Main Picture
3M™ PPS™ Series 2.0 Universal Shaker Core, 26458, 12 per case
3M™ PPS™ Series 2.0 Universal Shaker Core, 26458, 12 per case
3M ID 7100161512 SAP ID 7100161512 Legacy SKU 60455091425 Part Number 26458 Local Catalog Identifier 26458 Base SKU B5005006043 Keywords - 3m pps, 3m pps adapter, pps, 3m pps cups, 3m pps system, pps system 3m, 3m cup liners, 3m cups, 3m performance spray gun, car paint spraying,
- PPS
Brand PPS™ Global Product Hierarchy Cups & Collars Commodity 3340 - PAS Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051131264588 Consumer (2) - Article Number 00051131264588 Shipper (6) - Article Number 50051131264583 Marketplace Formal Name 3M™ PPS™ Series 2.0 Universal Shaker Core, 26458, 12 per case Material Description 26458, PPS 2.0 Shaker Core, 12/CV Marketplace Description 3M™ PPS™ Series 2.0 Universal Shaker Core fits on top of the domed 3M™ PPS™ 2.0 Lid and fits into the ¼-turn lid locking system, creating a stable, durable and even surface for clamping PPS™ 2.0 hard cups tightly into paint shakers. Marketplace Description Extended Designed for Using 3M™ PPS™ Series 2.0 Hard Cups in Paint ShakersExcellent for using 3M™ PPS™ Series 2.0 in shops where mixing in paint shakers is common, our 3M™ PPS™ Series 2.0 Universal Shaker Core is designed specifically to work with PPS™ 2.0 Lids and reusable hard cups. Shaker cores are designed to fit on top of domed lids and to fit into the ¼-turn lid locking system, forming a tight fit to the cup and a reliable hold during the shaking process. The double-sided design works with all sizes of 3M™ PPS™ Series 2.0 hard cups. When the paint shaker is activated, the shaker core absorbs and distributes the force from the shaker through the clamps. Each side of the core makes an even and very reliable surface for clamping, and to help prevent the cup from tipping during temporary sealing and protection of paint materials. This simple tool provides extra peace of mind during paint shaking and can result in longer life for reusable PPS™ Series 2.0 hard paint cups. Next Generation of the 3M™ PPS™ Paint Preparation System The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. Cleanest Disposable Cup System Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible. Reduce Material Waste by Mixing in the Cup3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting. Improved Fluid Flow for More Consistent Paint ApplicationOur 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed. More Confidence in the Connection to Your GunA new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids. A System for Both Solvent-Based and Waterborne ProductsEvery lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size. Use the Right Size Cup for Every RepairOur PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing. Reduce Solvent Usage by up to 70%After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent. Your Spray Gun Functions at any Angle, Even Upside DownBecause PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. Reduces the Chance of Contamination Between JobsBecause the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. The Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ system has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. Bullets - Absorbs and distributes force from shaker for longer equipment life
- Double-sided design works with all PPS™ Series 2.0 hard cup sizes
- Excellent for shops where paint shakers are used
- Fits with ¼-turn lid locking system for tight, reliable hold
- Forms durable clamping surface when placing PPS™ Series 2.0 hard cups in paint shakers
Application Mixing Product Type Shaker Core ECCN EAR99 Harmonized Tariff Schedule Nbr 8424909080 Return Policy Description 0-6: 0%; 6-12: 15%; >12: no return Sales unit EA SAP Shelf Life In Days 0 Target Warehouse Location Lead Time 2 days SAP External Material Group 25000000 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 43.7542 IN3 Base (B) - Customary Gross Weight 0.14902 LB Base (B) - Customary Net Weight 0.10102 LB Base (B) - Customary Height Dimension 5 IN Base (B) - Customary Length Dimension 5 IN Base (B) - Customary Width Dimension 1.75 IN Base (B) - Metric Net Weight 0.045812 KG Base (B) - Metric Cubic Dimension 717.0 CCM Base (B) - Metric Height Dimension 12.7 CM Base (B) - Metric Length Dimension 12.7 CM Base (B) - Metric Width Dimension 4.445 CM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Billing Unit EA Consumer (2) - Customary Cubic Dimension 43.7542 IN3 Consumer (2) - Customary Gross Weight 0.14902 LB Consumer (2) - Customary Net Weight 0.10102 LB Consumer (2) - Customary Height Dimension 5 IN Consumer (2) - Customary Length Dimension 5 IN Consumer (2) - Customary Width Dimension 1.75 IN Consumer (2) - Metric Weight 0.067585 KG Consumer (2) - Metric Net Weight 0.045812 KG Consumer (2) - Metric Cubic Dimension 717.0 CCM Consumer (2) - Metric Height Dimension 12.7 CM Consumer (2) - Metric Length Dimension 12.7 CM Consumer (2) - Metric Width Dimension 4.445 CM Consumer (2) - Item Quantity 1 Consumer (2) - Unit EA Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 685.03509 IN3 Shipper (6) - Customary Gross Weight 2.20038 LB Shipper (6) - Customary Net Weight 1.21219 LB Shipper (6) - Customary Height Dimension 5.75 IN Shipper (6) - Customary Length Dimension 15.6248 IN Shipper (6) - Customary Width Dimension 7.6248 IN Shipper (6) - Metric Weight 0.997903 KG Shipper (6) - Metric Net Weight 0.549744 KG Shipper (6) - Metric Cubic Dimension 11225.67 CCM Shipper (6) - Metric Height Dimension 14.605 CM Shipper (6) - Metric Length Dimension 39.687 CM Shipper (6) - Metric Width Dimension 19.367 CM Shipper (6) - Item Quantity 12 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 90925.73381 IN3 Pallet (8) - Customary Gross Weight 266.0456 LB Pallet (8) - Customary Net Weight 127.27948 LB Pallet (8) - Customary Height Dimension 45.12992 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 120.6556 KG Pallet (8) - Metric Net Weight 57.72312 KG Pallet (8) - Metric Cubic Dimension 1490000.0 CCM Pallet (8) - Metric Height Dimension 114.63 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 1260 Pallet (8) - Unit PAL