Main Picture
3M™ Cold Shrink QS-III Splice Kit 5513A-2/0-AL, 15 kV, Standard, 1/case
3M™ Cold Shrink QS-III Splice Kit 5513A-2/0-AL, 15 kV, Standard, 1/case
3M ID 7100164860 SAP ID 7100164860 Legacy SKU 80611217979 Part Number 5513A-2/0-AL Local Catalog Identifier 5513A-2/0-AL Base SKU B5005113028 Keywords 3M, Cold Shrink, QS-III, Inline Shielded Cable Splice Kits, Shielded Cable Splices, 15 kV class, tape shield, wire shield, UniShield, longitudinally corrugated shielded power cables, MV-90, MV-105, copper conductors, aluminum conductors, feeder circuits, distribution circuits, silicone rubber-splice, EPDM rubber jacket, partial discharge, AC reliability, inline compression connectors, crimp type connectors, BIL rating, IEEE 404, cable insulation, Energy market, Data Center market, Electrical Equipment Manufacturing market Brand 3M™ Global Product Hierarchy Cold Shrink Splices Commodity 2320 - Cable Acc,CS and L&M Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00051128534878 Unit of Use (1) - Article Number 00051128534878 Shipper (6) - Article Number 50051128534873 Marketplace Formal Name 3M™ Cold Shrink QS-III Splice Kit 5513A-2/0-AL, 15 kV, Standard, 1/case Material Description 5513A-2/0-AL QSIII SPLICE KIT Marketplace Description The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²). Marketplace Description Extended The cold shrink splice body is a one-piece molded design made of special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability. The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D. Bullets - Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Factory-tested partial discharge and AC ensure reliability
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Rated for 15 kV class cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
Application Cable Connection Cable Shielding - Longitudinally Corrugated (LC)
- Tape Shield
- Wire Shield
- UniShield®
Conductor Material Aluminum Conductor Sizes (Imperial) 2/0 AWG Insulation Outer Diameter (Imperial) - 0.64 in
- 0.65 in
- 0.66 in
- 0.67 in
- 0.68 in
- 0.69 in
- 0.7 in
- 0.71 in
- 0.72 in
- 0.73 in
- 0.74 in
- 0.75 in
- 0.76 in
- 0.77 in
- 0.78 in
- 0.79 in
- 0.8 in
- 0.81 in
- 0.82 in
- 0.83 in
- 0.84 in
- 0.85 in
- 0.86 in
- 0.87 in
- 0.88 in
- 0.89 in
- 0.9 in
- 0.91 in
- 0.92 in
- 0.93 in
- 0.94 in
- 0.95 in
- 0.96 in
- 0.97 in
- 0.98 in
- 0.99 in
- 1 in
- 1.01 in
Material Silicone Rubber Number of Conductors 1 Splice Type Cold Shrink Voltage 15 kV ECCN EAR99 Harmonized Tariff Schedule Nbr 8546900000 Sales unit KIT SAP Shelf Life In Days 36 Target Warehouse Location Lead Time 60 SAP External Material Group 26121600 Base (B) - Billing Unit KIT Base (B) - Customary Cubic Dimension 1642.49344 IN3 Base (B) - Customary Gross Weight 9.70166 LB Base (B) - Customary Net Weight 8.72299 LB Base (B) - Metric Net Weight 3.956005 KG Base (B) - Metric Cubic Dimension 26915.54 CCM Base (B) - Item Quantity 1 Base (B) - Unit KIT Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit KIT Shipper (6) - Customary Cubic Dimension 1642.49344 IN3 Shipper (6) - Customary Gross Weight 9.70166 LB Shipper (6) - Customary Net Weight 8.72299 LB Shipper (6) - Customary Height Dimension 8.3 IN Shipper (6) - Customary Length Dimension 25.7 IN Shipper (6) - Customary Width Dimension 7.7 IN Shipper (6) - Metric Weight 4.399845 KG Shipper (6) - Metric Net Weight 3.956005 KG Shipper (6) - Metric Cubic Dimension 26915.54 CCM Shipper (6) - Metric Height Dimension 21.082 CM Shipper (6) - Metric Length Dimension 65.278 CM Shipper (6) - Metric Width Dimension 19.558 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit KIT Pallet (8) - Customary Cubic Dimension 94752.37005 IN3 Pallet (8) - Customary Gross Weight 520.08894 LB Pallet (8) - Customary Net Weight 436.149 LB Pallet (8) - Customary Height Dimension 47 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 235.868 KG Pallet (8) - Metric Net Weight 197.8 KG Pallet (8) - Metric Cubic Dimension 1552707.088 CCM Pallet (8) - Metric Height Dimension 119.38 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 50 Pallet (8) - Unit PAL