3M™ Cold Shrink QS-III Splice Kit 5516A-750-AL, 15 kV, Standard, 1/case
Main PictureDownload

3M™ Cold Shrink QS-III Splice Kit 5516A-750-AL, 15 kV, Standard, 1/case

3M™ Cold Shrink QS-III Splice Kit 5516A-750-AL, 15 kV, Standard, 1/case

  • 3M ID7100164796
    SAP ID7100164796
    Legacy SKU80611207335
    Part Number5516A-750-AL
    Local Catalog Identifier5516A-750-AL
    Base SKUB5005113028
    Keywords3M, Cold Shrink, QS-III, Inline Shielded Cable Splice Kits, Shielded Cable Splices, 15 kV class, tape shield, wire shield, UniShield, longitudinally corrugated shielded power cables, MV-90, MV-105, copper conductors, aluminum conductors, feeder circuits, distribution circuits, silicone rubber-splice, EPDM rubber jacket, partial discharge, AC reliability, inline compression connectors, crimp type connectors, BIL rating, IEEE 404, cable insulation, Energy market, Data Center market, Electrical Equipment Manufacturing market
    Brand3M™
    Global Product HierarchyCold Shrink Splices
    Commodity2320 - Cable Acc,CS and L&M
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00054007432548
    Unit of Use (1) - Article Number00054007432548
    Shipper (6) - Article Number50054007432543
  • Marketplace Formal Name3M™ Cold Shrink QS-III Splice Kit 5516A-750-AL, 15 kV, Standard, 1/case
    Material Description5516A-750-AL QSIII SPLICE KIT
    Marketplace DescriptionThe 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
    Marketplace Description ExtendedThe cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability. The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
    Bullets
    • Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
    • Factory-tested partial discharge and AC ensure reliability
    • Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
    • Rated for 15 kV class cables
    • Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
    • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
  • ApplicationCable Connection
  • Cable Shielding
    • Longitudinally Corrugated (LC)
    • Tape Shield
    • Wire Shield
    • UniShield®
  • Conductor MaterialAluminum
    Conductor Sizes (Imperial)750 kcmil
  • Insulation Outer Diameter (Imperial)
    • 1.08 in
    • 1.09 in
    • 1.1 in
    • 1.11 in
    • 1.12 in
    • 1.13 in
    • 1.14 in
    • 1.15 in
    • 1.16 in
    • 1.17 in
    • 1.18 in
    • 1.19 in
    • 1.2 in
    • 1.21 in
    • 1.22 in
    • 1.23 in
    • 1.24 in
    • 1.25 in
    • 1.26 in
    • 1.27 in
    • 1.28 in
    • 1.29 in
    • 1.3 in
    • 1.31 in
    • 1.32 in
    • 1.33 in
    • 1.34 in
    • 1.35 in
    • 1.36 in
    • 1.37 in
    • 1.38 in
    • 1.39 in
    • 1.4 in
    • 1.41 in
    • 1.42 in
    • 1.43 in
    • 1.44 in
    • 1.45 in
    • 1.46 in
    • 1.47 in
    • 1.48 in
    • 1.49 in
    • 1.5 in
    • 1.51 in
    • 1.52 in
    • 1.53 in
    • 1.54 in
    • 1.55 in
    • 1.56 in
    • 1.57 in
    • 1.58 in
    • 1.59 in
    • 1.6 in
    • 1.61 in
    • 1.62 in
    • 1.63 in
    • 1.64 in
    • 1.65 in
    • 1.66 in
    • 1.67 in
    • 1.68 in
    • 1.69 in
    • 1.7 in
  • MaterialSilicone Rubber
  • Number of Conductors1
  • Splice TypeCold Shrink
  • Voltage15 kV
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr8546900000
    Sales unitKIT
    SAP Shelf Life In Days36
    Target Warehouse Location Lead Time60
    SAP External Material Group26121600
  • Base (B) - Billing UnitKIT
    Base (B) - Customary Cubic Dimension1642.49344 IN3
    Base (B) - Customary Gross Weight10.4517 LB
    Base (B) - Customary Net Weight9.47048 LB
    Base (B) - Metric Net Weight4.295 KG
    Base (B) - Metric Cubic Dimension26915.54 CCM
    Base (B) - Item Quantity1
    Base (B) - UnitKIT
  • Consumer (2) - Item Quantity0
  • Inner (3) - Item Quantity0
  • Shipper (6) - Billing UnitKIT
    Shipper (6) - Customary Cubic Dimension1642.49344 IN3
    Shipper (6) - Customary Gross Weight10.4517 LB
    Shipper (6) - Customary Net Weight9.47048 LB
    Shipper (6) - Customary Height Dimension8.3 IN
    Shipper (6) - Customary Length Dimension25.7 IN
    Shipper (6) - Customary Width Dimension7.7 IN
    Shipper (6) - Metric Weight4.74 KG
    Shipper (6) - Metric Net Weight4.295 KG
    Shipper (6) - Metric Cubic Dimension26915.54 CCM
    Shipper (6) - Metric Height Dimension21.082 CM
    Shipper (6) - Metric Length Dimension65.278 CM
    Shipper (6) - Metric Width Dimension19.558 CM
    Shipper (6) - Item Quantity1
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitKIT
    Pallet (8) - Customary Cubic Dimension93502.28645 IN3
    Pallet (8) - Customary Gross Weight558.09432 LB
    Pallet (8) - Customary Net Weight473.52375 LB
    Pallet (8) - Customary Height Dimension46.37992 IN
    Pallet (8) - Customary Length Dimension48 IN
    Pallet (8) - Customary Width Dimension42 IN
    Pallet (8) - Metric Weight253.104 KG
    Pallet (8) - Metric Net Weight214.75 KG
    Pallet (8) - Metric Cubic Dimension1532221.968 CCM
    Pallet (8) - Metric Height Dimension117.805 CM
    Pallet (8) - Metric Length Dimension121.92 CM
    Pallet (8) - Metric Width Dimension106.68 CM
    Pallet (8) - Item Quantity50
    Pallet (8) - UnitPAL