Main Picture
Scotch-Brite™ Cut and Polish Unitized Disc, CP-UD, 7A Medium, 4-1/2 in x 7/8 in, Type 27, Nylon, 5 ea/Case
Scotch-Brite™ Cut and Polish Unitized Disc, CP-UD, 7A Medium, 4-1/2 in x 7/8 in, Type 27, Nylon, 5 ea/Case
3M ID 7100300851 SAP ID 7100300851 Legacy SKU 61500409547 Product Number CP-UD Base SKU B40065176 Keywords non woven disc, surface disc, grinding disc Brand Scotch-Brite™ Global Product Hierarchy Non-woven Discs Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00068060661395 Unit of Use (1) - Article Number 00068060661395 Shipper (6) - Article Number 50068060661390 Marketplace Formal Name Scotch-Brite™ Cut and Polish Unitized Disc, CP-UD, 7A Medium, 4-1/2 in x 7/8 in, Type 27, Nylon, 5 ea/Case Material Description CP-UD 7A MED 4-1/2 x 7/8in T27 NYL 5 DC Marketplace Description The Scotch-Brite™ Cut and Polish Unitized Disc was engineered to tackle your toughest deburring, blending and finishing needs. It assumes unitized form, meaning layers of abrasive material are compressed together to remove burrs and imperfections without wearing easily. As a disc, it also has great portability – moving in, on, over and around the workpiece. Marketplace Description Extended Working Hard on Hard Metals : Our Scotch-Brite™ Cut and Polish Unitized Disc may be used as an alternative to conventional abrasive products such as rubber bonded discs and small set-up discs. It provides a consistent finish without cutting into the workpiece, reducing or even eliminating intermediate steps. Constructed with aluminum oxide mineral coated on a tough nylon web, this versatile disc is great for use on harder metals like stainless steel, carbon steel and high nickel alloys. The aluminum oxide disc may be used with regular attachment systems and fastened to a portable tool, such as a die grinder. The disc can be brought in direct contact with the workpiece and helps users tackle hard-to-reach areas. The Cut and Polish Unitized Disc is available in two grades, fine (FIN) and medium (MED), so users may choose the right grade for their specific application. Typically, finer grades are used when operators desire a softer cut and finer finish. Conversely, a medium grade would be used when operators desire a more aggressive cut and coarser finish. The Scotch-Brite™ Advantage: Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into nonwoven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open- web material is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers and yielding consistent results - part after part. Bullets - AGGRESSIVE CUT: Dense construction provides enhanced cutting performance on harder metals
- EASIER ACCESS TO HARD-TO-REACH AREAS: Compatible with portable disc sander for enhanced maneuverability
- ENHANCED LOAD RESISTANCE: Gaps between nylon fibers permit debris to escape
- FAST CUTTING AND CONSISTENTLY BRIGHT FINISH: Durable, aggressive disc with high concentration of abrasive mineral maintains performance throughout its lifespan
- REDUCES FINISHING PROCESS STEPS: Flexible open web responds to surface irregularities to prevent undercutting or gouging
Abrasive Material Aluminum Oxide Attachment Type Center Hole Backing Material Non-woven Center Hole Diameter (Imperial) 0.875 in Center Hole Diameter (Metric) 22.225 mm Center Hole Thread Size Non Pertinent Density 7 None Disc Type T27 Grade Medium Grit Non Pertinent Maximum Speed 13300 rpm Overall Diameter (Imperial) 4.5 in Overall Diameter (Metric) 114.3 mm Product Form Disc Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 33 SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 46.02893 IN3 Base (B) - Customary Gross Weight 0.33586 LB Base (B) - Customary Net Weight 0.28805 LB Base (B) - Metric Net Weight 0.130634 KG Base (B) - Metric Cubic Dimension 754.276 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 230.14487 IN3 Shipper (6) - Customary Gross Weight 1.67929 LB Shipper (6) - Customary Net Weight 1.44024 LB Shipper (6) - Customary Height Dimension 6.2 IN Shipper (6) - Customary Length Dimension 6.4 IN Shipper (6) - Customary Width Dimension 5.8 IN Shipper (6) - Metric Weight 0.761581 KG Shipper (6) - Metric Net Weight 0.65317 KG Shipper (6) - Metric Cubic Dimension 3771.384 CCM Shipper (6) - Metric Height Dimension 15.748 CM Shipper (6) - Metric Length Dimension 16.256 CM Shipper (6) - Metric Width Dimension 14.732 CM Shipper (6) - Item Quantity 5 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 97272.22799 IN3 Pallet (8) - Customary Gross Weight 635.10836 LB Pallet (8) - Customary Net Weight 514.16631 LB Pallet (8) - Customary Height Dimension 48.27992 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 288.031 KG Pallet (8) - Metric Net Weight 233.182 KG Pallet (8) - Metric Cubic Dimension 1594000.0 CCM Pallet (8) - Metric Height Dimension 122.631 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 1785 Pallet (8) - Unit PAL