Main Picture
3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21020, White, 18 in x 36 yd, 20 mil, 1 Roll/Case
3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21020, White, 18 in x 36 yd, 20 mil, 1 Roll/Case
3M ID 7100299557 SAP ID 7100299557 Legacy SKU 70007550570 Product Number L1020A Base SKU B5005022007 Keywords 3M, Cushion-Mount Pro Plate Mounting Tape, Comply Adhesive System, white foam tape, flexographic printing, photopolymer print plates, print sleeves, steel cylinders, air release feature, sticky-back tape, high-quality print, double-coated foam, plate edge lift prevention, easy plate removal, ink-contaminated plates, solids and process printing, halftone dots, no air bubbles, crosshatch pattern, adhesive grooves, standard density foam, no adhesive residue, clean removal, productive printing, bubble-free mounting, predictable print results, ink contaminant tolerance, dependable adhesive, high-speed print runs, flexographic printers, flexible packaging industry, tight print registration, compressible foam, differential acrylate adhesives, mount photopolymer plates, mounting cylinders, micro-channels, setup efficiency, cleaner print quality. Brand Cushion-Mount™ Global Product Hierarchy Flexographic Plate Mounting Tapes Commodity 2660 - Flexographic & Splicing Tapes Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00068060004529 Unit of Use (1) - Article Number 00068060004529 Shipper (6) - Article Number 50068060004524 Marketplace Formal Name 3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21020, White, 18 in x 36 yd, 20 mil, 1 Roll/Case Material Description 21020 PLT MNTG TP WT 18INX36YD 1/CV Marketplace Description 3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21020 White is designed for mounting flexographic photopolymer print plates to print sleeves or steel cylinders. It features the Comply™ Adhesive System, which has the air release feature designed into the tape. This plate-mounting sticky-back white foam tape provides high-quality standard print. Marketplace Description Extended Optimal, Consistent, Productive Flexographic Plate Mounting 3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21020 White is a white foam tape that provides high quality standard combination print. It has the air release feature designed into the tape to allow for bubble-free mounting and predictable, repeatable print results. This flexographic plate mounting tape is tolerant of ink contaminants and has a dependable adhesive that resists lifting on press yet removes cleanly from the print plate and the cylinder or sleeve. It is up to 78% easier to remove the flexographic photopolymer plate from this tape* and up to 54% easier to remove the tape from a sleeve** to help keep print operations productive. *Compared to 3M™ Cushion-Mount™ Plus H-Series Plate Mounting Tapes ** Compared to 3M™ Cushion-Mount™ Plus E-, H- and L-Series Plate Mounting Tapes Recommended Applications • Flexographic printing, flexographic printers • Mounting photopolymer plates to flexographic printing cylinders and sleeves • Used in combination, process and solid printing processes • 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high-speed print runs. This cushion tape is manufactured for 20 mil applications. It is constructed with differential acrylate adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting photopolymer plates. The adhesive on the non-linered (sleeve / cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. On Easy with Reduced Air Entrapment The 3M™ Comply™ Adhesive System features a crosshatch pattern of unique micro-channels that allow air to escape more easily than from mounting tapes using a pebbled or flat adhesive surface. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. Where Science Meets Craft Printers are passionate about every job looking the best it can. For decades, 3M products have been there helping to improve the quality of the work that goes out and the efficiency of how it gets done. Bullets - 0.020 inch (0.51 mm) double coated standard density white foam tape
- Allows clean, one-piece tape removal without scoring or damaging the print sleeve
- Designed to be easily removed from ink-contaminated print plates
- Grooves in the adhesive are created by a crosshatch pattern from the release liner
- Ideal for printing combinations of solids and process with halftone dots
- Plate demounts from the tape without adhesive residue to help reduce plate damage and increase efficiency
- Securely bonds flexographic plate to sleeve or cylinder to prevent plate edge lift during printing
- Up to 78% easier to remove plate from tape*; up to 54% easier to remove tape from sleeve**
- Virtually no air bubbles under the plate or tape due to the air release feature designed into the tape
- White foam color indicates the standard density foam
Backing Material Foam Overall Length (Imperial) 36 yd Overall Length (Metric) 32.918 m Overall Width (Imperial) 18 in Overall Width (Metric) 457.2 mm Product Color White Total Tape Thickness without Liner (Imperial) 20 mil Total Tape Thickness without Liner (Metric) 0.508 mm Return Policy Description No Return Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 29 SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 1419.78196 IN3 Base (B) - Customary Gross Weight 13.93838 LB Base (B) - Customary Net Weight 12.8772 LB Base (B) - Metric Net Weight 5.840001 KG Base (B) - Metric Cubic Dimension 23265.967 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 1419.78214 IN3 Shipper (6) - Customary Gross Weight 13.93838 LB Shipper (6) - Customary Net Weight 12.8772 LB Shipper (6) - Customary Height Dimension 8.75 IN Shipper (6) - Customary Length Dimension 19.3748 IN Shipper (6) - Customary Width Dimension 8.3748 IN Shipper (6) - Metric Weight 6.321263 KG Shipper (6) - Metric Net Weight 5.840001 KG Shipper (6) - Metric Cubic Dimension 23265.97 CCM Shipper (6) - Metric Height Dimension 22.225 CM Shipper (6) - Metric Length Dimension 49.212 CM Shipper (6) - Metric Width Dimension 21.272 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 98248.6117 IN3 Pallet (8) - Customary Gross Weight 872.14806 LB Pallet (8) - Customary Net Weight 772.632 LB Pallet (8) - Customary Height Dimension 48.75 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 395.532 KG Pallet (8) - Metric Net Weight 350.4 KG Pallet (8) - Metric Cubic Dimension 1610000.0 CCM Pallet (8) - Metric Height Dimension 123.825 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 60 Pallet (8) - Unit PAL