Main Picture
Scotch-Brite™ Clean and Finish Sheet, 1 in x 1-1/2 in, S ULF, 2500 ea/Case, SPR 22965A
Scotch-Brite™ Clean and Finish Sheet, 1 in x 1-1/2 in, S ULF, 2500 ea/Case, SPR 22965A
3M ID 7100170712 SAP ID 7100170712 Legacy SKU 61500400850 Product Number CF-SH Base SKU B40071131 Keywords scotch brite sheets, scotch brite material Brand Scotch-Brite™ Global Product Hierarchy Non-woven Sheets & Rolls Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060054550 Unit of Use (1) - Article Number 00638060054550 Shipper (6) - Article Number 50638060054555 Marketplace Formal Name Scotch-Brite™ Clean and Finish Sheet, 1 in x 1-1/2 in, S ULF, 2500 ea/Case, SPR 22965A Material Description CF-SH S ULF 1 x 1-1/2 IN SPR22965A SH Marketplace Description Scotch-Brite™ Clean and Finish Sheet uses a conformable non-woven web and a variety of mineral types to blend, clean, and finish. It also works well for contour finishing and lacquer finishing and polishing. The sheet is flexible, making it effective for getting into hard-to-reach areas to produce a uniform finish. Marketplace Description Extended The soft abrasive mineral effectively cleans, blends, and conditions metals, wood, composites, and advanced surfaces and is also effective for paint prep. Applications where our Scotch-Brite™ Clean and Finish multi-use sheets are useful include cabinetry, custom woodworking and millwork, furniture, metal fabrication, primary wood and panel processing. Washable and reusable, this non-woven, open-web sheet resists loading to continuously provide consistent conditioning properties throughout the life of the product. Convenient 6 x 9 inch sheet may be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander for large area coverage. Scotch-Brite™ Clean and Finish Sheets are available with silicon carbide, aluminum oxide, or talc abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Talc is a mild abrasive that can be used achieve a satin finish or with polish to create a high gloss finish in topcoat rubbing applications. Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Bullets - Abrasive mineral adhered to non-woven web are ideal for cleaning, blending, finishing, and light coating and corrosion removal
- Can be folded, stacked, or rolled for effective cleaning or conditioning on flat, irregular, or contoured surfaces
- Can be used with polishing compounds to create a gloss finish on wood
- Conformable pad gets into corners and over contoured surfaces to produce a uniform finish
- Open web construction resists loading and rinses clean for repeated use
Abrasive Material Silicon Carbide Attachment Type Non Pertinent Grade Ultra Fine Low Stretch No Overall Length (Imperial) 1.5 in Overall Length (Metric) 38.1 mm Overall Width (Imperial) 1 in Overall Width (Metric) 25.4 mm Product Form Sheet ECCN EAR99 Return Policy Description No Return Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 13 SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 0.64893 IN3 Base (B) - Customary Gross Weight 0.00828 LB Base (B) - Customary Net Weight 0.008 LB Base (B) - Metric Net Weight 0.003628 KG Base (B) - Metric Cubic Dimension 10.634 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 1622.38232 IN3 Shipper (6) - Customary Gross Weight 20.70354 LB Shipper (6) - Customary Net Weight 19.99935 LB Shipper (6) - Customary Height Dimension 5.8 IN Shipper (6) - Customary Length Dimension 25.9 IN Shipper (6) - Customary Width Dimension 10.8 IN Shipper (6) - Metric Weight 9.389362 KG Shipper (6) - Metric Net Weight 9.07 KG Shipper (6) - Metric Cubic Dimension 26585.979 CCM Shipper (6) - Metric Height Dimension 14.732 CM Shipper (6) - Metric Length Dimension 65.786 CM Shipper (6) - Metric Width Dimension 27.432 CM Shipper (6) - Item Quantity 2500 Shipper (6) - Unit CS Pallet (8) - Item Quantity 0