3M™ Cold Shrink QS-III Splice Kit 5526A-1000-AL, 25/28 kV, Standard, 1/case
Main PictureDownload

3M™ Cold Shrink QS-III Splice Kit 5526A-1000-AL, 25/28 kV, Standard, 1/case

3M™ Cold Shrink QS-III Splice Kit 5526A-1000-AL, 25/28 kV, Standard, 1/case

  • 3M ID7100177964
    SAP ID7100177964
    Legacy SKU80611231772
    Part Number5526A-1000-AL
    Local Catalog Identifier5526A-1000-AL
    Base SKUB5005113029
    Keywords3M, 3M™ Cold Shrink, cold shrink splices, cable splices, QS-III Inline Shielded Cable Splice Kits, inline splice, shielded power cables, tape shield cable splice, wire shield cable splice, UniShield® cable splice, longitudinally corrugated shielded cables, electrical stress reduction, feeder circuits, distribution circuits, size transition splicing, direct burial cable splice, submerged cable splice, silicone rubber splice, EPDM rubber jacket, high voltage cable splice, partial discharge tested, AC reliability, IEEE 404 compliant, energy market, data center market, electrical equipment manufacturing.
    Brand3M™
    Global Product HierarchyCold Shrink Splices
    Commodity2320 - Cable Acc,CS and L&M
    Extended Intended Use Disclaimer3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
    Intended Use DisclaimerFor industrial/occupational use only. Not for consumer sale or use.
  • Base (B) - Article Number00054007429067
    Unit of Use (1) - Article Number00054007429067
    Shipper (6) - Article Number50054007429062
  • Marketplace Formal Name3M™ Cold Shrink QS-III Splice Kit 5526A-1000-AL, 25/28 kV, Standard, 1/case
    Material Description5526A-1000-AL QSIII SPLICE KIT
    Marketplace Description3M™ Cold Shrink QS-III Inline Shielded Cable Splices 5524A, 5525A and 5526A Series are inline splices for joining 25/28 kV tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design.
    Marketplace Description ExtendedThe cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to ensure reliability. Kits can be ordered with connectors packed in the kit, or the kit and connector can be ordered as separate items. Meets requirements of IEEE 404. Each kit makes one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
    Bullets
    • Designed for inline splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations
    • High-voltage, production-tested for partial discharge and AC ensure reliability
    • Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
    • Rated for 25/28 kV cables
    • Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
    • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
  • Cable Shielding
    • Longitudinally Corrugated (LC)
    • Tape Shield
    • Wire Shield
    • UniShield®
  • Conductor MaterialAluminum
    Conductor Sizes (Imperial)1000 kcmil
  • Insulation Outer Diameter (Imperial)
    • 1.24 in
    • 1.25 in
    • 1.26 in
    • 1.27 in
    • 1.28 in
    • 1.29 in
    • 1.3 in
    • 1.31 in
    • 1.32 in
    • 1.33 in
    • 1.34 in
    • 1.35 in
    • 1.36 in
    • 1.37 in
    • 1.38 in
    • 1.39 in
    • 1.4 in
    • 1.41 in
    • 1.42 in
    • 1.43 in
    • 1.44 in
    • 1.45 in
    • 1.46 in
    • 1.47 in
    • 1.48 in
    • 1.49 in
    • 1.5 in
    • 1.51 in
    • 1.52 in
    • 1.53 in
    • 1.54 in
    • 1.55 in
    • 1.56 in
    • 1.57 in
    • 1.58 in
    • 1.59 in
    • 1.6 in
    • 1.61 in
    • 1.62 in
    • 1.63 in
    • 1.64 in
    • 1.65 in
    • 1.66 in
    • 1.67 in
    • 1.68 in
    • 1.69 in
    • 1.7 in
    • 1.71 in
    • 1.72 in
    • 1.73 in
    • 1.74 in
    • 1.75 in
    • 1.76 in
    • 1.77 in
    • 1.78 in
    • 1.79 in
    • 1.8 in
    • 1.81 in
    • 1.82 in
    • 1.83 in
    • 1.84 in
    • 1.85 in
    • 1.86 in
    • 1.87 in
    • 1.88 in
    • 1.89 in
    • 1.9 in
    • 1.91 in
    • 1.92 in
    • 1.93 in
    • 1.94 in
    • 1.95 in
    • 1.96 in
    • 1.97 in
    • 1.98 in
    • 1.99 in
    • 2 in
    • 2.01 in
    • 2.02 in
    • 2.03 in
    • 2.04 in
    • 2.05 in
    • 2.06 in
    • 2.07 in
  • MaterialSilicone Rubber
  • Number of Conductors1
  • Splice TypeCold Shrink
  • Voltage25/28 kV
  • ECCNEAR99
    Harmonized Tariff Schedule Nbr8546900000
    Sales unitKIT
    SAP Shelf Life In Days36
    Target Warehouse Location Lead Time60
    SAP External Material Group26121600
  • Base (B) - Billing UnitKIT
    Base (B) - Customary Cubic Dimension1642.49338 IN3
    Base (B) - Customary Gross Weight13.00222 LB
    Base (B) - Customary Net Weight12.02376 LB
    Base (B) - Metric Net Weight5.452951 KG
    Base (B) - Metric Cubic Dimension26915.539 CCM
    Base (B) - Item Quantity1
    Base (B) - UnitKIT
  • Consumer (2) - Item Quantity0
  • Inner (3) - Item Quantity0
  • Shipper (6) - Billing UnitKIT
    Shipper (6) - Customary Cubic Dimension1642.46049 IN3
    Shipper (6) - Customary Gross Weight13.00222 LB
    Shipper (6) - Customary Net Weight12.02376 LB
    Shipper (6) - Customary Height Dimension8.3 IN
    Shipper (6) - Customary Length Dimension25.7 IN
    Shipper (6) - Customary Width Dimension7.7 IN
    Shipper (6) - Metric Weight5.8967 KG
    Shipper (6) - Metric Net Weight5.452951 KG
    Shipper (6) - Metric Cubic Dimension26915.0 CCM
    Shipper (6) - Metric Height Dimension21.082 CM
    Shipper (6) - Metric Length Dimension65.278 CM
    Shipper (6) - Metric Width Dimension19.558 CM
    Shipper (6) - Item Quantity1
    Shipper (6) - UnitCS
  • Pallet (8) - Billing UnitKIT
    Pallet (8) - Customary Cubic Dimension94709.22072 IN3
    Pallet (8) - Customary Gross Weight685.11555 LB
    Pallet (8) - Customary Net Weight601.18884 LB
    Pallet (8) - Customary Height Dimension47 IN
    Pallet (8) - Customary Length Dimension48 IN
    Pallet (8) - Customary Width Dimension42 IN
    Pallet (8) - Metric Weight310.71 KG
    Pallet (8) - Metric Net Weight272.648 KG
    Pallet (8) - Metric Cubic Dimension1552000.0 CCM
    Pallet (8) - Metric Height Dimension119.38 CM
    Pallet (8) - Metric Length Dimension121.92 CM
    Pallet (8) - Metric Width Dimension106.68 CM
    Pallet (8) - Item Quantity50
    Pallet (8) - UnitPAL