Main Picture
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810NS, White, Part A, 20 Liter (Pail), Drum
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810NS, White, Part A, 20 Liter (Pail), Drum
3M ID 7100160337 SAP ID 7100160337 Legacy SKU 62289987315 Part Number 810NS Product Number 810NS Local Catalog Identifier 810NS Base SKU B40066492 Keywords 3M, Scotch-Weld, Low Odor Acrylic Adhesive, DP810NS, two-part adhesive, room-temperature curing, bonds oily metals, bonds plastics, non-sag adhesive, high shear strength, high peel strength, impact resistance adhesive, safer work environment, non-flammable adhesive, quick work life, quick handling strength, minimal surface prep, durable bonds, metering mixing dispensing, substrate adhesion, UL 746C, electrical equipment adhesive, acrylic glue, fast cure speed, automotive adhesive, commercial solutions adhesive, electronics adhesive, energy adhesive, manufacturing adhesive, transportation adhesive, appliance adhesive, bonding assembly, building maintenance repair, consumer electronics, defense adhesive, electrical construction repair, equipment facility maintenance, graphics signage, industrial abrasives, metal fabrication, interior marine adhesive, metalworking, oil gas, personal recreation vehicles, rail adhesive, retail branding, rig maintenance, woodworking adhesive. Brand Scotch-Weld™ Global Product Hierarchy Two Part Structural Adhesives Commodity 1620 - Structural Adhesives Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 50638060141101 Shipper (6) - Article Number 50638060141101 Marketplace Formal Name 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810NS, White, Part A, 20 Liter (Pail), Drum Material Description 810NS LOW ODOR ACRYL WT PT A 20 L DRUM Marketplace Description 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is a non-sag, toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810NS contributes to a safer work environment compared to typical acrylic adhesives. Marketplace Description Extended When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Provides High Shear and Peel Strength and is Toughened for Impact Resistance This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.</p> Recommended Applications Sporting goods (metal to metal, metal to plastic bonding) Appliance manufacturing (metal to metal, metal to glass) Electronic casing assembly 10 Minute Work Life and 20 Minute Handling Strength With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment. Easy Adhesion with Acrylic Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. Acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life. Bullets - 10 minute work life and 20 minute handling strength
- Bonds most plastics, composites and metals
- Bonds oily metals with minimal surface prep
- Delivers non-sag formulation so adhesive stays where applied
- Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
- Provides high shear and peel strength and is toughened for impact resistance
Adhesive Type Acrylic Application Impact Resistance Container Size (Imperial) 5.28 Gallon Container Size (Metric) 20 l Features Low Odor Full Cure Time 8 hr - 24 hr Performance Level Best Substrate - Plastic: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon)
- Composite Panel
- Glass
- Metal
- Stone
- High Surface Energy, (400-1100 Dynes/cm)
- Plastic (ABS, PVC, Acrylic)
- Plastic (High Performance Nylon)
- Rubber (Except EPDM)
- Wood
- Ceramic
Surface Type - Powder Coated
- Painted
- Unpainted
- Smooth
- Oily
Return Policy Description No Return Sales unit DR SAP Shelf Life In Days 182 Target Warehouse Location Lead Time 34 SAP External Material Group 31200000 Base (B) - Billing Unit DR Base (B) - Customary Cubic Dimension 2545.6662 IN3 Base (B) - Customary Gross Weight 43.50745 LB Base (B) - Customary Net Weight 39.01337 LB Base (B) - Customary Height Dimension 14.5 IN Base (B) - Customary Length Dimension 13.25 IN Base (B) - Customary Width Dimension 13.25 IN Base (B) - Metric Net Weight 17.69314 KG Base (B) - Metric Cubic Dimension 41715.832 CCM Base (B) - Metric Height Dimension 36.83 CM Base (B) - Metric Length Dimension 33.655 CM Base (B) - Metric Width Dimension 33.655 CM Base (B) - Item Quantity 1 Base (B) - Unit DR Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit DR Shipper (6) - Customary Cubic Dimension 2545.6662 IN3 Shipper (6) - Customary Gross Weight 43.50745 LB Shipper (6) - Customary Net Weight 39.01337 LB Shipper (6) - Customary Height Dimension 14.5 IN Shipper (6) - Customary Length Dimension 13.25 IN Shipper (6) - Customary Width Dimension 13.25 IN Shipper (6) - Metric Weight 19.73127 KG Shipper (6) - Metric Net Weight 17.69314 KG Shipper (6) - Metric Cubic Dimension 41715.832 CCM Shipper (6) - Metric Height Dimension 36.83 CM Shipper (6) - Metric Length Dimension 33.655 CM Shipper (6) - Metric Width Dimension 33.655 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit DR Pallet (8) - Billing Unit DR Pallet (8) - Customary Cubic Dimension 98797.82755 IN3 Pallet (8) - Customary Gross Weight 1596.27227 LB Pallet (8) - Customary Net Weight 1404.48137 LB Pallet (8) - Customary Height Dimension 49 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 723.933 KG Pallet (8) - Metric Net Weight 636.953 KG Pallet (8) - Metric Cubic Dimension 1619000.0 CCM Pallet (8) - Metric Height Dimension 124.46 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 36 Pallet (8) - Unit PAL