Main Picture
3M™ Cold Shrink QS-III Splice Kit 5535A-350-AL, 350 kcmil, 1/case
3M™ Cold Shrink QS-III Splice Kit 5535A-350-AL, 350 kcmil, 1/case
3M ID 7100164916 SAP ID 7100164916 Legacy SKU 80611232051 Part Number 5535A-350-AL Local Catalog Identifier 5535A-350-AL Base SKU B5005113030 Keywords 3M, Cold Shrink, QS-III, Inline Shielded Cable Splice Kits, Cable Splice, Electrical Splice, Shielded Power Cables, High Voltage Splice, Silicone Rubber, EPDM Rubber, Tape Shield, Wire Shield, UniShield, Longitudinally Corrugated Shield, Direct Burial, Submerged Installations, Electrical Stress Reduction, Feeder Circuits, Distribution Circuits, Size Transition Splicing, Production Tested, Reliability, Electric Cable, Copper Connectors, Aluminum Connectors, IEEE 404, Electrical Equipment, Energy Market, Data Center, Electrical Equipment Manufacturing Brand 3M™ Global Product Hierarchy Cold Shrink Splices Commodity 2320 - Cable Acc,CS and L&M Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00054007045915 Unit of Use (1) - Article Number 00054007045915 Shipper (6) - Article Number 50054007045910 Marketplace Formal Name 3M™ Cold Shrink QS-III Splice Kit 5535A-350-AL, 350 kcmil, 1/case Material Description 5535A-350-AL QSIII SPLICE KIT Marketplace Description 3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Marketplace Description Extended Each splice is high-voltage production tested to ensure reliability. The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 250 kV (equal to a 46 kV voltage class). The 3M™ Cold Shrink QS-III Splices 5535A and 5536A meet or exceed the 35 kV Voltage Class rating requirements of IEEE 404. Kits can be ordered with connectors packed in the kit, or the kit and connector can be ordered as separate items. Each kit makes one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D. Bullets - Designed for inline splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations
- High-voltage, production-tested for partial discharge and AC ensure reliability
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Rated for 35 kV cables
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
Cable Shielding - Longitudinally Corrugated (LC)
- Tape Shield
- Wire Shield
- UniShield®
Conductor Material Aluminum Conductor Sizes (Imperial) 350 kcmil Insulation Outer Diameter (Imperial) - 1.07 in
- 1.08 in
- 1.09 in
- 1.1 in
- 1.11 in
- 1.12 in
- 1.13 in
- 1.14 in
- 1.15 in
- 1.16 in
- 1.17 in
- 1.18 in
- 1.19 in
- 1.2 in
- 1.21 in
- 1.22 in
- 1.23 in
- 1.24 in
- 1.25 in
- 1.26 in
- 1.27 in
- 1.28 in
- 1.29 in
- 1.3 in
- 1.31 in
- 1.32 in
- 1.33 in
- 1.34 in
- 1.35 in
- 1.36 in
- 1.37 in
- 1.38 in
- 1.39 in
- 1.4 in
- 1.41 in
- 1.42 in
- 1.43 in
- 1.44 in
- 1.45 in
- 1.46 in
- 1.47 in
- 1.48 in
- 1.49 in
- 1.5 in
- 1.51 in
- 1.52 in
- 1.53 in
- 1.54 in
- 1.55 in
- 1.56 in
- 1.57 in
- 1.58 in
- 1.59 in
- 1.6 in
- 1.61 in
- 1.62 in
- 1.63 in
- 1.64 in
- 1.65 in
- 1.66 in
- 1.67 in
- 1.68 in
- 1.69 in
- 1.7 in
Material Silicone Rubber Number of Conductors 1 Splice Type Cold Shrink Voltage 35 kV ECCN EAR99 Harmonized Tariff Schedule Nbr 8546900000 Sales unit KIT SAP Shelf Life In Days 36 Target Warehouse Location Lead Time 60 SAP External Material Group 26121600 Base (B) - Billing Unit KIT Base (B) - Customary Cubic Dimension 1642.49344 IN3 Base (B) - Customary Gross Weight 10.11173 LB Base (B) - Customary Net Weight 9.60664 LB Base (B) - Metric Net Weight 4.356754 KG Base (B) - Metric Cubic Dimension 26915.54 CCM Base (B) - Item Quantity 1 Base (B) - Unit KIT Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit KIT Shipper (6) - Customary Cubic Dimension 1642.49344 IN3 Shipper (6) - Customary Gross Weight 10.11173 LB Shipper (6) - Customary Net Weight 9.60664 LB Shipper (6) - Customary Height Dimension 8.3 IN Shipper (6) - Customary Length Dimension 25.7 IN Shipper (6) - Customary Width Dimension 7.7 IN Shipper (6) - Metric Weight 4.585818 KG Shipper (6) - Metric Net Weight 4.356754 KG Shipper (6) - Metric Cubic Dimension 26915.54 CCM Shipper (6) - Metric Height Dimension 21.082 CM Shipper (6) - Metric Length Dimension 65.278 CM Shipper (6) - Metric Width Dimension 19.558 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit KIT Pallet (8) - Customary Cubic Dimension 94752.37005 IN3 Pallet (8) - Customary Gross Weight 541.09157 LB Pallet (8) - Customary Net Weight 480.33279 LB Pallet (8) - Customary Height Dimension 47 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 245.393 KG Pallet (8) - Metric Net Weight 217.838 KG Pallet (8) - Metric Cubic Dimension 1552707.088 CCM Pallet (8) - Metric Height Dimension 119.38 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 50 Pallet (8) - Unit PAL