Main Picture
3M™ Venture Tape™ Aluminum Foil Tape 1521CW, Silver, 61 in x 180 yd, 2.8 mil, 1 Roll/Case
3M™ Venture Tape™ Aluminum Foil Tape 1521CW, Silver, 61 in x 180 yd, 2.8 mil, 1 Roll/Case
3M ID 7100166474 SAP ID 7100166474 Legacy SKU 70007519013 Product Number 1521CW Local Catalog Identifier 1521CW Base SKU B40067902 Keywords 3M, 3M Venture Tape, aluminum foil tape, cold weather adhesive, heat shielding tape, light-reflecting tape, masking and sealing tape, duct tape, fibrous ductwork tape, sheet metal duct tape, pressure-sensitive tape, hand tearable tape, durable tape, UL723 flame smoke rating, CAN\/ULC S102 classification, high-strength aluminum backing, puncture resistant tape, tear-resistant tape, flexible backing tape, curved surfaces tape, environmental conditions tape, vapor seal tape, fiberglass insulation tape, mineral wool insulation tape, seam sealing tape, joint sealing tape, cold weather applications tape, weather resistance tape, mold resistance tape, UV resistance tape, extreme environmental conditions tape, thermal insulation tape, aging properties tape, anti-lifting tape, anti-curling tape, marine tape, aerospace tape, automotive tape, commercial vehicles tape Brand Venture Tape™ Global Product Hierarchy Aluminum Tapes Commodity 2200 - GTA VEC Venture Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060144251 Unit of Use (1) - Article Number 00638060144251 Shipper (6) - Article Number 00638060144251 Marketplace Formal Name 3M™ Venture Tape™ Aluminum Foil Tape 1521CW, Silver, 61 in x 180 yd, 2.8 mil, 1 Roll/Case Material Description 1521CW 1.4ML ALUM FOIL 61INX180YD 1/CV Marketplace Description 3M™ Venture Tape™ Aluminum Foil Tape 1521CW is a conformable, 2.8 mil tape that is suitable for masking and sealing in general-purpose heat shielding and light-reflecting applications. Coated with cold-weather acrylic adhesive, this durable tape performs well in a wide range of environmental conditions, and bonds and seals at temperatures as low as -10 °F (-23 °C). It is backed by foil that allows it to easily conform to irregular surfaces and on fibrous and sheet metal ductwork. This pressure-sensitive tape is hand tearable and adheres quickly without special application methods or additional tools. It maintains its form without lifting or curling, even after an extended period of time. This tape meets the UL723 flame/smoke rating, as well as the CAN/ULC S102 classification flame/smoke rating. For optimal performance in cold environments, 3M™ Venture Tape™ Aluminum Foil Tape 1521CW provides a durable bond in various masking and sealing operations. Marketplace Description Extended High-Strength Performance 3M™ Venture Tape™ Aluminum Foil Tape 1521CW is a 1.4 mil, high-strength, dead soft aluminum foil tape that excels in demanding temperatures and humidity applications. This tape offers superior resistance to weathering, mold, UV and extreme environmental conditions. A dead soft aluminum backing conforms around corners and to curved and irregular surfaces with ease. It is an ideal choice for applications on fibrous and sheet metal ductwork. The tape is hand tearable and installs easily, eliminating the need for additional tools or application methods. 3M™ Venture Tape™ Aluminum Foil Tape 1521CW is UL723 classified (10/10 5/10 Flame/Smoke Rating) [UL file #R10984]. It is U.S. Coast Guard Approved (CGA #164.112/63/0). Recommended Applications • Vapor seal for reinforced fiberglass and mineral wool thermal insulation • Seam and joint sealing on sheet metal and fibrous ductwork Excels in Demanding Temperature and Humidity Applications 3M™ Venture Tape™ Aluminum Foil Tape 1521CW is coated with a pressure sensitive cold weather solvent acrylic adhesive specifically designed for cold weather applications. This adhesive performs well in both demanding temperature and humidity applications. It adheres immediately on contact to a variety of materials, including fibrous and sheet metal ducts. With a service temperature ranging from -40°F/-40°C to 250°F/121°C, this tape can be applied in a variety of environmental conditions. Once bonded, it will provide good holding power for extended periods with good aging properties that resists lifting and curling. 3M™ Metal Foil Tapes Aluminum is just one of the metal-backed tapes available from 3M. Our foil tapes resist failure from common sources of degradation including moisture, ultraviolet rays and many chemicals, and are commonly used for reflecting, wrapping, masking, sealing, and more in applications from air ducts to washing machines. As with all 3M products, our 3M™ Venture Tape™ Aluminum Foil Tape 1521CW is supported by exclusive 3M technical expertise and application advice. 3M Aluminum foil tapes are suitable for demanding applications in construction, aerospace, automotive, appliance, maintenance, repair and operations and many more segments. They are also thermally conductive for heating/cooling efficiency. Bringing Better Ideas to the Surface through Science and Innovation In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently. Bullets - Cold weather acrylic adhesive applies easily at temperatures well below freezing
- Flexible backing conforms well to curved or irregular surfaces
- Hand tearable and easy to install on site without special tools or application methods
- High puncture and tear resistance ensures long life and durability in a variety of applications and environments
- High-strength, dead soft aluminum backing is ideal for applications on fibrous and sheet metal ducts
- Specifically designed to perform in cold weather applications
Adhesive Type Acrylic Backing (Carrier) Material Aluminum Foil Backing (Carrier) Thickness (Imperial) 1.4 mil Backing (Carrier) Thickness (Metric) 0.04 mm Backing Material Aluminum Foil Maximum Operating Temperature (Celsius) 121 °C Maximum Operating Temperature (Fahrenheit) 121 °F Minimum Operating Temperature (Celsius) -40 °C Minimum Operating Temperature (Fahrenheit) -40 °F Overall Length (Imperial) 180 yd Overall Length (Metric) 164.59 m Overall Width (Imperial) 61 in Overall Width (Metric) 1549.4 mm Primary Liner Polycoated Kraft Product Color Silver Shelf Life 12 Month Tensile Strength (Imperial) 15 lb/in Tensile Strength (Metric) 26.3 N/100mm Total Tape Thickness without Liner (Imperial) 2.7 mil Total Tape Thickness without Liner (Metric) 0.07 mm ECCN EAR99 Harmonized Tariff Schedule Nbr 7607196000 Return Policy Description No Return Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 19 SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 9142.46659 IN3 Base (B) - Customary Gross Weight 104.6089 LB Base (B) - Customary Net Weight 102.31751 LB Base (B) - Metric Net Weight 46.4025 KG Base (B) - Metric Cubic Dimension 149817.6 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 9142.46659 IN3 Shipper (6) - Customary Gross Weight 104.6089 LB Shipper (6) - Customary Net Weight 102.31751 LB Shipper (6) - Customary Height Dimension 62.99213 IN Shipper (6) - Customary Length Dimension 12.04724 IN Shipper (6) - Customary Width Dimension 12.04724 IN Shipper (6) - Metric Weight 47.44168 KG Shipper (6) - Metric Net Weight 46.4025 KG Shipper (6) - Metric Cubic Dimension 149817.6 CCM Shipper (6) - Metric Height Dimension 160.0 CM Shipper (6) - Metric Length Dimension 30.6 CM Shipper (6) - Metric Width Dimension 30.6 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 136998.84054 IN3 Pallet (8) - Customary Gross Weight 1292.13 LB Pallet (8) - Customary Net Weight 1227.81015 LB Pallet (8) - Customary Height Dimension 67.71654 IN Pallet (8) - Customary Length Dimension 48.0315 IN Pallet (8) - Customary Width Dimension 42.12598 IN Pallet (8) - Metric Weight 586.0 KG Pallet (8) - Metric Net Weight 556.83 KG Pallet (8) - Metric Cubic Dimension 2245000.0 CCM Pallet (8) - Metric Height Dimension 172.0 CM Pallet (8) - Metric Length Dimension 122.0 CM Pallet (8) - Metric Width Dimension 107.0 CM Pallet (8) - Item Quantity 12 Pallet (8) - Unit PAL