Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4-1/2 in x 5/8"-11, Type 27, 10 ea/Case, Single Pack
Main PictureDownload

Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4-1/2 in x 5/8"-11, Type 27, 10 ea/Case, Single Pack

Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4-1/2 in x 5/8"-11, Type 27, 10 ea/Case, Single Pack

  • 3M ID7100176093
    SAP ID7100176093
    Legacy SKU61500304078
    Product NumberXO-DC
    Base SKUB5005028017
    Keywords
    • 3M, Scotch-Brite, Clean and Strip XT Pro Disc, abrasive disc, silicon carbide, nylon web, rust removal, paint removal, mill scale removal, coating removal, adhesive removal, surface preparation, industrial maintenance, transportation, manufacturing, high conformability, low vibration, long life, sharp abrasive grain, consistent cutting, high-speed rating, non-woven nylon fibers, resin bond, fine finish, workpiece edges, low spark, increased productivity, angle grinder, re-engineered fiber, metal cleaning, weld polishing.
    • abrasives metalworking metal conditioning prep right angle wire wheel brush blaze orange norton XT coating removal extra cut SiC XO DB safety safe
    BrandScotch-Brite™
    Global Product HierarchyNon-woven Discs
    Commodity1150 - Surface Conditioning Prod
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00638060299005
    Consumer (2) - Article Number00638060299005
    Shipper (6) - Article Number50638060299000
  • Marketplace Formal NameScotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4-1/2 in x 5/8"-11, Type 27, 10 ea/Case, Single Pack
    Material DescriptionXO-DC SXCRS 4-1/2x5/8in-11 T27 10 1P DC
    Marketplace DescriptionScotch-Brite™ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.
    Marketplace Description ExtendedTake Advantage of High Conformability. With its re-engineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them and works in hard-to-reach areas without damaging the substrate. In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence. To engineer our Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive. Applications include rust removal, paint removal, mill scale removal, coating removal, adhesive removal, and surface preparation.
    Bullets
    • CONFORMABLE: High conformability provides a larger contact patch for faster removal rates, enhancing productivity
    • CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
    • PERFORMANCE WITHOUT COMPROMISE: Higher cut rate, longer life, low vibration and low spark
    • RE-ENGINEERED FIBER: High strength fiber resists chunking and performs well on edges
    • RECOMMENDED APPLICATIONS: Cleaning, finishing, surface preparation, rust removal, light scale removal and coating removal
    • SHARP ABRASIVE GRAIN: Silicon carbide mineral cuts aggressively and leaves a fine finish
    • WORKS EFFICIENTLY AND FAST: Quickly removes rust, paint, light mill scale and coatings from metal
  • Abrasive MaterialSilicon Carbide
    Application
    • Corrosion Removal
    • Weld Preparation
    • Surface Preparation for Painting
    • Paint Removal
    • Stripping
    • Strip Paint to Metal
    • Weld discolouration removal (stainless steel)
    • Surface Preparation
    • Sealant Removal
    • Descaling
    • Paint Stripping
    • Mill Scale Removal
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    • Oxide Removal
  • Attachment TypeThreaded
    Backing MaterialNon-woven
  • Center Hole Thread Size5/8-11
  • Density0.0
    Disc TypeT27
  • GradeExtra Coarse
    GritNon Pertinent
  • Maximum Speed13300 rpm
  • Overall Diameter (Imperial)4.5 in
    Overall Diameter (Metric)114.3 mm
  • Product ColorPurple
    Product FormDisc
  • Sub Applications
    • Light Coating Removal
    • Paint Removal
    • Strip Paint to Metal
    • Sealant Removal
    • Descaling
    • Paint Stripping
    • Prepping Metal Prior to Paint
    • Pre-Paint Scuffing
    • Weld Cleaning
    • Coating Removal
    • Rust Removal
    • Paint Preparation
    Substrate
    • Oxide
    • Stainless Steel
    • Aluminum
    • Paint
    • Sealer
    • Carbon Steel
    • Soft Rubber
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr6805301000
    Return Policy DescriptionNo Return
    Sales unitEA
    SAP Shelf Life In Days3650
    Target Warehouse Location Lead Time2 days
    SAP External Material Group31191506
  • Base (B) - Billing UnitEA
    Base (B) - Customary Cubic Dimension37.62409 IN3
    Base (B) - Customary Gross Weight0.38206 LB
    Base (B) - Customary Net Weight0.23814 LB
    Base (B) - Customary Height Dimension1.56299 IN
    Base (B) - Customary Length Dimension4.93799 IN
    Base (B) - Customary Width Dimension4.8748 IN
    Base (B) - Metric Net Weight0.108 KG
    Base (B) - Metric Cubic Dimension616.546 CCM
    Base (B) - Metric Height Dimension3.97 CM
    Base (B) - Metric Length Dimension12.5425 CM
    Base (B) - Metric Width Dimension12.382 CM
    Base (B) - Item Quantity1
    Base (B) - UnitEA
  • Consumer (2) - Billing UnitEA
    Consumer (2) - Customary Cubic Dimension37.62409 IN3
    Consumer (2) - Customary Gross Weight0.38206 LB
    Consumer (2) - Customary Net Weight0.23814 LB
    Consumer (2) - Customary Height Dimension1.56299 IN
    Consumer (2) - Customary Length Dimension4.93799 IN
    Consumer (2) - Customary Width Dimension4.8748 IN
    Consumer (2) - Metric Weight0.173272 KG
    Consumer (2) - Metric Net Weight0.108 KG
    Consumer (2) - Metric Cubic Dimension616.546 CCM
    Consumer (2) - Metric Height Dimension3.97 CM
    Consumer (2) - Metric Length Dimension12.5425 CM
    Consumer (2) - Metric Width Dimension12.382 CM
    Consumer (2) - Item Quantity1
    Consumer (2) - UnitEA
  • Inner (3) - Item Quantity0
  • Shipper (6) - Billing UnitEA
    Shipper (6) - Customary Cubic Dimension641.10136 IN3
    Shipper (6) - Customary Gross Weight4.45079 LB
    Shipper (6) - Customary Net Weight2.3814 LB
    Shipper (6) - Customary Height Dimension5.59055 IN
    Shipper (6) - Customary Length Dimension10.70866 IN
    Shipper (6) - Customary Width Dimension10.70866 IN
    Shipper (6) - Metric Weight2.0185 KG
    Shipper (6) - Metric Net Weight1.08 KG
    Shipper (6) - Metric Cubic Dimension10505.728 CCM
    Shipper (6) - Metric Height Dimension14.2 CM
    Shipper (6) - Metric Length Dimension27.2 CM
    Shipper (6) - Metric Width Dimension27.2 CM
    Shipper (6) - Item Quantity10
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitEA
    Pallet (8) - Customary Cubic Dimension85067.4315 IN3
    Pallet (8) - Customary Gross Weight410.13 LB
    Pallet (8) - Customary Net Weight200.0376 LB
    Pallet (8) - Customary Height Dimension44.09449 IN
    Pallet (8) - Customary Length Dimension48.0315 IN
    Pallet (8) - Customary Width Dimension40.15748 IN
    Pallet (8) - Metric Weight186.0 KG
    Pallet (8) - Metric Net Weight90.72 KG
    Pallet (8) - Metric Cubic Dimension1394000.0 CCM
    Pallet (8) - Metric Height Dimension112.0 CM
    Pallet (8) - Metric Length Dimension122.0 CM
    Pallet (8) - Metric Width Dimension102.0 CM
    Pallet (8) - Item Quantity840
    Pallet (8) - UnitPAL