3M™ Cold Shrink Quick Splice Low Voltage QSLV-M-UF, Non-shielded, 1 kV, 10/Case
Main Picture

3M™ Cold Shrink Quick Splice Low Voltage QSLV-M-UF, Non-shielded, 1 kV, 10/Case

3M™ Cold Shrink Quick Splice Low Voltage QSLV-M-UF, Non-shielded, 1 kV, 10/Case

  • 3M ID7100165408
    SAP ID7100165408
    Legacy SKU80611605488
    Part NumberQSLV-M-UF
    Local Catalog IdentifierQSLV-M-UF
    Base SKUB00013992
    Keywords3M cold shrink, cold shrink quick splice, low voltage splice, QSLV-M, cold splice low voltage, three-core cold shrink, water-resistant sealing, centre core splice, connector mechanical protection splice
    Brand3M™
    Global Product HierarchyCold Shrink Splices
    Commodity2320 - Cable Acc,CS and L&M
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00051128602867
    Consumer (2) - Article Number00051128602867
    Shipper (6) - Article Number50051128602862
  • Marketplace Formal Name3M™ Cold Shrink Quick Splice Low Voltage QSLV-M-UF, Non-shielded, 1 kV, 10/Case
    Material DescriptionQSLV-M-UF COLD SHRINK INSULATOR
    Marketplace Description3M™ Cold Shrink Quick Splice Low Voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded and assembled onto a unique three-core system.
    Marketplace Description ExtendedTwo cores, one on each end, are removed from the 3M™ Cold Shrink Quick Splice Low Voltage QSLV-M insulator once it has been centered over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. The third, center segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while also making core removal easy. Diameter sizes cover a range of 1 kV or less cable from 8 AWG through 1000 kcmil for copper and 8 AWG through 500 kcmil for aluminum conductors with crimped connectors. In aerial applications where intense UV radiation will be common and visual inspection is not possible, it is recommended to overwrap the tubing with Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70. Note: Insulator may be used on cable sizes outside of the recommended range provided both cables are within the insulation O.D. range, and the connector meets the dimensional requirements shown in the table.
    Bullets
    • Environmental sealing for communication and other non-electrical applications
    • Factory-expanded for easy installation
    • For direct-bury, secondary low-voltage, non-shielded cable splices
    • Offers excellent wet electrical properties and resists water, acids and alkalis
    • Open-ended tubular sleeves with a sealing mastic on each end for range taking and water resistant tight seal
    • Rated for up to 1 kV applications
    • RoHS 2011/65/EU Compliant and ANSI Certified
    • Simple installation which requires no tools
    • Sleeve is made of EPDM rubber which contains no chlorides nor sulfur, sealing mastic provides a water-resistant sealing
    • Splices both aluminum and copper conductors
    • The third, center segment of the core remains inside the cold shrink tube, acting as a support structure
    • Withstands temperatures of -40°C to 90°C (-40 °F to 194°F)
  • Cable ShieldingNon-shielded
  • Conductor Material
    • Copper
    • Aluminum
  • Indoor/OutdoorBoth
  • Insulation Outer Diameter (Imperial)
    • 0.2 in
    • 0.21 in
    • 0.22 in
    • 0.23 in
    • 0.24 in
    • 0.25 in
    • 0.26 in
    • 0.27 in
    • 0.28 in
    • 0.29 in
    • 0.3 in
    • 0.31 in
    • 0.32 in
    • 0.33 in
    • 0.34 in
    • 0.35 in
    • 0.36 in
    • 0.37 in
    • 0.38 in
    • 0.39 in
    • 0.4 in
    • 0.41 in
    • 0.42 in
    • 0.43 in
    • 0.44 in
    • 0.45 in
    • 0.46 in
    • 0.47 in
    • 0.48 in
    • 0.49 in
    • 0.5 in
    • 0.51 in
    • 0.52 in
    • 0.53 in
    • 0.54 in
    • 0.55 in
    • 0.56 in
    • 0.57 in
    • 0.58 in
    • 0.59 in
    • 0.6 in
    • 0.61 in
    • 0.62 in
    • 0.63 in
    • 0.64 in
    • 0.65 in
    • 0.66 in
    • 0.67 in
    • 0.68 in
    • 0.69 in
    • 0.7 in
    • 0.71 in
    • 0.72 in
    • 0.73 in
    • 0.74 in
    • 0.75 in
    Insulation Outer Diameter (Metric)
    • 10.16 mm
    • 10.414 mm
    • 10.668 mm
    • 10.922 mm
    • 11.176 mm
    • 11.43 mm
    • 11.684 mm
    • 11.938 mm
    • 12.192 mm
    • 12.446 mm
    • 12.7 mm
    • 12.954 mm
    • 13.208 mm
    • 13.462 mm
    • 13.716 mm
    • 13.97 mm
    • 14.224 mm
    • 14.478 mm
    • 14.732 mm
    • 14.986 mm
    • 15.24 mm
    • 15.494 mm
    • 15.748 mm
    • 16.002 mm
    • 16.256 mm
    • 16.51 mm
    • 16.764 mm
    • 17.018 mm
    • 17.272 mm
    • 17.526 mm
    • 17.78 mm
    • 18.034 mm
    • 18.288 mm
    • 18.542 mm
    • 18.796 mm
    • 19.05 mm
    • 5.08 mm
    • 5.334 mm
    • 5.588 mm
    • 5.842 mm
    • 6.096 mm
    • 6.35 mm
    • 6.604 mm
    • 6.858 mm
    • 7.112 mm
    • 7.366 mm
    • 7.62 mm
    • 7.874 mm
    • 8.128 mm
    • 8.382 mm
    • 8.636 mm
    • 8.89 mm
    • 9.144 mm
    • 9.398 mm
    • 9.652 mm
    • 9.906 mm
  • ModelCold Shrink
  • Product ColorBlack
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr8546900000
    Sales unitEA
    SAP Shelf Life In Days60
    Target Warehouse Location Lead Time60
    SAP External Material Group39120000
  • Base (B) - Billing UnitEA
    Base (B) - Customary Cubic Dimension90.00037 IN3
    Base (B) - Customary Gross Weight0.64011 LB
    Base (B) - Customary Net Weight0.5733 LB
    Base (B) - Customary Height Dimension0.5 IN
    Base (B) - Customary Length Dimension9 IN
    Base (B) - Customary Width Dimension20 IN
    Base (B) - Metric Net Weight0.26 KG
    Base (B) - Metric Cubic Dimension1474.836 CCM
    Base (B) - Metric Height Dimension1.27 CM
    Base (B) - Metric Length Dimension22.86 CM
    Base (B) - Metric Width Dimension50.8 CM
    Base (B) - Item Quantity1
    Base (B) - UnitEA
  • Consumer (2) - Billing UnitEA
    Consumer (2) - Customary Cubic Dimension90.00037 IN3
    Consumer (2) - Customary Gross Weight0.64011 LB
    Consumer (2) - Customary Net Weight0.5733 LB
    Consumer (2) - Customary Height Dimension0.5 IN
    Consumer (2) - Customary Length Dimension9 IN
    Consumer (2) - Customary Width Dimension20 IN
    Consumer (2) - Metric Weight0.290299 KG
    Consumer (2) - Metric Net Weight0.26 KG
    Consumer (2) - Metric Cubic Dimension1474.836 CCM
    Consumer (2) - Metric Height Dimension1.27 CM
    Consumer (2) - Metric Length Dimension22.86 CM
    Consumer (2) - Metric Width Dimension50.8 CM
    Consumer (2) - Item Quantity1
    Consumer (2) - UnitEA
  • Inner (3) - Item Quantity0
  • Shipper (6) - Billing UnitEA
    Shipper (6) - Customary Cubic Dimension1310.13407 IN3
    Shipper (6) - Customary Gross Weight6.39891 LB
    Shipper (6) - Customary Net Weight5.733 LB
    Shipper (6) - Customary Height Dimension6.7 IN
    Shipper (6) - Customary Length Dimension16.45984 IN
    Shipper (6) - Customary Width Dimension11.87992 IN
    Shipper (6) - Metric Weight2.902 KG
    Shipper (6) - Metric Net Weight2.6 KG
    Shipper (6) - Metric Cubic Dimension21469.167 CCM
    Shipper (6) - Metric Height Dimension17.018 CM
    Shipper (6) - Metric Length Dimension41.808 CM
    Shipper (6) - Metric Width Dimension30.175 CM
    Shipper (6) - Item Quantity10
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitEA
    Pallet (8) - Customary Cubic Dimension90881.47617 IN3
    Pallet (8) - Customary Gross Weight377.055 LB
    Pallet (8) - Customary Net Weight309.582 LB
    Pallet (8) - Customary Height Dimension45.07992 IN
    Pallet (8) - Customary Length Dimension48 IN
    Pallet (8) - Customary Width Dimension42 IN
    Pallet (8) - Metric Weight171.0 KG
    Pallet (8) - Metric Net Weight140.4 KG
    Pallet (8) - Metric Cubic Dimension1489274.75 CCM
    Pallet (8) - Metric Height Dimension114.503 CM
    Pallet (8) - Metric Length Dimension121.92 CM
    Pallet (8) - Metric Width Dimension106.68 CM
    Pallet (8) - Item Quantity540
    Pallet (8) - UnitPAL