Main Picture
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020, White, 36 in x 36 yd, 20 mil, 1 Roll/Case
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020, White, 36 in x 36 yd, 20 mil, 1 Roll/Case
3M ID 7100311486 SAP ID 7100311486 Legacy SKU 70007558334 Product Number E1020 Base SKU B40067257 Keywords 3M, Cushion-Mount, Plus Plate Mounting Tape, E1020, flexographic print plates, cylinders, sleeves, white foam mounting tape, high quality print, double coated foam tape, air release feature, medium density foam, secure bond, flexographic photopolymer plate, print sleeve, steel cylinder, plate edge lifting, air bubbles, cross-hatch pattern, adhesive residue, clean removal, flexographic printing, flexographic printers, cushioned tape, sticky back foam tape, recommended applications, photopolymer plates, wide-web presses, flexible packaging industry, tight print registration, compressible foam, high speed print runs, engineered acrylic adhesives, mounting tape, bubble-free mounting, air release liners, unique micro-channels, bubble-free print, higher productivity, clean print quality, commercial solutions, manufacturing, appliance, bonding, assembly, building maintenance, repair, defense, paper and print. Brand Cushion-Mount™ Global Product Hierarchy Flexographic Plate Mounting Tapes Commodity 2660 - Flexographic & Splicing Tapes Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00068060004895 Unit of Use (1) - Article Number 00068060004895 Shipper (6) - Article Number 50068060004890 Marketplace Formal Name 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020, White, 36 in x 36 yd, 20 mil, 1 Roll/Case Material Description E1020 PLT MNTG TAPE WT 36INX36YD 1/CV Marketplace Description 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020 with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This white foam mounting tape provides high quality standard combination print. Marketplace Description Extended Bubble Free Flexographic Plate Mounting 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020 is a white foam tape that provides high quality combination print. This is the standard tape for combination print. It has the air release feature that allows for bubble free mounting. This flexographic plate mounting tape has excellent resistance to lifting on press allowing for easy and clean plate removal. Recommended Applications • Mounting photopolymer plates to flexographic printing cylinders and sleeves • Used in combination, process and solid printing processes • 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs. This cushion tape is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. On Easy with Reduced Air Entrapment 3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. Keep the Presses Running and your Customers Coming Back For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. Bullets - 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to remove with less force from flexographic print plates
- Cushioned flexographic plate mounting sticky back foam tape
- Flexographic printing, flexographic printers
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Has a standard medium density foam that is ideal for printing combinations of solids and process with halftone dots
- Plate easily demounts from the double coated cushioned tape without adhesive residue
- Print plates mounted on E1020 will have no air bubbles under the plate due to the air release feature designed into the tape
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Tape also removes cleanly from the sleeve or steel print cylinder
- White foam color indicates the standard, medium density foam
Adhesive Type Differential Acrylate Application Flexographic Plate Mounting Application Thickness (Imperial) 20 mil Application Thickness (Metric) 0.508 mm Backing Material Polyethylene Foam Overall Length (Imperial) 36 yd Overall Length (Metric) 32.918 m Overall Width (Imperial) 36 in Overall Width (Metric) 914.4 mm Primary Liner Polycoated Polyester Primary Liner Thickness (Imperial) 4.5 mil Primary Liner Thickness (Metric) 0.11 mm Product Color White Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 20 SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 2597.16312 IN3 Base (B) - Customary Gross Weight 27.32967 LB Base (B) - Customary Net Weight 26.32951 LB Base (B) - Metric Net Weight 11.94082 KG Base (B) - Metric Cubic Dimension 42559.712 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 2597.163 IN3 Shipper (6) - Customary Gross Weight 27.32967 LB Shipper (6) - Customary Net Weight 26.32951 LB Shipper (6) - Customary Height Dimension 37.7 IN Shipper (6) - Customary Length Dimension 8.3 IN Shipper (6) - Customary Width Dimension 8.3 IN Shipper (6) - Metric Weight 12.39441 KG Shipper (6) - Metric Net Weight 11.94082 KG Shipper (6) - Metric Cubic Dimension 42559.71 CCM Shipper (6) - Metric Height Dimension 95.758 CM Shipper (6) - Metric Length Dimension 21.082 CM Shipper (6) - Metric Width Dimension 21.082 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 76951.24184 IN3 Pallet (8) - Customary Gross Weight 691.11756 LB Pallet (8) - Customary Net Weight 631.9089 LB Pallet (8) - Customary Height Dimension 38.2 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 313.432 KG Pallet (8) - Metric Net Weight 286.58 KG Pallet (8) - Metric Cubic Dimension 1261000.0 CCM Pallet (8) - Metric Height Dimension 97.028 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 24 Pallet (8) - Unit PAL