Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4 in x 1/2 in x 1/4 in, Shaft Mount, 10 ea/Case
Main PictureDownload

Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4 in x 1/2 in x 1/4 in, Shaft Mount, 10 ea/Case

Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4 in x 1/2 in x 1/4 in, Shaft Mount, 10 ea/Case

  • 3M ID7100173799
    SAP ID7100173799
    Legacy SKU61500303492
    Product NumberXO-DC
    Base SKUB5005028017
    Keywords3M, Scotch-Brite, Clean and Strip XT Pro Disc, abrasive disc, silicon carbide, nylon web, rust removal, paint removal, mill scale removal, coating removal, adhesive removal, surface preparation, industrial maintenance, transportation, manufacturing, high conformability, low vibration, long life, sharp abrasive grain, consistent cutting, high-speed rating, non-woven nylon fibers, resin bond, fine finish, workpiece edges, low spark, increased productivity, angle grinder, re-engineered fiber, metal cleaning, weld polishing.
    BrandScotch-Brite™
    Global Product HierarchyNon-woven Discs
    Commodity1150 - Surface Conditioning Prod
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00638060215685
    Unit of Use (1) - Article Number00638060215685
    Shipper (6) - Article Number50638060215680
  • Marketplace Formal NameScotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4 in x 1/2 in x 1/4 in, Shaft Mount, 10 ea/Case
    Material DescriptionXO-DC S XCRS 4 x 1/2 x 1/4in 10 DC
    Marketplace DescriptionScotch-Brite™ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.
    Marketplace Description ExtendedTake Advantage of High Conformability. With its re-engineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them and works in hard-to-reach areas without damaging the substrate. In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence. To engineer our Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive. Applications include rust removal, paint removal, mill scale removal, coating removal, adhesive removal, and surface preparation.
    Bullets
    • CONFORMABLE: High conformability provides a larger contact patch for faster removal rates, enhancing productivity
    • CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
    • PERFORMANCE WITHOUT COMPROMISE: Higher cut rate, longer life, low vibration and low spark
    • RE-ENGINEERED FIBER: High strength fiber resists chunking and performs well on edges
    • RECOMMENDED APPLICATIONS: Cleaning, finishing, surface preparation, rust removal, light scale removal and coating removal
    • SHARP ABRASIVE GRAIN: Silicon carbide mineral cuts aggressively and leaves a fine finish
    • WORKS EFFICIENTLY AND FAST: Quickly removes rust, paint, light mill scale and coatings from metal
  • Abrasive MaterialSilicon Carbide
    Application
    • Corrosion Removal
    • Weld Preparation
    • Surface Preparation for Painting
    • Paint Removal
    • Stripping
    • Strip Paint to Metal
    • Weld discolouration removal (stainless steel)
    • Surface Preparation
    • Sealant Removal
    • Descaling
    • Paint Stripping
    • Mill Scale Removal
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    • Oxide Removal
  • Attachment TypeShaft
    Backing MaterialNon-woven
  • Center Hole Thread SizeNon Pertinent
  • Density0.0
    Disc TypeNon Pertinent
  • GradeExtra Coarse
    GritNon Pertinent
  • Maximum Speed12000 rpm
  • Overall Diameter (Imperial)4 in
    Overall Diameter (Metric)101.6 mm
    Overall Width (Imperial)0.5 in
    Overall Width (Metric)12.7 mm
  • Product ColorPurple
    Product FormDisc
  • Sub Applications
    • Light Coating Removal
    • Paint Removal
    • Strip Paint to Metal
    • Sealant Removal
    • Descaling
    • Paint Stripping
    • Prepping Metal Prior to Paint
    • Pre-Paint Scuffing
    • Weld Cleaning
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    Substrate
    • Oxide
    • Stainless Steel
    • Aluminum
    • Paint
    • Sealer
    • Carbon Steel
    • Soft Rubber
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr6805301000
    Sales unitEA
    SAP Shelf Life In Days3650
    Target Warehouse Location Lead Time2 days
    SAP External Material Group31191506
  • Base (B) - Billing UnitEA
    Base (B) - Customary Cubic Dimension35.79917 IN3
    Base (B) - Customary Gross Weight0.11892 LB
    Base (B) - Customary Net Weight0.09001 LB
    Base (B) - Metric Net Weight0.040823 KG
    Base (B) - Metric Cubic Dimension586.641 CCM
    Base (B) - Previous Packaging Level Quantity0.00
    Base (B) - Item Quantity1
    Base (B) - Total Unit Quantity0.00
    Base (B) - UnitEA
    Base (B) - Pallet Layer Quantity8.00
    Base (B) - Shipping Container Per Layer Quantity20
  • Consumer (2) - Item Quantity0
  • Inner (3) - Item Quantity0
  • Shipper (6) - Billing UnitEA
    Shipper (6) - Customary Cubic Dimension357.99219 IN3
    Shipper (6) - Customary Gross Weight1.1892 LB
    Shipper (6) - Customary Net Weight0.90015 LB
    Shipper (6) - Customary Height Dimension4.82992 IN
    Shipper (6) - Customary Length Dimension8.70984 IN
    Shipper (6) - Customary Width Dimension8.50984 IN
    Shipper (6) - Metric Weight0.539321 KG
    Shipper (6) - Metric Net Weight0.40823 KG
    Shipper (6) - Metric Cubic Dimension5866.418 CCM
    Shipper (6) - Metric Height Dimension12.268 CM
    Shipper (6) - Metric Length Dimension22.123 CM
    Shipper (6) - Metric Width Dimension21.615 CM
    Shipper (6) - Previous Packaging Level Quantity10.00
    Shipper (6) - Previous Packaging Level UnitEACH
    Shipper (6) - Item Quantity10
    Shipper (6) - Total Unit Quantity10.00
    Shipper (6) - Item UnitEACH
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitEA
    Pallet (8) - Customary Cubic Dimension90742.66187 IN3
    Pallet (8) - Customary Gross Weight227.115 LB
    Pallet (8) - Customary Net Weight144.02399 LB
    Pallet (8) - Customary Height Dimension45 IN
    Pallet (8) - Customary Length Dimension48 IN
    Pallet (8) - Customary Width Dimension42 IN
    Pallet (8) - Metric Weight103.0 KG
    Pallet (8) - Metric Net Weight65.317 KG
    Pallet (8) - Metric Cubic Dimension1487000.0 CCM
    Pallet (8) - Metric Height Dimension114.3 CM
    Pallet (8) - Metric Length Dimension121.92 CM
    Pallet (8) - Metric Width Dimension106.68 CM
    Pallet (8) - Previous Packaging Level Quantity160.00
    Pallet (8) - Previous Packaging Level UnitBOX
    Pallet (8) - Item Quantity1600
    Pallet (8) - Total Unit Quantity1600.00
    Pallet (8) - Item UnitEACH
    Pallet (8) - UnitPAL
    Pallet (8) - Pallet Layer Quantity8.00
    Pallet (8) - Shipping Container Per Layer Quantity20