Main Picture
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315, Yellow, 13 1/2 in x 36 yd, 15 mil, 1 Roll/Case
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315, Yellow, 13 1/2 in x 36 yd, 15 mil, 1 Roll/Case
3M ID 7100312033 SAP ID 7100312033 Legacy SKU 70007558540 Product Number E1315 Base SKU B40067296 Keywords 3M, Cushion-Mount, Plate Mounting Tape, Flexographic Printing, Photopolymer Plates, Bubble Free Mounting, Medium Soft Foam, Adhesive Technology, Edge Lifting Resistance, Print Sleeve, Print Cylinder, Combination Print, Air Release Feature, High Quality Print, Clean Plate Removal, Narrow Web Presses, Tag and Label Printing, Acrylic Adhesives, Crosshatched Pattern, Reduced Air Entrapment, Tight Print Registration, High-Speed Print Runs, Commercial Solutions, Manufacturing, Appliance Bonding, Building Maintenance, Repair, Defense, Paper & Print Brand Cushion-Mount™ Global Product Hierarchy Flexographic Plate Mounting Tapes Commodity 2660 - Flexographic & Splicing Tapes Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00068060005199 Unit of Use (1) - Article Number 00068060005199 Shipper (6) - Article Number 50068060005194 Marketplace Formal Name 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315, Yellow, 13 1/2 in x 36 yd, 15 mil, 1 Roll/Case Material Description E1315 PLT MNTG TAPE YL 13.5INX36YD 1/CV Marketplace Description 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315 with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This yellow foam mounting tape provides high quality medium soft combination print. Marketplace Description Extended Bubble Free Flexographic Plate Mounting 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315 is a yellow foam tape that provides high quality combination print. This is the medium soft tape for combination print. It has the air release feature that allows for bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal. Recommended Applications • Mounting photopolymer plates to flexographic printing cylinders and sleeves • Used in combination, process and solid printing processes • 3M sticky back tapes are designed for narrow web presses to print tag and labels 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high-speed print runs. This cushion tape is manufactured for 15 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. On Easy with Reduced Air Entrapment 3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. Keep the Presses Running and your Customers Coming Back For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. Bullets - 0.015 inch (0.38 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates
- Cushioned flexographic plate mounting sticky back foam tape
- Flexographic printing, flexographic printers
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner.
- Has a medium soft density foam that is ideal for printing combinations of solids and process with halftone dots
- Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
- Plate demounts from the double coated cushioned tape without adhesive residue
- Print plates mounted on E1315 will have no air bubbles under the plate due to the air release feature designed into the tape
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Tape also removes cleanly from the sleeve or steel print cylinder
- Yellow foam color indicates the medium soft density foam
Adhesive Type Differential Acrylate Application Thickness (Imperial) 15 mil Application Thickness (Metric) 0.381 mm Backing Material Polyethylene Foam Overall Length (Imperial) 36 yd Overall Length (Metric) 32.918 m Overall Width (Imperial) 13.5 in Overall Width (Metric) 342.9 mm Primary Liner Polycoated Polyester Primary Liner Thickness (Imperial) 4.5 mil Primary Liner Thickness (Metric) 0.11 mm Product Color Yellow Shelf Life 24 Month Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 20 SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 1020.94148 IN3 Base (B) - Customary Gross Weight 11.42695 LB Base (B) - Customary Net Weight 9.20657 LB Base (B) - Metric Net Weight 4.175317 KG Base (B) - Metric Cubic Dimension 16730.168 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit ROL Shipper (6) - Customary Cubic Dimension 1020.9416 IN3 Shipper (6) - Customary Gross Weight 11.42695 LB Shipper (6) - Customary Net Weight 9.20657 LB Shipper (6) - Customary Height Dimension 15 IN Shipper (6) - Customary Length Dimension 8.25 IN Shipper (6) - Customary Width Dimension 8.25 IN Shipper (6) - Metric Weight 5.182292 KG Shipper (6) - Metric Net Weight 4.175317 KG Shipper (6) - Metric Cubic Dimension 16730.17 CCM Shipper (6) - Metric Height Dimension 38.1 CM Shipper (6) - Metric Length Dimension 20.955 CM Shipper (6) - Metric Width Dimension 20.955 CM Shipper (6) - Item Quantity 1 Shipper (6) - Unit CS Pallet (8) - Billing Unit ROL Pallet (8) - Customary Cubic Dimension 100384.45109 IN3 Pallet (8) - Customary Gross Weight 892.15182 LB Pallet (8) - Customary Net Weight 690.49355 LB Pallet (8) - Customary Height Dimension 49.8 IN Pallet (8) - Customary Length Dimension 48 IN Pallet (8) - Customary Width Dimension 42 IN Pallet (8) - Metric Weight 404.604 KG Pallet (8) - Metric Net Weight 313.149 KG Pallet (8) - Metric Cubic Dimension 1645000.0 CCM Pallet (8) - Metric Height Dimension 126.492 CM Pallet (8) - Metric Length Dimension 121.92 CM Pallet (8) - Metric Width Dimension 106.68 CM Pallet (8) - Item Quantity 75 Pallet (8) - Unit PAL