic Dimension 786.579 CCM Base (B) - Metric Height Dimension 20.32 CM Base (B) - Metric Length Dimension 1.905 CM Base (B) - Metric Width Dimension 20.32 CM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 180.19223 IN3 Shipper (6) - Customary Gross Weight 2.72979 LB Shipper (6) - Customary Net Weight 2.52032 LB Shipper (6) - Customary Height Dimension 2.48031 IN Shipper (6) - Customary Length Dimension 8.58268 IN Shipper (6) - Customary Width Dimension 8.46457 IN Shipper (6) - Metric Weight 1.238 KG Shipper (6) - Metric Net Weight 1.143 KG Shipper (6) - Metric Cubic Dimension 2952.81 CCM Shipper (6) - Metric Height Dimension 6.3 CM Shipper (6) - Metric Length Dimension 21.8 CM Shipper (6) - Metric Width Dimension 21.5 CM Shipper (6) - Item Quantity 4 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 93915.90895 IN3 Pallet (8) - Customary Gross Weight 963.585 LB Pallet (8) - Customary Net Weight 856.9071 LB Pallet (8) - Customary Height Dimension 47.24409 IN Pallet (8) - Customary Length Dimension 47.6378 IN Pallet (8) - Customary Width Dimension 41.73228 IN Pallet (8) - Metric Weight 437.0 KG Pallet (8) - Metric Net Weight 388.62 KG Pallet (8) - Metric Cubic Dimension 1539000.0 CCM Pallet (8) - Metric Height Dimension 120.0 CM Pallet (8) - Metric Length Dimension 121.0 CM Pallet (8) - Metric Width Dimension 106.0 CM Pallet (8) - Item Quantity 1360 Pallet (8) - Unit PAL