Main Picture
3M™ Accuspray™ ONE Replacement Spray Gun, 16579, 4 per case
3M™ Accuspray™ ONE Replacement Spray Gun, 16579, 4 per case
3M ID 7100096183 SAP ID 7100096183 Legacy SKU 60455080964 Part Number 16579 Local Catalog Identifier 16579 Base SKU B40069849 Replaced by Material ID 7100228104 Keywords - 3m pps, 3m pps adapter, pps, 3m pps cups, 3m pps system, pps system 3m, 3m cup liners, 3m cups, 3m performance spray gun, car paint spraying,
- PPS
Brand Accuspray™ Global Product Hierarchy Spray Guns Commodity 3340 - PAS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051131165793 Consumer (2) - Article Number 00051131165793 Shipper (6) - Article Number 50051131165798 Marketplace Formal Name 3M™ Accuspray™ ONE Replacement Spray Gun, 16579, 4 per case Material Description 16579, ONE Repl Spray Gun, Black, 4/CV Marketplace Description The 3M™ Accuspray™ ONE Spray Gun delivers fundamental improvements in the application of auto paint and other fluids. A lightweight, 1-piece composite spray gun body contains no gaskets or seals, eliminating the need for maintenance kits. The gun accepts a range of Accuspray™ replaceable atomizing heads for a system affording the performance of a new gun, on demand and at a fraction of the cost. Marketplace Description Extended Easy Cleanup. No Maintenance Kits. A Tremendous Range of Uses. We asked: “If you could have the perfect spray gun, what would it be like?” The result was our 3M™ Accuspray™ ONE Spray Gun. It’s the only HVLP spray gun that allows for professional-grade application of paint, primer and other fluids with virtually no cleaning and no maintenance kits. This spray gun features a lightweight, composite body that is molded in one piece, eliminating the complexity, wear and cleaning of small parts and pieces like gaskets, seals and O-rings. Convenient, easily-operated controls for fan diameter, fluid and air pressure allow for quick adjustment across jobs from spot repairs to full panel coverage. In fact, this spray gun can handle jobs requiring up to 12” vertical or horizontal spray patterns with very little overspray - one gun for a complete range of applications. A Spray System That Pays Off Our Accuspray™ ONE Spray Gun is a central part of our 3M™ Accuspray™ System for automotive collision repair. It effortlessly accepts replaceable atomizing heads - transparent nozzles that can be reused 5-10 times and then simply removed and replaced. Replaceable atomizing heads are clear so it’s easy to see when the head is clean, and the spray guns perform like new every time the atomizing head is replaced - the equivalent of a new spray gun, at a fraction of the cost. The benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. The end result: cleaner, more productive, more profitable collision repair operations. Accuspray™ and Our PPS™ System The 3M™ Paint Preparation System is an all-in-one closed system for mixing/measuring, filtering, temporary storage and for spraying in any direction, including upside down, for consistent coverage and improved material usage. This system eliminates the inefficient process of mixing paint and other materials separately and transferring them through filters and other equipment where product gets left behind, unused. Instead, paint and other materials are mixed and sprayed out of the same cup with a PPS™ liner, lid and built-in filter. You simply place a disposable liner within a re-usable paint cup. Then mix the paint in the PPS™ liner, snap the disposable lid (with built-in filter) in place and attach the locking collar to complete the PPS™ System. With just a snap and quick quarter-turn, the assembly easily to the spray gun body. Once you’re finished spraying, simply remove the liner from the cup and discard it. It’s that simple. There’s no need to spend on the extra mixing cups, filters and strainers. And each PPS™ cup doubles as a temporary container for leftover material - just snap in the included sealing plug to help protect mixed paints, primers and sealants, and save even further on material costs. All of this adds up to a very clear cost savings across your operation. This system lets painters mix less paint, drastically reduce their solvent use, and spend less time cleaning spray guns and cups. All told, the PPS™ system can improve operator efficiency by as much as 15%, and can save up to 70% on solvent usage alone. The Science of Better Spray Systems from 3M We put decades of scientific and real-life study into our 3M™ Accuspray™ ONE Spray Gun to help make spray application easier and save collision repair and other professionals time and money at every step. Every feature - from the lightweight composite spray gun body that eliminates maintenance kits to its easy-to-operate controls and varied spray patterns - is another example of what 3M does best: Science. Applied to Life.™ Bullets - Durable, lightweight 1-piece composite spray gun body contains no gaskets, seals or O-rings, eliminating maintenance kits
- Easily-operated controls allow for up to 12” vertical or horizontal spray pattern
- Replacement Accuspray™ spray gun body saves equipment costs
- Works with PPS™ system for all-in-one mixing, filtering, spraying and temporary fluid protection, saving costs (up to 70% on solvent usage alone)
- Works with replaceable atomizing heads for a full range of fluids, from primers to clear coat
Air Consumption (Imperial) 13 scfm Air Consumption (Metric) 368.16 L/min Application - Paint Application
- Coating spraying
- Manual Spray Coating
- Coating Application
- Spraying
- Painting
Operating Pressure (Imperial) 24 psi Operating Pressure (Metric) 1.65 BAR Product Color Black Sub Applications Painting ECCN EAR99 Harmonized Tariff Schedule Nbr 8424209000 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit KIT SAP Shelf Life In Days 0 Target Warehouse Location Lead Time 2 days SAP External Material Group 25000000 Base (B) - Billing Unit KIT Base (B) - Customary Cubic Dimension 255.05584 IN3 Base (B) - Customary Gross Weight 1.54791 LB Base (B) - Customary Net Weight 1.54791 LB Base (B) - Customary Height Dimension 2.8752 IN Base (B) - Customary Length Dimension 10.75 IN Base (B) - Customary Width Dimension 8.25197 IN Base (B) - Metric Net Weight 0.702 KG Base (B) - Metric Cubic Dimension 4179.6 CCM Base (B) - Metric Height Dimension 7.303 CM Base (B) - Metric Length Dimension 27.305 CM Base (B) - Metric Width Dimension 20.96 CM Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit KIT Base (B) - Pallet Layer Quantity 3.00 Base (B) - Shipping Container Per Layer Quantity 18 Consumer (2) - Billing Unit KIT Consumer (2) - Customary Cubic Dimension 255.05584 IN3 Consumer (2) - Customary Gross Weight 1.54791 LB Consumer (2) - Customary Net Weight 1.54791 LB Consumer (2) - Customary Height Dimension 2.8752 IN Consumer (2) - Customary Length Dimension 10.75 IN Consumer (2) - Customary Width Dimension 8.25197 IN Consumer (2) - Metric Weight 0.702 KG Consumer (2) - Metric Net Weight 0.702 KG Consumer (2) - Metric Cubic Dimension 4179.6 CCM Consumer (2) - Metric Height Dimension 7.303 CM Consumer (2) - Metric Length Dimension 27.305 CM Consumer (2) - Metric Width Dimension 20.96 CM Consumer (2) - Previous Packaging Level Quantity 1.00 Consumer (2) - Item Quantity 1 Consumer (2) - Total Unit Quantity 1.00 Consumer (2) - Item Unit KIT Consumer (2) - Unit KIT Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit KIT Shipper (6) - Customary Cubic Dimension 1230.47355 IN3 Shipper (6) - Customary Gross Weight 6.74951 LB Shipper (6) - Customary Net Weight 6.19164 LB Shipper (6) - Customary Height Dimension 12.5 IN Shipper (6) - Customary Length Dimension 11.25 IN Shipper (6) - Customary Width Dimension 8.75 IN Shipper (6) - Metric Weight 3.061 KG Shipper (6) - Metric Net Weight 2.808 KG Shipper (6) - Metric Cubic Dimension 20163.77 CCM Shipper (6) - Metric Height Dimension 31.75 CM Shipper (6) - Metric Length Dimension 28.575 CM Shipper (6) - Metric Width Dimension 22.225 CM Shipper (6) - Previous Packaging Level Quantity 4.00 Shipper (6) - Previous Packaging Level Unit KIT Shipper (6) - Item Quantity 4 Shipper (6) - Total Unit Quantity 4.00 Shipper (6) - Item Unit KIT Shipper (6) - Unit CS Pallet (8) - Billing Unit KIT Pallet (8) - Customary Cubic Dimension 81344.96857 IN3 Pallet (8) - Customary Gross Weight 400.06859 LB Pallet (8) - Customary Net Weight 334.34856 LB Pallet (8) - Customary Height Dimension 42.37992 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 40 IN Pallet (8) - Metric Weight 181.437 KG Pallet (8) - Metric Net Weight 151.632 KG Pallet (8) - Metric Cubic Dimension 1333000.0 CCM Pallet (8) - Metric Height Dimension 107.645 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 101.6 CM Pallet (8) - Previous Packaging Level Quantity 54.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 216 Pallet (8) - Total Unit Quantity 216.00 Pallet (8) - Item Unit KIT Pallet (8) - Unit PAL Pallet (8) - Pallet Layer Quantity 3.00 Pallet (8) - Shipping Container Per Layer Quantity 18