Main Picture
3M™ Double Coated Tape 469, Red, 1 in x 60 yd, 5.5 mil, 36 Rolls/Case
3M™ Double Coated Tape 469, Red, 1 in x 60 yd, 5.5 mil, 36 Rolls/Case
3M ID 7100222615 SAP ID 7100222615 Legacy SKU 70007543120 Product Number 469 Base SKU B40070419 Keywords 3M, Double Coated Tape, High Tack Tape, High Temperature Tape, Acrylic Adhesive Tape, Tissue Tape, Flying Splices Tape, Printing Tape, UV Resistant Tape, Solvent Resistant Tape, Hand Tearable Tape, Paper Splicing Tape, High Heat Resistance Tape, High Speed Splicing Tape, Core Starting Tape, Double Coated Tissue Tape, Quick Stick Tape, Adhesion Tape, Dissimilar Substrate Bonding, Splice Identification Tape, High Initial Adhesion Tape, Low Surface Energy Plastics Tape, Densified Kraft Paper Liner Tape, High Performance Tape, Temperature Resistant Tape, Tearable Adhesive Tape, Double Coated Tissue Carrier Tape, Manual Tape Dispenser, Automatic Tape Dispenser, Web Processing Tape, Construction Tape, Fabrication Tape, Arts and Hobby Tape, Automotive Tape, Commercial Solutions Tape, Electronics Tape, Manufacturing Tape, Transportation Tape, Appliance Tape, Bonding and Assembly Tape, Building Maintenance Tape, Repair Tape, Consumer Electronics Tape, Defense Tape Brand 3M™ Global Product Hierarchy Bonding Tapes Commodity 2660 - Flexographic & Splicing Tapes Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060405970 Unit of Use (1) - Article Number 00638060405970 Shipper (6) - Article Number 50638060405975 Marketplace Formal Name 3M™ Double Coated Tape 469, Red, 1 in x 60 yd, 5.5 mil, 36 Rolls/Case Material Description 469 DC Tape RD 1INX60YD 36/CV Marketplace Description 3M™ Double Coated Tape 469 is a high tack, high temperature premium double coated tissue tape. It features a medium firm acrylic adhesive with quick stick. These features make it an ideal choice for high-speed flying splices on most grades of paper and other printing applications. Marketplace Description Extended Easy Handling and Identification Our 3M™ Double Coated Tape 469 is a 5.5 mil, red tinted tape with a premium double coated tissue carrier. The carrier is mounted on a 72 lb. densified kraft paper liner for ease of deployment and handling. Additionally, this tape features good initial adhesion and will bond to a variety of similar and dissimilar materials including low surface energy plastics and a variety of paper grades and thicknesses. This tape performs well in high temperature applications. 3M double coated tape 469 offers very good heat resistance. In short term intervals it can withstand 350°F/180°C. For long term applications, this tape will perform in temperatures up to 200°F/84°C. Results may vary depending on machine and web tensions, nature of paper surface and application pressure. Additionally, 3M™ Double Coated Tape 469 offers excellent UV resistance and high solvent resistance, making it ideal for demanding print applications. Recommended Applications • High speed flying splices on most grades of paper • Splices that require visibility • Applications which require high temperature drying ovens • Core starting High Temperature Adhesion 3M™ Double Coated Tape 469 employs a medium-firm, high tack acrylic adhesive system. This adhesive features high initial adhesion, excellent UV resistance and high solvent resistance. The design of the adhesive combined with the film carrier results in a balance between shear strength, high initial adhesion and temperature performance. The formulation gives the acrylic adhesive a consistently strong bond across a range of temperatures. In short term intervals, it can withstand 350°F/180°C. For long term applications, this tape will perform in temperatures up to 200°F/84°C. A thin tissue carrier between the adhesive layers improves the handling and strength of the tape. What is Double Coated Tape? In general, double coated tape is composed of a paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in web processing, construction, fabrication, arts and hobby industries. Bullets - Excellent UV and good humidity resistance to ensure performance in a variety of situations
- Hand-tearable tissue carrier for easy handling
- High heat resistance allows tape to perform at temperatures up to 350°F/180°C for short term intervals
- High tack and adhesion make it ideal for bonding a variety of similar and dissimilar substrates
- Light red tint to assist in quickly identifying and discarding splices
Backing (Carrier) Thickness (Metric) 0.03 mm Overall Length (Imperial) 60 yd Overall Length (Metric) 54.864 m Overall Width (Imperial) 1 in Overall Width (Metric) 25.4 mm Product Color Red ECCN EAR99 Harmonized Tariff Schedule Nbr 4811412100 Return Policy Description 0-30d:0%;31-180:15%;>180:no return Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 2 days SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 61.36419 IN3 Base (B) - Customary Gross Weight 0.99161 LB Base (B) - Customary Net Weight 0.92816 LB Base (B) - Metric Net Weight 0.420933 KG Base (B) - Metric Cubic Dimension 1005.575 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 2209.11271 IN3 Shipper (6) - Customary Gross Weight 35.69811 LB Shipper (6) - Customary Net Weight 33.41366 LB Shipper (6) - Customary Height Dimension 11.6 IN Shipper (6) - Customary Length Dimension 13.8 IN Shipper (6) - Customary Width Dimension 13.8 IN Shipper (6) - Metric Weight 16.18962 KG Shipper (6) - Metric Net Weight 15.153588 KG Shipper (6) - Metric Cubic Dimension 36200.73 CCM Shipper (6) - Metric Height Dimension 29.464 CM Shipper (6) - Metric Length Dimension 35.052 CM Shipper (6) - Metric Width Dimension 35.052 CM Shipper (6) - Item Quantity 36 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 100872.64295 IN3 Pallet (8) - Customary Gross Weight 999.16929 LB Pallet (8) - Customary Net Weight 902.16914 LB Pallet (8) - Customary Height Dimension 43.30709 IN Pallet (8) - Customary Length Dimension 52.3622 IN Pallet (8) - Customary Width Dimension 44.48819 IN Pallet (8) - Metric Weight 453.138 KG Pallet (8) - Metric Net Weight 409.147 KG Pallet (8) - Metric Cubic Dimension 1653000.0 CCM Pallet (8) - Metric Height Dimension 110.0 CM Pallet (8) - Metric Length Dimension 133.0 CM Pallet (8) - Metric Width Dimension 113.0 CM Pallet (8) - Item Quantity 972 Pallet (8) - Unit PAL