Main Picture
3M™ PPS™ Series 2.0 Lid 26205, Midi/Mini/Micro, 125 Micron Filter, 25 Lids/Pack, 1 Pack/Case
3M™ PPS™ Series 2.0 Lid 26205, Midi/Mini/Micro, 125 Micron Filter, 25 Lids/Pack, 1 Pack/Case
3M ID 7100135625 SAP ID 7100135625 Legacy SKU 60455003636 Part Number 26205 Local Catalog Identifier 26205 Base SKU B40072445 Keywords - 3m pps, 3m pps adapter, pps, 3m pps cups, 3m pps system, pps system 3m, 3m cup liners, 3m cups, 3m performance spray gun, car paint spraying,
- PPS
Brand PPS™ Global Product Hierarchy Lids & Liners Commodity 3340 - PAS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051131262058 Unit of Use (1) - Article Number 00051131262058 Shipper (6) - Article Number 00051131262058 Pallet (8) - Article Number 70051131262057 Marketplace Formal Name 3M™ PPS™ Series 2.0 Lid 26205, Midi/Mini/Micro, 125 Micron Filter, 25 Lids/Pack, 1 Pack/Case Material Description 26205, PPS 2.0 Lids,Midi/Mini/Micro,125u Marketplace Description 3M™ PPS™ Series 2.0 Lids are designed for the next generation 3M™ PPS™ Series 2.0 Spray Cup System. A ¼-turn locking system replaces a separate collar, letting you attach the lid to the hard cup with a quick twist. A domed design allows up to 90 ml (3 oz) of fluid below the filter, reducing inconsistent spray and sputter. Full-diameter filters and a wider fluid spout improve flow and filtration. Marketplace Description Extended Use 3M™ PPS™ Series 2.0 Lids wtih the 3M™ PPS™ Series 2.0 Spray Cup System Kit for efficient paint, primer or coating spray applications. PPS™ Series 2.0 Lids lock onto cups with a quarter-turn, without the need for a separate collar. 3M™ PPS™ Series 2.0 Lids are integral to delivering added benefits in paint application and shop efficiency. Each lid features a domed geometry that allows up to 90 ml (3 oz) of material to be held below the filter during on-demand spraying. 3M™ PPS™ Series 2.0 Lids also feature a wider fluid spout for improved flow, and the built-in 125 or 200 micron filter extends the full diameter of the lid for the highest quality filtration and consistency from start to finish. Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. The 3M™ PPS™ Series 2.0 Spray Cup System offers a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. Bullets - Adapter provides four points of connection to lid for stability and total confidence
- Designed specifically for the 3M™ PPS™ Series 2.0 Spray Cup System
- Domed design and wide spout allow up to 90 ml (3oz) to be held below the filter, reducing inconsistent spray due to air-entrapment and sputter
- Features ¼-turn lid locking system, helping eliminate cross-threading and paint build-up
- Full-diameter filters built into every lid maximize filtration and fluid flow
- Large sealing plugs provide stable base – place cup upside down to keep filters wet during temporary sealing and protection
Application - Paint Application
- Primer spraying
- Clear Coat
- Spraying paint
- Paint Preparation
Cup Size - Midi
- Mini
- Micro
Filter Micron Rating 125 micron Product Type Lid Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit PAK SAP Shelf Life In Days 0 Target Warehouse Location Lead Time 2 days SAP External Material Group 25000000 Base (B) - Billing Unit PAK Base (B) - Customary Cubic Dimension 616.41478 IN3 Base (B) - Customary Gross Weight 1.00107 LB Base (B) - Customary Net Weight 1.00107 LB Base (B) - Customary Height Dimension 6.5 IN Base (B) - Customary Length Dimension 10.25 IN Base (B) - Customary Width Dimension 9.25197 IN Base (B) - Metric Net Weight 0.454 KG Base (B) - Metric Cubic Dimension 10101.189 CCM Base (B) - Metric Height Dimension 16.51 CM Base (B) - Metric Length Dimension 26.035 CM Base (B) - Metric Width Dimension 23.5 CM Base (B) - Item Quantity 1 Base (B) - Unit PAK Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit PAK Shipper (6) - Customary Cubic Dimension 616.28364 IN3 Shipper (6) - Customary Gross Weight 1.40724 LB Shipper (6) - Customary Net Weight 1.00017 LB Shipper (6) - Customary Height Dimension 6.5 IN Shipper (6) - Customary Length Dimension 10.25 IN Shipper (6) - Customary Width Dimension 9.25 IN Shipper (6) - Metric Weight 0.638204 KG Shipper (6) - Metric Net Weight 0.453592 KG Shipper (6) - Metric Cubic Dimension 10099.04 CCM Shipper (6) - Metric Height Dimension 16.51 CM Shipper (6) - Metric Length Dimension 26.035 CM Shipper (6) - Metric Width Dimension 23.495 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit PAK Pallet (8) - Customary Cubic Dimension 88484.77452 IN3 Pallet (8) - Customary Gross Weight 203.03475 LB Pallet (8) - Customary Net Weight 120.02044 LB Pallet (8) - Customary Height Dimension 43.87992 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 92.07925 KG Pallet (8) - Metric Net Weight 54.43104 KG Pallet (8) - Metric Cubic Dimension 1450000.0 CCM Pallet (8) - Metric Height Dimension 111.455 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 120 Pallet (8) - Unit PAL